Re: [PATCH v4 3/3] PCI: qcom-ep: Add ICC bandwidth voting support

[Krishna Chaitanya Chundru <quic_krichai@quicinc.com>]

On 6/23/2023 11:04 AM, Manivannan Sadhasivam wrote:
> On Wed, Jun 14, 2023 at 07:54:26PM +0530, Krishna chaitanya chundru wrote:
>> Add support to vote for ICC bandwidth based on the link
>> speed and width.
>>
>> This patch is inspired from pcie-qcom driver to add basic
>> interconnect support.
>>
>> Reference: commit c4860af88d0c ("PCI: qcom: Add basic interconnect
>> support").
>> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
>> ---
>>   drivers/pci/controller/dwc/pcie-qcom-ep.c | 73 +++++++++++++++++++++++++++++++
>>   1 file changed, 73 insertions(+)
>>
>> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> index 19b3283..5d146ec 100644
>> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
>> @@ -13,6 +13,7 @@
>>   #include <linux/debugfs.h>
>>   #include <linux/delay.h>
>>   #include <linux/gpio/consumer.h>
>> +#include <linux/interconnect.h>
>>   #include <linux/mfd/syscon.h>
>>   #include <linux/phy/pcie.h>
>>   #include <linux/phy/phy.h>
>> @@ -28,6 +29,7 @@
>>   #define PARF_SYS_CTRL				0x00
>>   #define PARF_DB_CTRL				0x10
>>   #define PARF_PM_CTRL				0x20
>> +#define PARF_PM_STTS				0x24
>>   #define PARF_MHI_CLOCK_RESET_CTRL		0x174
>>   #define PARF_MHI_BASE_ADDR_LOWER		0x178
>>   #define PARF_MHI_BASE_ADDR_UPPER		0x17c
>> @@ -128,11 +130,19 @@
>>   /* DBI register fields */
>>   #define DBI_CON_STATUS_POWER_STATE_MASK		GENMASK(1, 0)
>>   
>> +#define DBI_LINKCTRLSTATUS			0x80
>> +#define DBI_LINKCTRLSTATUS_SHIFT		16
>> +
>>   #define XMLH_LINK_UP				0x400
>>   #define CORE_RESET_TIME_US_MIN			1000
>>   #define CORE_RESET_TIME_US_MAX			1005
>>   #define WAKE_DELAY_US				2000 /* 2 ms */
>>   
>> +#define PCIE_GEN1_BW_MBPS			250
>> +#define PCIE_GEN2_BW_MBPS			500
>> +#define PCIE_GEN3_BW_MBPS			985
>> +#define PCIE_GEN4_BW_MBPS			1969
>> +
>>   #define to_pcie_ep(x)				dev_get_drvdata((x)->dev)
>>   
>>   enum qcom_pcie_ep_link_status {
>> @@ -178,6 +188,8 @@ struct qcom_pcie_ep {
>>   	struct phy *phy;
>>   	struct dentry *debugfs;
>>   
>> +	struct icc_path *icc_mem;
>> +
>>   	struct clk_bulk_data *clks;
>>   	int num_clks;
>>   
>> @@ -253,9 +265,51 @@ static void qcom_pcie_dw_stop_link(struct dw_pcie *pci)
>>   	disable_irq(pcie_ep->perst_irq);
>>   }
>>   
>> +static void qcom_pcie_ep_icc_update(struct qcom_pcie_ep *pcie_ep)
>> +{
>> +	struct dw_pcie *pci = &pcie_ep->pci;
>> +	u32 offset, status, bw;
>> +	int speed, width;
>> +	int ret;
>> +
>> +	if (!pcie_ep->icc_mem)
>> +		return;
>> +
>> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> +	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
>> +
>> +	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
>> +	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
>> +
>> +	switch (speed) {
>> +	case 1:
>> +		bw = MBps_to_icc(PCIE_GEN1_BW_MBPS);
>> +		break;
>> +	case 2:
>> +		bw = MBps_to_icc(PCIE_GEN2_BW_MBPS);
>> +		break;
>> +	case 3:
>> +		bw = MBps_to_icc(PCIE_GEN3_BW_MBPS);
>> +		break;
>> +	default:
>> +		WARN_ON_ONCE(1);
> We can drop WARN_ON_ONCE and print a warning saying that default GEN4 bandwidth
> is being used.
done
>
>> +		fallthrough;
>> +	case 4:
>> +		bw = MBps_to_icc(PCIE_GEN4_BW_MBPS);
>> +		break;
>> +	}
>> +
>> +	ret = icc_set_bw(pcie_ep->icc_mem, 0, width * bw);
>> +	if (ret) {
>> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
>> +			ret);
>> +	}
>> +}
>> +
>>   static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
>>   {
>>   	int ret;
>> +	struct dw_pcie *pci = &pcie_ep->pci;
>>   
>>   	ret = clk_bulk_prepare_enable(pcie_ep->num_clks, pcie_ep->clks);
>>   	if (ret)
>> @@ -277,6 +331,20 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
>>   	if (ret)
>>   		goto err_phy_exit;
>>   
>> +	/*
>> +	 * Some Qualcomm platforms require interconnect bandwidth constraints
>> +	 * to be set before enabling interconnect clocks.
>> +	 *
>> +	 * Set an initial average bandwidth corresponding to GEN1x1
> Keep the comment same as the other driver.
done
>> +	 * for the pcie to mem path.
>> +	 */
>> +	ret = icc_set_bw(pcie_ep->icc_mem, 0, MBps_to_icc(PCIE_GEN1_BW_MBPS));
>> +	if (ret) {
>> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
>> +			ret);
>> +		goto err_phy_exit;
> PHY should be powered off in the case of error.
>
> Rest looks good.
>
> - Mani

For platforms which need ICC it is must to vote for interconnect so 
better to power off in case of error.

-KC

>> +	}
>> +
>>   	return 0;
>>   
>>   err_phy_exit:
>> @@ -550,6 +618,10 @@ static int qcom_pcie_ep_get_resources(struct platform_device *pdev,
>>   	if (IS_ERR(pcie_ep->phy))
>>   		ret = PTR_ERR(pcie_ep->phy);
>>   
>> +	pcie_ep->icc_mem = devm_of_icc_get(dev, "pcie-mem");
>> +	if (IS_ERR(pcie_ep->icc_mem))
>> +		ret = PTR_ERR(pcie_ep->icc_mem);
>> +
>>   	return ret;
>>   }
>>   
>> @@ -572,6 +644,7 @@ static irqreturn_t qcom_pcie_ep_global_irq_thread(int irq, void *data)
>>   	} else if (FIELD_GET(PARF_INT_ALL_BME, status)) {
>>   		dev_dbg(dev, "Received BME event. Link is enabled!\n");
>>   		pcie_ep->link_status = QCOM_PCIE_EP_LINK_ENABLED;
>> +		qcom_pcie_ep_icc_update(pcie_ep);
>>   	} else if (FIELD_GET(PARF_INT_ALL_PM_TURNOFF, status)) {
>>   		dev_dbg(dev, "Received PM Turn-off event! Entering L23\n");
>>   		val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
>> -- 
>> 2.7.4
>>