linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 00/24] PCI: Bridge window selection improvements
Date: Tue, 16 Sep 2025 19:02:19 +0300 (EEST)	[thread overview]
Message-ID: <9a21aa6b-ab8b-7ae5-5dbf-f2b895798e8c@linux.intel.com> (raw)
In-Reply-To: <20250829131113.36754-1-ilpo.jarvinen@linux.intel.com>

[-- Attachment #1: Type: text/plain, Size: 3733 bytes --]

On Fri, 29 Aug 2025, Ilpo Järvinen wrote:

> This series is based on top of the three resource fitting and assignment
> algorithm fixes already in the pci/resource branch. I've tried to compare
> these patch with the commits in the pci/resource branch to retain the minor
> spelling/grammar corrections Bjorn made while applying v1.
> 
> v2 is just to fix two small issues within the series intermediate patches.
> These corrections attempt to ensure this series is bisectable if
> troubleshooting requires that in the future.
> 
> In addition, a few corrections to changelog texts were made.
> 
> I'm left to wonder though if the added double spaces after some stops
> within the commit messages in the pci/resource branch were intentional or
> not (I did remove them for v2).
> 
> As the changes are very minimal, I'm only sending this to lists and Bjorn
> to spare people's inboxes. If somebody provides a Tested-by tag for v1, it
> should be counted in for this v2 (v1 vs v2 difference does not matter if
> testing the entire series).
> 
> v2:
> - In pci_bridge_release_resources():
>     - Keep type assignment in until removing the type hack.
>     - Introduce res_name in the patch it is used avoid compiler warning
>       about unused variable. Place it into the block that needs it.
> - Minor corrections to changelog texts

Hi Bjorn,

Just a reminder that v2 improves bisectability of this series which might 
turn out very useful in case people hit any issues due to one of these 
changes so I'd prefer pci/resource content to be upgrade from v1 to v2.

--
 i.

> Ilpo Järvinen (24):
>   m68k/PCI: Use pci_enable_resources() in pcibios_enable_device()
>   sparc/PCI: Remove pcibios_enable_device() as they do nothing extra
>   MIPS: PCI: Use pci_enable_resources()
>   PCI: Move find_bus_resource_of_type() earlier
>   PCI: Refactor find_bus_resource_of_type() logic checks
>   PCI: Always claim bridge window before its setup
>   PCI: Disable non-claimed bridge window
>   PCI: Use pci_release_resource() instead of release_resource()
>   PCI: Enable bridge even if bridge window fails to assign
>   PCI: Preserve bridge window resource type flags
>   PCI: Add defines for bridge window indexing
>   PCI: Add bridge window selection functions
>   PCI: Fix finding bridge window in pci_reassign_bridge_resources()
>   PCI: Warn if bridge window cannot be released when resizing BAR
>   PCI: Use pbus_select_window() during BAR resize
>   PCI: Use pbus_select_window_for_type() during IO window sizing
>   PCI: Rename resource variable from r to res
>   PCI: Use pbus_select_window() in space available checker
>   PCI: Use pbus_select_window_for_type() during mem window sizing
>   PCI: Refactor distributing available memory to use loops
>   PCI: Refactor remove_dev_resources() to use pbus_select_window()
>   PCI: Add pci_setup_one_bridge_window()
>   PCI: Pass bridge window to pci_bus_release_bridge_resources()
>   PCI: Alter misleading recursion to pci_bus_release_bridge_resources()
> 
>  arch/m68k/kernel/pcibios.c   |  39 +-
>  arch/mips/pci/pci-legacy.c   |  38 +-
>  arch/sparc/kernel/leon_pci.c |  27 --
>  arch/sparc/kernel/pci.c      |  27 --
>  arch/sparc/kernel/pcic.c     |  27 --
>  drivers/pci/bus.c            |   3 +
>  drivers/pci/pci-sysfs.c      |  27 +-
>  drivers/pci/pci.h            |   8 +-
>  drivers/pci/probe.c          |  35 +-
>  drivers/pci/setup-bus.c      | 798 ++++++++++++++++++-----------------
>  drivers/pci/setup-res.c      |  46 +-
>  include/linux/pci.h          |   5 +-
>  12 files changed, 504 insertions(+), 576 deletions(-)
> 
> 
> base-commit: 295524c65d8b4850efbb809f12176eb1262a5aba
> 

  parent reply	other threads:[~2025-09-16 16:02 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-29 13:10 [PATCH v2 00/24] PCI: Bridge window selection improvements Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 01/24] m68k/PCI: Use pci_enable_resources() in pcibios_enable_device() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 02/24] sparc/PCI: Remove pcibios_enable_device() as they do nothing extra Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 03/24] MIPS: PCI: Use pci_enable_resources() Ilpo Järvinen
2025-10-13 19:54   ` Guenter Roeck
2025-10-13 21:02     ` Bjorn Helgaas
2025-10-28 22:45       ` Bjorn Helgaas
2025-10-13 21:17     ` Thomas Bogendoerfer
2025-10-13 23:00       ` Maciej W. Rozycki
2025-10-14 10:54         ` Ilpo Järvinen
2025-10-14 12:22           ` Maciej W. Rozycki
2025-10-14 12:41             ` Ilpo Järvinen
2025-10-14 12:58               ` Maciej W. Rozycki
2025-10-17 10:49               ` Thomas Bogendoerfer
2025-10-17 10:58                 ` Ilpo Järvinen
2025-10-17 12:11                   ` Thomas Bogendoerfer
2025-10-18 21:32             ` Maciej W. Rozycki
2025-08-29 13:10 ` [PATCH v2 04/24] PCI: Move find_bus_resource_of_type() earlier Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 05/24] PCI: Refactor find_bus_resource_of_type() logic checks Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 06/24] PCI: Always claim bridge window before its setup Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 07/24] PCI: Disable non-claimed bridge window Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 08/24] PCI: Use pci_release_resource() instead of release_resource() Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 09/24] PCI: Enable bridge even if bridge window fails to assign Ilpo Järvinen
2025-08-29 13:10 ` [PATCH v2 10/24] PCI: Preserve bridge window resource type flags Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 11/24] PCI: Add defines for bridge window indexing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 12/24] PCI: Add bridge window selection functions Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 13/24] PCI: Fix finding bridge window in pci_reassign_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 14/24] PCI: Warn if bridge window cannot be released when resizing BAR Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 15/24] PCI: Use pbus_select_window() during BAR resize Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 16/24] PCI: Use pbus_select_window_for_type() during IO window sizing Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 17/24] PCI: Rename resource variable from r to res Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 18/24] PCI: Use pbus_select_window() in space available checker Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 19/24] PCI: Use pbus_select_window_for_type() during mem window sizing Ilpo Järvinen
2025-10-18  8:14   ` WARNING at drivers/pci/setup-bus.c:2373, bisected to "PCI: Use pbus_select_window_for_type() during mem window sizing" Klaus Kudielka
2025-10-25 10:11     ` Klaus Kudielka
2025-10-25 12:44       ` Klaus Kudielka
2025-10-27 13:29         ` Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 20/24] PCI: Refactor distributing available memory to use loops Ilpo Järvinen
2025-10-08 14:47   ` john_chen_chn
2025-08-29 13:11 ` [PATCH v2 21/24] PCI: Refactor remove_dev_resources() to use pbus_select_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 22/24] PCI: Add pci_setup_one_bridge_window() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 23/24] PCI: Pass bridge window to pci_bus_release_bridge_resources() Ilpo Järvinen
2025-08-29 13:11 ` [PATCH v2 24/24] PCI: Alter misleading recursion " Ilpo Järvinen
2025-09-16 16:02 ` Ilpo Järvinen [this message]
2025-09-16 16:23 ` [PATCH v2 00/24] PCI: Bridge window selection improvements Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9a21aa6b-ab8b-7ae5-5dbf-f2b895798e8c@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).