linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xinghui Li <korantwork@gmail.com>
To: helgaas@kernel.org, nirmal.patel@linux.intel.com,
	kbusch@kernel.org, jonathan.derrick@linux.dev,
	lpieralisi@kernel.org
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Xinghui Li <korantli@tencent.com>
Subject: Re: [PATCH v4] PCI: vmd: Add the module param to adjust MSI mode
Date: Mon, 27 Mar 2023 14:39:04 +0800	[thread overview]
Message-ID: <CAEm4hYXDwkjt9hYUkerkD6KvtCCdLXtz1D34WFrmjPNsTxLANw@mail.gmail.com> (raw)
In-Reply-To: <20230320132316.3126838-1-korantwork@gmail.com>

Friendly ping~


On Mon, Mar 20, 2023 at 9:23 PM <korantwork@gmail.com> wrote:
>
> From: Xinghui Li <korantli@tencent.com>
>
> In the legacy, the vmd MSI mode can only be adjusted by configuring
> vmd_ids table. This patch adds another way to adjust MSI mode by
> adjusting module param, which allows users easier to adjust the vmd
> according to the I/O scenario without rebuilding driver. There are two
> params that could be recognized: on, off. The default param is NULL,
> the goal is not to effect the existing settings of the device.
>
> Signed-off-by: Xinghui Li <korantli@tencent.com>
> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com>
> ---
>  drivers/pci/controller/vmd.c | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
> index 990630ec57c6..fb61181baa9e 100644
> --- a/drivers/pci/controller/vmd.c
> +++ b/drivers/pci/controller/vmd.c
> @@ -34,6 +34,19 @@
>  #define MB2_SHADOW_OFFSET      0x2000
>  #define MB2_SHADOW_SIZE                16
>
> +/*
> + * The VMD msi_remap module parameter provides the alternative way
> + * to adjust MSI mode when loading vmd.ko other than vmd_ids table.
> + * There are two params could be recognized:
> + *
> + * off: disable MSI remapping
> + * on:  enable MSI remapping
> + *
> + */
> +static char *msi_remap;
> +module_param(msi_remap, charp, 0444);
> +MODULE_PARM_DESC(msi_remap, "Whether to enable MSI remapping function");
> +
>  enum vmd_features {
>         /*
>          * Device may contain registers which hint the physical location of the
> @@ -875,6 +888,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
>                         return ret;
>
>                 vmd_set_msi_remapping(vmd, true);
> +               dev_info(&vmd->dev->dev, "init vmd with remapping MSI\n");
>
>                 ret = vmd_create_irq_domain(vmd);
>                 if (ret)
> @@ -887,6 +901,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
>                 irq_domain_update_bus_token(vmd->irq_domain, DOMAIN_BUS_VMD_MSI);
>         } else {
>                 vmd_set_msi_remapping(vmd, false);
> +               dev_info(&vmd->dev->dev, "init vmd with bypass MSI\n");
>         }
>
>         pci_add_resource(&resources, &vmd->resources[0]);
> @@ -955,6 +970,16 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
>         return 0;
>  }
>
> +static void vmd_config_msi_remap_param(unsigned long *features)
> +{
> +       if (msi_remap) {
> +               if (strcmp(msi_remap, "on") == 0)
> +                       *features &= ~(VMD_FEAT_CAN_BYPASS_MSI_REMAP);
> +               else if (strcmp(msi_remap, "off") == 0)
> +                       *features |= VMD_FEAT_CAN_BYPASS_MSI_REMAP;
> +       }
> +}
> +
>  static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  {
>         unsigned long features = (unsigned long) id->driver_data;
> @@ -984,6 +1009,8 @@ static int vmd_probe(struct pci_dev *dev, const struct pci_device_id *id)
>         if (err < 0)
>                 goto out_release_instance;
>
> +       vmd_config_msi_remap_param(&features);
> +
>         vmd->cfgbar = pcim_iomap(dev, VMD_CFGBAR, 0);
>         if (!vmd->cfgbar) {
>                 err = -ENOMEM;
> --
> 2.31.1
>

  reply	other threads:[~2023-03-27  6:39 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-20 13:23 [PATCH v4] PCI: vmd: Add the module param to adjust MSI mode korantwork
2023-03-27  6:39 ` Xinghui Li [this message]
2023-03-28 21:34 ` Bjorn Helgaas
2023-03-29  8:57   ` Xinghui Li
2023-03-29 16:31     ` Bjorn Helgaas
2023-03-30  6:49       ` Patel, Nirmal
2023-04-02 14:34         ` Xinghui Li
2023-04-03 21:00           ` Patel, Nirmal
2023-04-02 15:02       ` Xinghui Li
2023-04-03 22:45         ` Bjorn Helgaas
2023-04-04 11:02           ` Xinghui Li
2023-04-17  9:15             ` Xinghui Li
2023-04-17 21:44               ` Bjorn Helgaas
2023-04-18  3:40                 ` Xinghui Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAEm4hYXDwkjt9hYUkerkD6KvtCCdLXtz1D34WFrmjPNsTxLANw@mail.gmail.com \
    --to=korantwork@gmail.com \
    --cc=helgaas@kernel.org \
    --cc=jonathan.derrick@linux.dev \
    --cc=kbusch@kernel.org \
    --cc=korantli@tencent.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=nirmal.patel@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).