* Re: [PATCH v1 5/5] driver core: Set fw_devlink=on by default
[not found] <20201218031703.3053753-6-saravanak@google.com>
@ 2021-01-17 23:01 ` Michael Walle
2021-01-18 21:01 ` Saravana Kannan
0 siblings, 1 reply; 3+ messages in thread
From: Michael Walle @ 2021-01-17 23:01 UTC (permalink / raw)
To: saravanak
Cc: Jisheng.Zhang, gregkh, john.stultz, kernel-team, khilman,
linux-kernel, maz, nsaenzjulienne, rafael, minghuan.Lian,
mingkai.hu, roy.zang, linux-pci, Michael Walle
Hi Saravana, again ;)
> Cyclic dependencies in some firmware was one of the last remaining
> reasons fw_devlink=on couldn't be set by default. Now that cyclic
> dependencies don't block probing, set fw_devlink=on by default.
>
> Setting fw_devlink=on by default brings a bunch of benefits (currently,
> only for systems with device tree firmware):
> * Significantly cuts down deferred probes.
> * Device probe is effectively attempted in graph order.
> * Makes it much easier to load drivers as modules without having to
> worry about functional dependencies between modules (depmod is still
> needed for symbol dependencies).
>
> If this patch prevents some devices from probing, it's very likely due
> to the system having one or more device drivers that "probe"/set up a
> device (DT node with compatible property) without creating a struct
> device for it. If we hit such cases, the device drivers need to be
> fixed so that they populate struct devices and probe them like normal
> device drivers so that the driver core is aware of the devices and their
> status. See [1] for an example of such a case.
>
> [1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
> Signed-off-by: Saravana Kannan <saravanak@google.com>
This breaks (at least) probing of the PCIe controllers of my board. The
driver in question is
drivers/pci/controller/dwc/pci-layerscape.c
I've also put the maintainers of this driver on CC. Looks like it uses a
proper struct device. But it uses builtin_platform_driver_probe() and
apparently it waits for the iommu which uses module_platform_driver().
Dunno if that will work together.
The board device tree can be found here:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
Attached is the log with enabled "probe deferral" messages enabled.
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.11.0-rc3-next-20210115-00013-g43ea1c90dcc8-dirty (mwalle@mwalle01) (aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #357 SMP PREEMPT Sun Jan 17 23:46:11 CET 2021
[ 0.000000] Machine model: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000020ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x20ff7d9200-0x20ff7dafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000020ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000002080000000-0x00000020ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000020ffffffff]
[ 0.000000] On node 0 totalpages: 1048576
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 524288 pages, LIFO batch:63
[ 0.000000] Normal zone: 8192 pages used for memmap
[ 0.000000] Normal zone: 524288 pages, LIFO batch:63
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fcc00000
[ 0.000000] percpu: Embedded 31 pages/cpu s89752 r8192 d29032 u126976
[ 0.000000] pcpu-alloc: s89752 r8192 d29032 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: debug root=/dev/mmcblk0p2 rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x00000000f8c00000-0x00000000fcc00000] (64MB)
[ 0.000000] Memory: 3987204K/4194304K available (14592K kernel code, 2024K rwdata, 5776K rodata, 4736K init, 848K bss, 174332K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] ftrace: allocating 51093 entries in 200 pages
[ 0.000000] ftrace: allocated 200 pages with 3 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006040000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080180000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000002080200000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080210000
[ 0.000000] random: get_random_bytes called from start_kernel+0x668/0x830 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000120] Console: colour dummy device 80x25
[ 0.000389] printk: console [tty0] enabled
[ 0.000439] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.000454] pid_max: default: 32768 minimum: 301
[ 0.000500] LSM: Security Framework initializing
[ 0.000553] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000587] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.001510] rcu: Hierarchical SRCU implementation.
[ 0.001667] Platform MSI: gic-its@6020000 domain created
[ 0.001745] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created
[ 0.001980] EFI services will not be available.
[ 0.002073] smp: Bringing up secondary CPUs ...
[ 0.002344] Detected PIPT I-cache on CPU1
[ 0.002365] GICv3: CPU1: found redistributor 1 region 0:0x0000000006060000
[ 0.002375] GICv3: CPU1: using allocated LPI pending table @0x0000002080220000
[ 0.002405] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.002471] smp: Brought up 1 node, 2 CPUs
[ 0.002499] SMP: Total of 2 processors activated.
[ 0.002507] CPU features: detected: 32-bit EL0 Support
[ 0.002515] CPU features: detected: CRC32 instructions
[ 0.002524] CPU features: detected: 32-bit EL1 Support
[ 0.011735] CPU: All CPU(s) started at EL2
[ 0.011761] alternatives: patching kernel code
[ 0.012508] devtmpfs: initialized
[ 0.014832] KASLR disabled due to lack of seed
[ 0.020761] DMA-API: preallocated 65536 debug entries
[ 0.020786] DMA-API: debugging enabled by kernel config
[ 0.020795] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.020815] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.021457] pinctrl core: initialized pinctrl subsystem
[ 0.021715] *************************************************************
[ 0.021722] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.021729] ** **
[ 0.021736] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[ 0.021742] ** **
[ 0.021749] ** This means that this kernel is built to expose internal **
[ 0.021756] ** IOMMU data structures, which may compromise security on **
[ 0.021762] ** your system. **
[ 0.021769] ** **
[ 0.021776] ** If you see this message and you are not debugging the **
[ 0.021782] ** kernel, report this immediately to your vendor! **
[ 0.021789] ** **
[ 0.021795] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.021802] *************************************************************
[ 0.021884] DMI not present or invalid.
[ 0.022167] NET: Registered protocol family 16
[ 0.023001] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.023114] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.023286] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.023317] audit: initializing netlink subsys (disabled)
[ 0.023434] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1
[ 0.023717] thermal_sys: Registered thermal governor 'step_wise'
[ 0.023953] cpuidle: using governor menu
[ 0.024076] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.024112] ASID allocator initialised with 65536 entries
[ 0.024394] Serial: AMBA PL011 UART driver
[ 0.026053] Machine: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier
[ 0.026065] SoC family: QorIQ LS1028A
[ 0.026071] SoC ID: svr:0x870b0110, Revision: 1.0
[ 0.038310] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.038332] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.038342] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.038351] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.039157] cryptd: max_cpu_qlen set to 1000
[ 0.040473] ACPI: Interpreter disabled.
[ 0.040536] platform 22c0000.dma-controller: probe deferral - supplier 5000000.iommu not ready
[ 0.040768] iommu: Default domain type: Translated
[ 0.040845] vgaarb: loaded
[ 0.041009] SCSI subsystem initialized
[ 0.041097] libata version 3.00 loaded.
[ 0.041222] usbcore: registered new interface driver usbfs
[ 0.041248] usbcore: registered new interface driver hub
[ 0.041273] usbcore: registered new device driver usb
[ 0.041554] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported
[ 0.041843] i2c i2c-0: IMX I2C adapter registered
[ 0.042000] imx-i2c 2030000.i2c: can't get pinctrl, bus recovery not supported
[ 0.042104] i2c i2c-1: IMX I2C adapter registered
[ 0.042208] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported
[ 0.042391] i2c i2c-2: IMX I2C adapter registered
[ 0.042516] mc: Linux media interface: v0.10
[ 0.042539] videodev: Linux video capture interface: v2.00
[ 0.042566] pps_core: LinuxPPS API ver. 1 registered
[ 0.042573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.042588] PTP clock support registered
[ 0.042664] EDAC MC: Ver: 3.0.0
[ 0.043046] FPGA manager framework
[ 0.043090] Advanced Linux Sound Architecture Driver Initialized.
[ 0.043543] clocksource: Switched to clocksource arch_sys_counter
[ 0.066221] VFS: Disk quotas dquot_6.6.0
[ 0.066273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.066402] pnp: PnP ACPI: disabled
[ 0.074668] NET: Registered protocol family 2
[ 0.074996] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.075026] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.075122] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.075454] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.075571] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.075604] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.075708] NET: Registered protocol family 1
[ 0.076019] RPC: Registered named UNIX socket transport module.
[ 0.076031] RPC: Registered udp transport module.
[ 0.076038] RPC: Registered tcp transport module.
[ 0.076045] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.076055] PCI: CLS 0 bytes, default 64
[ 0.076425] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.076625] kvm [1]: IPA Size Limit: 44 bits
[ 0.077159] kvm [1]: GICv3: no GICV resource entry
[ 0.077170] kvm [1]: disabling GICv2 emulation
[ 0.077189] kvm [1]: GIC system register CPU interface enabled
[ 0.077228] kvm [1]: vgic interrupt IRQ9
[ 0.077288] kvm [1]: Hyp mode initialized successfully
[ 0.088537] Initialise system trusted keyrings
[ 0.088653] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.092096] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.092507] NFS: Registering the id_resolver key type
[ 0.092532] Key type id_resolver registered
[ 0.092540] Key type id_legacy registered
[ 0.092590] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.092691] 9p: Installing v9fs 9p2000 file system support
[ 0.123462] Key type asymmetric registered
[ 0.123473] Asymmetric key parser 'x509' registered
[ 0.123499] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.123510] io scheduler mq-deadline registered
[ 0.123517] io scheduler kyber registered
[ 0.124604] platform 1f0000000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.124746] platform 3400000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.124761] platform 3500000.pcie: probe deferral - supplier 5000000.iommu not ready
[ 0.125145] EINJ: ACPI disabled.
[ 0.128791] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.129769] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 24, base_baud = 12500000) is a 16550A
[ 1.276625] printk: console [ttyS0] enabled
[ 1.281262] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 24, base_baud = 12500000) is a 16550A
[ 1.290396] platform 2270000.serial: probe deferral - supplier 22c0000.dma-controller not ready
[ 1.299780] arm-smmu 5000000.iommu: probing hardware configuration...
[ 1.306253] arm-smmu 5000000.iommu: SMMUv2 with:
[ 1.310895] arm-smmu 5000000.iommu: stage 1 translation
[ 1.316232] arm-smmu 5000000.iommu: stage 2 translation
[ 1.321566] arm-smmu 5000000.iommu: nested translation
[ 1.326815] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 1.333984] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 1.340542] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 1.347011] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 1.353481] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 1.364504] loop: module loaded
[ 1.367804] at24 0-0050: supply vcc not found, using dummy regulator
[ 1.375049] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 1.381959] at24 1-0057: supply vcc not found, using dummy regulator
[ 1.389165] at24 1-0057: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
[ 1.396063] at24 2-0050: supply vcc not found, using dummy regulator
[ 1.403265] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 1.424830] platform 2120000.spi: probe deferral - supplier 22c0000.dma-controller not ready
[ 1.433801] spi-nor spi0.0: w25q32dw (4096 Kbytes)
[ 1.438888] 8 fixed-partitions partitions found on MTD device 20c0000.spi
[ 1.445729] Creating 8 MTD partitions on "20c0000.spi":
[ 1.450984] 0x000000000000-0x000000010000 : "rcw"
[ 1.459943] 0x000000010000-0x000000100000 : "failsafe bootloader"
[ 1.467909] 0x000000100000-0x000000140000 : "failsafe DP firmware"
[ 1.475904] 0x000000140000-0x0000001e0000 : "failsafe trusted firmware"
[ 1.483901] 0x0000001e0000-0x000000200000 : "reserved"
[ 1.491903] 0x000000200000-0x000000210000 : "configuration store"
[ 1.499897] 0x000000210000-0x0000003e0000 : "bootloader"
[ 1.507909] 0x0000003e0000-0x000000400000 : "bootloader environment"
[ 1.516489] libphy: Fixed MDIO Bus: probed
[ 1.521010] tun: Universal TUN/TAP device driver, 1.6
[ 1.526180] CAN device driver interface
[ 1.530778] thunder_xcv, ver 1.0
[ 1.534051] thunder_bgx, ver 1.0
[ 1.537311] nicpf, ver 1.0
[ 1.540304] hclge is initializing
[ 1.543646] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.550901] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.556270] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.561694] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.567359] sky2: driver version 1.30
[ 1.571307] VFIO - User Level meta-driver version: 0.3
[ 1.576745] dwc3 3100000.usb: Adding to iommu group 0
[ 1.582262] dwc3 3110000.usb: Adding to iommu group 1
[ 1.588251] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.594825] ehci-pci: EHCI PCI platform driver
[ 1.599307] ehci-platform: EHCI generic platform driver
[ 1.604627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.610844] ohci-pci: OHCI PCI platform driver
[ 1.615324] ohci-platform: OHCI generic platform driver
[ 1.620846] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.626370] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 1.634228] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 1.643698] xhci-hcd xhci-hcd.0.auto: irq 29, io mem 0x03100000
[ 1.650061] hub 1-0:1.0: USB hub found
[ 1.653850] hub 1-0:1.0: 1 port detected
[ 1.657959] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.663477] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 1.671174] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.677758] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.686134] hub 2-0:1.0: USB hub found
[ 1.689917] hub 2-0:1.0: 1 port detected
[ 1.694085] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.699607] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 1.707473] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010010
[ 1.716936] xhci-hcd xhci-hcd.1.auto: irq 30, io mem 0x03110000
[ 1.723244] hub 3-0:1.0: USB hub found
[ 1.727026] hub 3-0:1.0: 1 port detected
[ 1.731114] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.736633] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 1.744329] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.750919] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.759300] hub 4-0:1.0: USB hub found
[ 1.763090] hub 4-0:1.0: 1 port detected
[ 1.767271] usbcore: registered new interface driver usb-storage
[ 1.774135] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[ 1.783054] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
[ 1.792577] udc-core: couldn't find an available UDC - added [g_serial] to list of pending drivers
[ 1.801840] input: buttons1 as /devices/platform/buttons1/input/input0
[ 1.809670] ftm-alarm 2800000.timer: registered as rtc1
[ 1.815661] rtc-rv8803 0-0032: Voltage low, temperature compensation stopped.
[ 1.822837] rtc-rv8803 0-0032: Voltage low, data loss detected.
[ 1.829877] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 1.835639] rtc-rv8803 0-0032: registered as rtc0
[ 1.840966] rtc-rv8803 0-0032: Voltage low, data is invalid.
[ 1.846654] rtc-rv8803 0-0032: hctosys: unable to read the hardware clock
[ 1.853617] i2c /dev entries driver
[ 1.868940] sp805-wdt c000000.watchdog: registration successful
[ 1.875000] sp805-wdt c010000.watchdog: registration successful
[ 1.882900] sl28cpld-wdt 2000000.i2c:sl28cpld@4a:watchdog@4: initial timeout 6 sec
[ 1.890998] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver
[ 1.899245] sdhci: Secure Digital Host Controller Interface driver
[ 1.905461] sdhci: Copyright(c) Pierre Ossman
[ 1.909933] Synopsys Designware Multimedia Card Interface Driver
[ 1.916222] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.922189] sdhci-esdhc 2140000.mmc: Adding to iommu group 2
[ 1.927922] sdhci-esdhc 2150000.mmc: Adding to iommu group 3
[ 1.933859] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.940481] usbcore: registered new interface driver usbhid
[ 1.946088] usbhid: USB HID core driver
[ 1.951040] wm8904 2-001a: supply DCVDD not found, using dummy regulator
[ 1.957849] wm8904 2-001a: supply DBVDD not found, using dummy regulator
[ 1.959412] mmc0: SDHCI controller on 2150000.mmc [2150000.mmc] using ADMA
[ 1.964608] wm8904 2-001a: supply AVDD not found, using dummy regulator
[ 1.971498] mmc1: SDHCI controller on 2140000.mmc [2140000.mmc] using ADMA
[ 1.978161] wm8904 2-001a: supply CPVDD not found, using dummy regulator
[ 1.991795] wm8904 2-001a: supply MICVDD not found, using dummy regulator
[ 2.000066] wm8904 2-001a: revision A
[ 2.011006] platform f140000.audio-controller: probe deferral - supplier 22c0000.dma-controller not ready
[ 2.020630] platform f150000.audio-controller: probe deferral - supplier 22c0000.dma-controller not ready
[ 2.030314] drop_monitor: Initializing network drop monitor service
[ 2.036934] NET: Registered protocol family 10
[ 2.041875] Segment Routing with IPv6
[ 2.045615] NET: Registered protocol family 17
[ 2.050199] can: controller area network core
[ 2.054614] NET: Registered protocol family 29
[ 2.059081] can: raw protocol
[ 2.062060] can: broadcast manager protocol
[ 2.066276] can: netlink gateway - max_hops=1
[ 2.070785] 9pnet: Installing 9P2000 support
[ 2.071171] random: fast init done
[ 2.075110] Key type dns_resolver registered
[ 2.078504] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 2.082977] registered taskstats version 1
[ 2.093467] Loading compiled-in X.509 certificates
[ 2.096902] mmc0: new HS400 MMC card at address 0001
[ 2.100484] fsl-edma 22c0000.dma-controller: Adding to iommu group 4
[ 2.103805] mmcblk0: mmc0:0001 S0J58X 29.6 GiB
[ 2.110777] pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges:
[ 2.114498] mmcblk0boot0: mmc0:0001 S0J58X partition 1 31.5 MiB
[ 2.122014] pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
[ 2.128314] mmcblk0boot1: mmc0:0001 S0J58X partition 2 31.5 MiB
[ 2.136776] pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
[ 2.147614] mmcblk0rpmb: mmc0:0001 S0J58X partition 3 4.00 MiB, chardev (241:0)
[ 2.151551] pci-host-generic 1f0000000.pcie: MEM 0x01f81d0000..0x01f81effff -> 0x0000000000
[ 2.163146] mmcblk0: p1 p2
[ 2.167727] pci-host-generic 1f0000000.pcie: MEM 0x01f81f0000..0x01f820ffff -> 0x0000000000
[ 2.179375] pci-host-generic 1f0000000.pcie: MEM 0x01f8210000..0x01f822ffff -> 0x0000000000
[ 2.179619] mmc1: new ultra high speed SDR104 SDHC card at address 5048
[ 2.188227] pci-host-generic 1f0000000.pcie: MEM 0x01f8230000..0x01f824ffff -> 0x0000000000
[ 2.203691] pci-host-generic 1f0000000.pcie: MEM 0x01fc000000..0x01fc3fffff -> 0x0000000000
[ 2.203959] mmcblk1: mmc1:5048 SD16G 14.4 GiB
[ 2.212582] pci-host-generic 1f0000000.pcie: ECAM at [mem 0x1f0000000-0x1f00fffff] for [bus 00]
[ 2.225049] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 2.225832] pci-host-generic 1f0000000.pcie: PCI host bridge to bus 0000:00
[ 2.233193] GPT:266272 != 30253055
[ 2.240157] pci_bus 0000:00: root bus resource [bus 00]
[ 2.240164] pci_bus 0000:00: root bus resource [mem 0x1f8000000-0x1f815ffff] (bus address [0x00000000-0x0015ffff])
[ 2.243589] GPT:Alternate GPT header not at the end of the disk.
[ 2.248824] pci_bus 0000:00: root bus resource [mem 0x1f8160000-0x1f81cffff pref] (bus address [0x00000000-0x0006ffff])
[ 2.259211] GPT:266272 != 30253055
[ 2.265242] pci_bus 0000:00: root bus resource [mem 0x1f81d0000-0x1f81effff] (bus address [0x00000000-0x0001ffff])
[ 2.276103] GPT: Use GNU Parted to correct GPT errors.
[ 2.279483] pci_bus 0000:00: root bus resource [mem 0x1f81f0000-0x1f820ffff pref] (bus address [0x00000000-0x0001ffff])
[ 2.279489] pci_bus 0000:00: root bus resource [mem 0x1f8210000-0x1f822ffff] (bus address [0x00000000-0x0001ffff])
[ 2.279494] pci_bus 0000:00: root bus resource [mem 0x1f8230000-0x1f824ffff pref] (bus address [0x00000000-0x0001ffff])
[ 2.279499] pci_bus 0000:00: root bus resource [mem 0x1fc000000-0x1fc3fffff] (bus address [0x00000000-0x003fffff])
[ 2.279521] pci 0000:00:00.0: [1957:e100] type 00 class 0x020001
[ 2.289971] mmcblk1: p1
[ 2.295081] pci 0000:00:00.0: BAR 0: [mem 0x1f8000000-0x1f803ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.356551] pci 0000:00:00.0: BAR 2: [mem 0x1f8160000-0x1f816ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.359017] hub 3-1:1.0: USB hub found
[ 2.367482] pci 0000:00:00.0: VF BAR 0: [mem 0x1f81d0000-0x1f81dffff 64bit] (from Enhanced Allocation, properties 0x4)
[ 2.371308] hub 3-1:1.0: 7 ports detected
[ 2.381993] pci 0000:00:00.0: VF BAR 2: [mem 0x1f81f0000-0x1f81fffff 64bit pref] (from Enhanced Allocation, properties 0x3)
[ 2.397218] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 2.402737] pci 0000:00:00.0: VF(n) BAR0 space: [mem 0x1f81d0000-0x1f81effff 64bit] (contains BAR0 for 2 VFs)
[ 2.412699] pci 0000:00:00.0: VF(n) BAR2 space: [mem 0x1f81f0000-0x1f820ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 2.423260] pci 0000:00:00.1: [1957:e100] type 00 class 0x020001
[ 2.429323] pci 0000:00:00.1: BAR 0: [mem 0x1f8040000-0x1f807ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.439810] pci 0000:00:00.1: BAR 2: [mem 0x1f8170000-0x1f817ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.450731] pci 0000:00:00.1: VF BAR 0: [mem 0x1f8210000-0x1f821ffff 64bit] (from Enhanced Allocation, properties 0x4)
[ 2.461478] pci 0000:00:00.1: VF BAR 2: [mem 0x1f8230000-0x1f823ffff 64bit pref] (from Enhanced Allocation, properties 0x3)
[ 2.472674] pci 0000:00:00.1: PME# supported from D0 D3hot
[ 2.478193] pci 0000:00:00.1: VF(n) BAR0 space: [mem 0x1f8210000-0x1f822ffff 64bit] (contains BAR0 for 2 VFs)
[ 2.488163] pci 0000:00:00.1: VF(n) BAR2 space: [mem 0x1f8230000-0x1f824ffff 64bit pref] (contains BAR2 for 2 VFs)
[ 2.498689] pci 0000:00:00.2: [1957:e100] type 00 class 0x020001
[ 2.504747] pci 0000:00:00.2: BAR 0: [mem 0x1f8080000-0x1f80bffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.515234] pci 0000:00:00.2: BAR 2: [mem 0x1f8180000-0x1f818ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.526167] pci 0000:00:00.2: PME# supported from D0 D3hot
[ 2.531802] pci 0000:00:00.3: [1957:ee01] type 00 class 0x088001
[ 2.537868] pci 0000:00:00.3: BAR 0: [mem 0x1f8100000-0x1f811ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.548357] pci 0000:00:00.3: BAR 2: [mem 0x1f8190000-0x1f819ffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.559290] pci 0000:00:00.3: PME# supported from D0 D3hot
[ 2.564915] pci 0000:00:00.4: [1957:ee02] type 00 class 0x088001
[ 2.570972] pci 0000:00:00.4: BAR 0: [mem 0x1f8120000-0x1f813ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.581457] pci 0000:00:00.4: BAR 2: [mem 0x1f81a0000-0x1f81affff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.592395] pci 0000:00:00.4: PME# supported from D0 D3hot
[ 2.598030] pci 0000:00:00.5: [1957:eef0] type 00 class 0x020801
[ 2.604092] pci 0000:00:00.5: BAR 0: [mem 0x1f8140000-0x1f815ffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.614583] pci 0000:00:00.5: BAR 2: [mem 0x1f81b0000-0x1f81bffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.625505] pci 0000:00:00.5: BAR 4: [mem 0x1fc000000-0x1fc3fffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.636003] pci 0000:00:00.5: PME# supported from D0 D3hot
[ 2.641641] pci 0000:00:00.6: [1957:e100] type 00 class 0x020001
[ 2.647697] pci 0000:00:00.6: BAR 0: [mem 0x1f80c0000-0x1f80fffff 64bit] (from Enhanced Allocation, properties 0x0)
[ 2.658184] pci 0000:00:00.6: BAR 2: [mem 0x1f81c0000-0x1f81cffff 64bit pref] (from Enhanced Allocation, properties 0x1)
[ 2.669118] pci 0000:00:00.6: PME# supported from D0 D3hot
[ 2.675519] pci 0000:00:1f.0: [1957:e001] type 00 class 0x080700
[ 2.681596] OF: /soc/pcie@1f0000000: no msi-map translation for id 0xf8 on (null)
[ 2.689371] fsl_enetc 0000:00:00.0: Adding to iommu group 5
[ 2.707554] usb 3-1.6: new full-speed USB device number 3 using xhci-hcd
[ 2.799556] fsl_enetc 0000:00:00.0: enabling device (0400 -> 0402)
[ 2.805802] fsl_enetc 0000:00:00.0: no MAC address specified for SI1, using 82:f0:96:19:76:9c
[ 2.814373] fsl_enetc 0000:00:00.0: no MAC address specified for SI2, using 5e:fb:ae:4d:83:1f
[ 2.823365] libphy: Freescale ENETC MDIO Bus: probed
[ 2.829583] libphy: Freescale ENETC internal MDIO Bus: probed
[ 2.836011] fsl_enetc 0000:00:00.1: Adding to iommu group 6
[ 2.841724] fsl_enetc 0000:00:00.1: device is disabled, skipping
[ 2.847885] fsl_enetc 0000:00:00.2: Adding to iommu group 7
[ 2.853568] fsl_enetc 0000:00:00.2: device is disabled, skipping
[ 2.859709] fsl_enetc_mdio 0000:00:00.3: Adding to iommu group 8
[ 2.872274] hid-generic 0003:064F:2AF9.0001: device has no listeners, quitting
[ 2.971555] fsl_enetc_mdio 0000:00:00.3: enabling device (0400 -> 0402)
[ 2.978403] libphy: FSL PCIe IE Central MDIO Bus: probed
[ 2.983940] mscc_felix 0000:00:00.5: Adding to iommu group 9
[ 2.989781] mscc_felix 0000:00:00.5: device is disabled, skipping
[ 2.996017] fsl_enetc 0000:00:00.6: Adding to iommu group 10
[ 3.001802] fsl_enetc 0000:00:00.6: device is disabled, skipping
[ 3.007871] OF: /soc/pcie@1f0000000: no iommu-map translation for id 0xf8 on (null)
[ 3.015686] pcieport 0000:00:1f.0: PME: Signaling with IRQ 123
[ 3.021749] pcieport 0000:00:1f.0: AER: enabled with IRQ 123
[ 3.028170] 2270000.serial: ttyLP2 at MMIO 0x2270000 (irq = 25, base_baud = 12500000) is a FSL_LPUART
[ 3.038551] spi-nor spi1.0: at25sl321 (4096 Kbytes)
[ 3.047761] asoc-simple-card sound: ASoC: no DMI vendor name!
[ 3.056720] input: buttons0 as /devices/platform/buttons0/input/input1
[ 3.063570] ALSA device list:
[ 3.066547] #0: f150000.audio-controller-wm8904-hifi
[ 3.075682] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 3.083049] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 3.095936] EXT4-fs (mmcblk0p2): recovery complete
[ 3.102318] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 3.103561] usb 3-1.3: new high-speed USB device number 4 using xhci-hcd
[ 3.112153] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 3.125913] devtmpfs: mounted
[ 3.133476] Freeing unused kernel memory: 4736K
[ 3.147609] Missing param value! Expected 'debug=...value...'
[ 3.153388] Missing param value! Expected 'rootwait=...value...'
[ 3.159421] Run /sbin/init as init process
[ 3.163540] with arguments:
[ 3.166513] /sbin/init
[ 3.169228] with environment:
[ 3.172378] HOME=/
[ 3.174741] TERM=linux
[ 3.205526] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none.
[ 3.223479] usb-storage 3-1.3:1.0: USB Mass Storage device detected
[ 3.230192] scsi host0: usb-storage 3-1.3:1.0
[ 3.277936] udevd[139]: starting version 3.2.8
[ 3.283246] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.290280] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.296805] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.304858] udevd[139]: specified group 'kvm' unknown
[ 3.317735] udevd[140]: starting eudev-3.2.8
[ 4.634039] scsi 0:0:0:0: Direct-Access JetFlash Transcend 32GB 1100 PQ: 0 ANSI: 6
[ 4.646337] sd 0:0:0:0: [sda] 61702144 512-byte logical blocks: (31.6 GB/29.4 GiB)
[ 4.657126] sd 0:0:0:0: [sda] Write Protect is off
[ 4.662029] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 4.673461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.710188] sda: sda1
[ 4.715321] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 4.753103] fsl_enetc 0000:00:00.0 gbe0: renamed from eth0
[ 6.006576] urandom_read: 3 callbacks suppressed
[ 6.006587] random: dd: uninitialized urandom read (512 bytes read)
[ 6.108830] fsl_enetc 0000:00:00.0 gbe0: PHY [0000:00:00.0:05] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[ 6.127032] fsl_enetc 0000:00:00.0 gbe0: configuring for inband/sgmii link mode
[ 6.153943] random: dropbear: uninitialized urandom read (32 bytes read)
[ 10.212329] fsl_enetc 0000:00:00.0 gbe0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 10.220233] IPv6: ADDRCONF(NETDEV_CHANGE): gbe0: link becomes ready
[ 164.963579] random: crng init done
HTH,
-michael
^ permalink raw reply [flat|nested] 3+ messages in thread