From: Giridhar Malavali <giridhar.malavali@qlogic.com>
To: Yijing Wang <wangyijing@huawei.com>, Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>,
Dept-Eng Linux Driver <Linux-Driver@qlogic.com>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
PCI <linux-pci@vger.kernel.org>,
Saurav Kashyap <saurav.kashyap@qlogic.com>,
Chad Dupuis <chad.dupuis@qlogic.com>
Subject: Re: Fail to probe qla2xxx fiber channel card while doing pci hotplug
Date: Mon, 17 Sep 2012 11:15:43 -0700 [thread overview]
Message-ID: <CC7CB653.20008%giridhar.malavali@qlogic.com> (raw)
In-Reply-To: <50571243.4050001@huawei.com>
On 9/17/12 5:06 AM, "Yijing Wang" <wangyijing@huawei.com> wrote:
>[ 769.531289] qla2xxx [0000:08:00.0]-001d: : Found an ISP2532 irq 32
>iobase 0xffffc90016bcc000.
>[ 769.531748] qla2xxx 0000:08:00.0: irq 91 for MSI/MSI-X
>[ 769.531768] qla2xxx 0000:08:00.0: irq 92 for MSI/MSI-X
>[ 799.503673] qla2xxx [0000:08:00.0]-d008:10: No buffer available for
>dump.
>[ 799.503682] qla2xxx [0000:08:00.0]-101c:10: Mailbox cmd timeout
>occurred, cmd=0xb, mb[0]=0xb, eeh_busy=0x0. Scheduling ISP abort.
>[ 799.503689] qla2xxx [0000:08:00.0]-0098:10: Failed to load segment 0
>of firmware.
>[ 829.853242] qla2xxx [0000:08:00.0]-d008:10: No buffer available for
>dump.
>[ 829.853249] qla2xxx [0000:08:00.0]-008f:10: Failed to load segment 0
>of firmware.
>[ 829.853253] qla2xxx [0000:08:00.0]-00cf:10: Setup chip ****FAILED****.
>[ 829.853258] qla2xxx [0000:08:00.0]-00d6:10: Failed to initialize
>adapter - Adapter flags 2.
>[ 829.853893] qla2xxx 0000:08:00.1: enabling device (0104 -> 0106)
>[ 829.855251] qla2xxx [0000:08:00.1]-001d: : Found an ISP2532 irq 42
>iobase 0xffffc90016b88000.
>[ 829.855828] qla2xxx 0000:08:00.1: irq 91 for MSI/MSI-X
>[ 829.855849] qla2xxx 0000:08:00.1: irq 92 for MSI/MSI-X
>[ 859.827388] qla2xxx [0000:08:00.1]-d008:11: No buffer available for
>dump.
>[ 859.827395] qla2xxx [0000:08:00.1]-101c:11: Mailbox cmd timeout
>occurred, cmd=0xb, mb[0]=0xb, eeh_busy=0x0. Scheduling ISP abort.
>[ 859.827400] qla2xxx [0000:08:00.1]-0098:11: Failed to load segment 0
>of firmware.
>[ 890.176829] qla2xxx [0000:08:00.1]-d008:11: No buffer available for
>dump.
>[ 890.176837] qla2xxx [0000:08:00.1]-008f:11: Failed to load segment 0
>of firmware.
>[ 890.176841] qla2xxx [0000:08:00.1]-00cf:11: Setup chip ****FAILED****.
>[ 890.176845] qla2xxx [0000:08:00.1]-00d6:11: Failed to initialize
>adapter - Adapter flags 2.
I see that the one of the initial mailbox which loads data from system
memory to RISC RAM failing causing the probe to fail.
-- Giri
next prev parent reply other threads:[~2012-09-17 18:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-15 10:22 Fail to probe qla2xxx fiber channel card while doing pci hotplug Yijing Wang
2012-09-16 3:30 ` Bjorn Helgaas
[not found] ` <50571243.4050001@huawei.com>
2012-09-17 18:15 ` Giridhar Malavali [this message]
2012-09-18 1:26 ` Yijing Wang
2012-09-18 17:54 ` Bjorn Helgaas
2012-09-18 23:49 ` Giridhar Malavali
2012-09-20 1:27 ` Yijing Wang
2012-09-19 1:50 ` Yijing Wang
2012-09-19 13:39 ` Bjorn Helgaas
2012-09-19 15:31 ` Jiang Liu
2012-09-20 1:39 ` Yijing Wang
2012-09-20 1:47 ` Yijing Wang
2012-09-20 12:26 ` Yijing Wang
2012-09-20 15:46 ` Bjorn Helgaas
2012-09-20 15:58 ` Jiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CC7CB653.20008%giridhar.malavali@qlogic.com \
--to=giridhar.malavali@qlogic.com \
--cc=Linux-Driver@qlogic.com \
--cc=andrew.vasquez@qlogic.com \
--cc=bhelgaas@google.com \
--cc=chad.dupuis@qlogic.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=saurav.kashyap@qlogic.com \
--cc=wangyijing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).