Re: [PATCH] PCI/portdrv: Skip enabling AER on external facing ports

[Mika Westerberg <mika.westerberg@linux.intel.com>]

Hi Kai-Heng,

On Fri, Jan 07, 2022 at 12:09:57PM +0800, Kai-Heng Feng wrote:
> Only from root ports of thunderbolt devices.
> 
> The error occurs as soon as the root port is runtime suspended to D3cold.
> 
> Runtime suspend the AER service can resolve the issue. I wonder if
> it's the right thing to do here?

I think you are right here. It seems that AER "service driver" is
completely missing PM hooks. Probably because it is more used in server
type of systems where power management is not priority.

> D3cold should also mean the PCI link is gone, disabling AER seems to
> be a reasonable approach.

Indeed - I think AER might trigger here because the link does "down" /
low power state if left enabled while the root port enters D3. Something
like below hack should disable it over low power transitions:

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 9fa1f97e5b27..64138cf82db8 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1432,6 +1432,22 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
 
+static int aer_suspend(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	aer_disable_rootport(rpc);
+	return 0;
+}
+
+static int aer_resume(struct pcie_device *dev)
+{
+	struct aer_rpc *rpc = get_service_data(dev);
+
+	aer_enable_rootport(rpc);
+	return 0;
+}
+
 static struct pcie_port_service_driver aerdriver = {
 	.name		= "aer",
 	.port_type	= PCIE_ANY_PORT,
@@ -1439,6 +1455,10 @@ static struct pcie_port_service_driver aerdriver = {
 
 	.probe		= aer_probe,
 	.remove		= aer_remove,
+	.suspend	= aer_suspend,
+	.resume		= aer_resume,
+	.runtime_suspend = aer_suspend,
+	.runtime_resume	= aer_resume,
 };
 
 /**