linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
	Stephen Boyd <swboyd@chromium.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Taniya Das <tdas@codeaurora.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Krzysztof Wilczy??ski <kw@linux.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Prasad Malisetty <quic_pmaliset@quicinc.com>,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: Re: [PATCH v1 1/5] clk: qcom: regmap-mux: add pipe clk implementation
Date: Tue, 12 Apr 2022 13:32:22 -0500	[thread overview]
Message-ID: <YlXFtt/+YwpMQ0va@builder.lan> (raw)
In-Reply-To: <20220323085010.1753493-2-dmitry.baryshkov@linaro.org>

On Wed 23 Mar 03:50 CDT 2022, Dmitry Baryshkov wrote:

> On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
> muxes which must be parked to the "safe" source (bi_tcxo) when
> corresponding GDSC is turned off and on again. Currently this is
> handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
> clock. However the same code sequence should be applied in the
> pcie-qcom endpoint, USB3 and UFS drivers.
> 
> Rather than copying this sequence over and over again, follow the
> example of clk_rcg2_shared_ops and implement this parking in the
> enable() and disable() clock operations. As we are changing the parent
> behind the back of the clock framework, also implement custom
> set_parent() and get_parent() operations behaving accroding to the clock
> framework expectations (cache the new parent if the clock is in disabled
> state, return cached parent).
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/clk/qcom/clk-regmap-mux.c | 78 +++++++++++++++++++++++++++++++
>  drivers/clk/qcom/clk-regmap-mux.h |  3 ++
>  2 files changed, 81 insertions(+)
> 
> diff --git a/drivers/clk/qcom/clk-regmap-mux.c b/drivers/clk/qcom/clk-regmap-mux.c
> index 45d9cca28064..c39ee783ee83 100644
> --- a/drivers/clk/qcom/clk-regmap-mux.c
> +++ b/drivers/clk/qcom/clk-regmap-mux.c
> @@ -49,9 +49,87 @@ static int mux_set_parent(struct clk_hw *hw, u8 index)
>  	return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
>  }
>  
> +static u8 mux_safe_get_parent(struct clk_hw *hw)
> +{
> +	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
> +	unsigned int val;
> +
> +	if (clk_hw_is_enabled(hw))
> +		return mux_get_parent(hw);
> +
> +	val = mux->stored_parent_cfg;
> +
> +	if (mux->parent_map)
> +		return qcom_find_cfg_index(hw, mux->parent_map, val);
> +
> +	return val;
> +}
> +
> +static int mux_safe_set_parent(struct clk_hw *hw, u8 index)
> +{
> +	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
> +
> +	if (clk_hw_is_enabled(hw))
> +		return mux_set_parent(hw, index);
> +
> +	if (mux->parent_map)
> +		index = mux->parent_map[index].cfg;
> +
> +	mux->stored_parent_cfg = index;
> +
> +	return 0;
> +}
> +
> +static void mux_safe_disable(struct clk_hw *hw)
> +{
> +	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
> +	struct clk_regmap *clkr = to_clk_regmap(hw);
> +	unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
> +	unsigned int val;
> +
> +	regmap_read(clkr->regmap, mux->reg, &val);
> +
> +	mux->stored_parent_cfg = (val & mask) >> mux->shift;
> +
> +	val = mux->safe_src_parent;
> +	if (mux->parent_map) {
> +		int index = qcom_find_src_index(hw, mux->parent_map, val);
> +
> +		if (WARN_ON(index < 0))
> +			return;
> +
> +		val = mux->parent_map[index].cfg;
> +	}
> +	val <<= mux->shift;
> +
> +	regmap_update_bits(clkr->regmap, mux->reg, mask, val);
> +}
> +
> +static int mux_safe_enable(struct clk_hw *hw)
> +{
> +	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
> +	struct clk_regmap *clkr = to_clk_regmap(hw);
> +	unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
> +	unsigned int val;
> +
> +	val = mux->stored_parent_cfg;
> +	val <<= mux->shift;
> +
> +	return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
> +}
> +
>  const struct clk_ops clk_regmap_mux_closest_ops = {
>  	.get_parent = mux_get_parent,
>  	.set_parent = mux_set_parent,
>  	.determine_rate = __clk_mux_determine_rate_closest,
>  };
>  EXPORT_SYMBOL_GPL(clk_regmap_mux_closest_ops);
> +
> +const struct clk_ops clk_regmap_mux_safe_ops = {
> +	.enable = mux_safe_enable,
> +	.disable = mux_safe_disable,
> +	.get_parent = mux_safe_get_parent,
> +	.set_parent = mux_safe_set_parent,
> +	.determine_rate = __clk_mux_determine_rate_closest,
> +};
> +EXPORT_SYMBOL_GPL(clk_regmap_mux_safe_ops);
> diff --git a/drivers/clk/qcom/clk-regmap-mux.h b/drivers/clk/qcom/clk-regmap-mux.h
> index db6f4cdd9586..f86c674ce139 100644
> --- a/drivers/clk/qcom/clk-regmap-mux.h
> +++ b/drivers/clk/qcom/clk-regmap-mux.h
> @@ -14,10 +14,13 @@ struct clk_regmap_mux {
>  	u32			reg;
>  	u32			shift;
>  	u32			width;
> +	u8			safe_src_parent;
> +	u8			stored_parent_cfg;
>  	const struct parent_map	*parent_map;
>  	struct clk_regmap	clkr;
>  };
>  
>  extern const struct clk_ops clk_regmap_mux_closest_ops;
> +extern const struct clk_ops clk_regmap_mux_safe_ops;
>  
>  #endif
> -- 
> 2.35.1
> 

  parent reply	other threads:[~2022-04-12 18:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-23  8:50 [PATCH v1 0/5] PCI: qcom: rework pipe_clk/pipe_clk_src handling Dmitry Baryshkov
2022-03-23  8:50 ` [PATCH v1 1/5] clk: qcom: regmap-mux: add pipe clk implementation Dmitry Baryshkov
2022-04-08 11:15   ` Lorenzo Pieralisi
2022-04-12 18:45     ` Bjorn Andersson
2022-04-13  8:16       ` Johan Hovold
2022-04-13  9:56       ` Lorenzo Pieralisi
2022-04-12 18:32   ` Bjorn Andersson [this message]
2022-03-23  8:50 ` [PATCH v1 2/5] clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks Dmitry Baryshkov
2022-03-23  8:50 ` [PATCH v1 3/5] clk: qcom: gcc-sc7280: " Dmitry Baryshkov
2022-03-23  8:50 ` [PATCH v1 4/5] PCI: qcom: Remove unnecessary pipe_clk handling Dmitry Baryshkov
2022-04-01 10:17   ` Johan Hovold
2022-03-23  8:50 ` [PATCH v1 5/5] PCI: qcom: Drop manual pipe_clk_src handling Dmitry Baryshkov
2022-03-30 12:56 ` [PATCH v1 0/5] PCI: qcom: rework pipe_clk/pipe_clk_src handling Dmitry Baryshkov
2022-04-04  5:03   ` Prasad Malisetty (Temp) (QUIC)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YlXFtt/+YwpMQ0va@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=quic_pmaliset@quicinc.com \
    --cc=swboyd@chromium.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).