linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Cc: helgaas@kernel.org, linux-pci@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	quic_vbadigan@quicinc.com, quic_hemantk@quicinc.com,
	quic_nitegupt@quicinc.com, quic_skananth@quicinc.com,
	quic_ramkri@quicinc.com, manivannan.sadhasivam@linaro.org,
	swboyd@chromium.org, dmitry.baryshkov@linaro.org,
	"Stanimir Varbanov" <svarbanov@mm-sol.com>,
	"Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Subject: Re: [PATCH v4 1/2] PCI: qcom: Add system PM support
Date: Mon, 11 Jul 2022 14:53:31 -0700	[thread overview]
Message-ID: <Ysyb24TidwWFH0Dm@google.com> (raw)
In-Reply-To: <1657118425-10304-2-git-send-email-quic_krichai@quicinc.com>

On Wed, Jul 06, 2022 at 08:10:24PM +0530, Krishna chaitanya chundru wrote:
> Add suspend and resume pm callbacks.
> 
> When system suspends, and if the link is in L1ss, disable the clocks
> and power down the phy so that system enters into low power state to
> save the maximum power. And when the system resumes, enable the clocks
> back and power on phy if they are disabled in the suspend path.
> 
> we are doing this only when link is in l1ss but not in L2/L3 as
> no where we are forcing link to L2/L3 by sending PME turn off.
> 
> is_suspended flag indicates if the clocks are disabled in the suspend
> path or not. And this flag is being used to restrict the access to
> config space, dbi etc when clock are turned-off.
> 
> Changes since v3:
> 	- Powering down the phy in suspend and powering it on resume to
> 	  acheive maximum power savings.
> Changes since v2:
> 	- Replaced the enable, disable clks ops with suspend and resume
> 	- Renamed support_pm_opsi flag  with supports_system_suspend.
> Changes since v1:
> 	- Fixed compilation errors.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 85 ++++++++++++++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 6ab9089..0a9d1ee 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -41,6 +41,9 @@
>  #define L23_CLK_RMV_DIS				BIT(2)
>  #define L1_CLK_RMV_DIS				BIT(1)
>  
> +#define PCIE20_PARF_PM_STTS                     0x24
> +#define PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB    BIT(8)
> +
>  #define PCIE20_PARF_PHY_CTRL			0x40
>  #define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK	GENMASK(20, 16)
>  #define PHY_CTRL_PHY_TX0_TERM_OFFSET(x)		((x) << 16)
> @@ -190,6 +193,8 @@ struct qcom_pcie_ops {
>  	void (*post_deinit)(struct qcom_pcie *pcie);
>  	void (*ltssm_enable)(struct qcom_pcie *pcie);
>  	int (*config_sid)(struct qcom_pcie *pcie);
> +	int (*suspend)(struct qcom_pcie *pcie);
> +	int (*resume)(struct qcom_pcie *pcie);
>  };
>  
>  struct qcom_pcie_cfg {
> @@ -199,6 +204,7 @@ struct qcom_pcie_cfg {
>  	unsigned int has_ddrss_sf_tbu_clk:1;
>  	unsigned int has_aggre0_clk:1;
>  	unsigned int has_aggre1_clk:1;
> +	unsigned int supports_system_suspend:1;
>  };
>  
>  struct qcom_pcie {
> @@ -209,6 +215,7 @@ struct qcom_pcie {
>  	struct phy *phy;
>  	struct gpio_desc *reset;
>  	const struct qcom_pcie_cfg *cfg;
> +	unsigned int is_suspended:1;
>  };
>  
>  #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
> @@ -1308,6 +1315,33 @@ static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
>  	clk_disable_unprepare(res->pipe_clk);
>  }
>  
> +static int qcom_pcie_resume_2_7_0(struct qcom_pcie *pcie)
> +{
> +	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +	int ret;
> +
> +	clk_prepare_enable(res->pipe_clk);
> +
> +	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
> +
> +	phy_power_on(pcie->phy);
> +
> +	return ret;
> +}
> +
> +static int qcom_pcie_suspend_2_7_0(struct qcom_pcie *pcie)
> +{
> +	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> +
> +	phy_power_off(pcie->phy);
> +
> +	clk_bulk_disable_unprepare(res->num_clks, res->clks);
> +
> +	clk_disable_unprepare(res->pipe_clk);
> +
> +	return 0;
> +}
> +
>  static int qcom_pcie_link_up(struct dw_pcie *pci)
>  {
>  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> @@ -1496,6 +1530,8 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
>  	.post_init = qcom_pcie_post_init_2_7_0,
>  	.post_deinit = qcom_pcie_post_deinit_2_7_0,
>  	.config_sid = qcom_pcie_config_sid_sm8250,
> +	.suspend = qcom_pcie_suspend_2_7_0,
> +	.resume = qcom_pcie_resume_2_7_0,
>  };
>  
>  static const struct qcom_pcie_cfg apq8084_cfg = {
> @@ -1548,6 +1584,7 @@ static const struct qcom_pcie_cfg sc7280_cfg = {
>  	.ops = &ops_1_9_0,
>  	.has_tbu_clk = true,
>  	.pipe_clk_need_muxing = true,
> +	.supports_system_suspend = true,
>  };
>  
>  static const struct dw_pcie_ops dw_pcie_ops = {
> @@ -1591,6 +1628,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->cfg = pcie_cfg;
>  
> +	pcie->is_suspended = false;
> +
>  	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
>  	if (IS_ERR(pcie->reset)) {
>  		ret = PTR_ERR(pcie->reset);
> @@ -1645,6 +1684,51 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> +static int __maybe_unused qcom_pcie_pm_suspend(struct device *dev)
> +{
> +	struct qcom_pcie *pcie = dev_get_drvdata(dev);
> +	u32 val;
> +
> +	if (!pcie->cfg->supports_system_suspend)
> +		return 0;
> +
> +	/* if the link is not in l1ss don't turn off clocks */
> +	val = readl(pcie->parf + PCIE20_PARF_PM_STTS);
> +	if (!(val & PCIE20_PARF_PM_STTS_LINKST_IN_L1SUB)) {
> +		dev_warn(dev, "Link is not in L1ss\n");
> +		return 0;
> +	}
> +
> +	if (pcie->cfg->ops->suspend)
> +		pcie->cfg->ops->suspend(pcie);
> +
> +	pcie->is_suspended = true;
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused qcom_pcie_pm_resume(struct device *dev)
> +{
> +	struct qcom_pcie *pcie = dev_get_drvdata(dev);
> +
> +	if (!pcie->cfg->supports_system_suspend)
> +		return 0;

The above check can be omitted, it is implied by the next one.
'is_suspended' can only be true when system suspend is supported.

> +
> +	if (!pcie->is_suspended)
> +		return 0;
> +
> +	if (pcie->cfg->ops->resume)
> +		pcie->cfg->ops->resume(pcie);
> +
> +	pcie->is_suspended = false;
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops qcom_pcie_pm_ops = {
> +	NOIRQ_SYSTEM_SLEEP_PM_OPS(qcom_pcie_pm_suspend, qcom_pcie_pm_resume)
> +};
> +
>  static const struct of_device_id qcom_pcie_match[] = {
>  	{ .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg },
>  	{ .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg },
> @@ -1679,6 +1763,7 @@ static struct platform_driver qcom_pcie_driver = {
>  	.probe = qcom_pcie_probe,
>  	.driver = {
>  		.name = "qcom-pcie",
> +		.pm = pm_sleep_ptr(&qcom_pcie_pm_ops),
>  		.suppress_bind_attrs = true,
>  		.of_match_table = qcom_pcie_match,
>  	},
> -- 
> 2.7.4
> 

  reply	other threads:[~2022-07-11 21:53 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-24  7:28 [PATCH v1 0/2] PCI: Restrict pci transactions after pci suspend Krishna chaitanya chundru
2022-06-24  7:28 ` [PATCH v1 1/2] PCI: qcom: Add system PM support Krishna chaitanya chundru
2022-06-24 18:31   ` Matthias Kaehlcke
2022-06-24  7:28 ` [PATCH v1 2/2] PCI: qcom: Restrict pci transactions after pci suspend Krishna chaitanya chundru
2022-06-29  9:33 ` [PATCH v2 0/2] PCI: " Krishna chaitanya chundru
2022-06-29  9:33   ` [PATCH v2 1/2] PCI: qcom: Add system PM support Krishna chaitanya chundru
2022-06-29 19:33     ` Matthias Kaehlcke
2022-06-30  4:34     ` Manivannan Sadhasivam
2022-06-30  9:59       ` Krishna Chaitanya Chundru
2022-07-04  4:44         ` Manivannan Sadhasivam
2022-07-04  4:48           ` Manivannan Sadhasivam
2022-06-29  9:33   ` [PATCH v2 2/2] PCI: qcom: Restrict pci transactions after pci suspend Krishna chaitanya chundru
2022-07-04  4:54     ` Manivannan Sadhasivam
2022-07-01 14:13   ` [PATCH v3 0/2] PCI: " Krishna chaitanya chundru
2022-07-01 14:13     ` [PATCH v3 1/2] PCI: qcom: Add system PM support Krishna chaitanya chundru
2022-07-01 14:13     ` [PATCH v3 2/2] PCI: qcom: Restrict pci transactions after pci suspend Krishna chaitanya chundru
2022-07-06 14:40     ` [PATCH v4 0/2] PCI: " Krishna chaitanya chundru
2022-07-06 14:40       ` [PATCH v4 1/2] PCI: qcom: Add system PM support Krishna chaitanya chundru
2022-07-11 21:53         ` Matthias Kaehlcke [this message]
2022-07-14 10:41           ` Krishna Chaitanya Chundru
2022-07-15 13:43         ` Johan Hovold
2022-07-06 14:40       ` [PATCH v4 2/2] PCI: qcom: Restrict pci transactions after pci suspend Krishna chaitanya chundru
2022-07-12  0:34         ` Matthias Kaehlcke
2022-07-15 13:51         ` Johan Hovold
2022-07-06 15:13       ` [PATCH v4 0/2] PCI: " Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Ysyb24TidwWFH0Dm@google.com \
    --to=mka@chromium.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=helgaas@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=quic_hemantk@quicinc.com \
    --cc=quic_krichai@quicinc.com \
    --cc=quic_nitegupt@quicinc.com \
    --cc=quic_ramkri@quicinc.com \
    --cc=quic_skananth@quicinc.com \
    --cc=quic_vbadigan@quicinc.com \
    --cc=robh@kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).