linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Cai Huoqing <cai.huoqing@linux.dev>
To: vkoul@kernel.org
Cc: "Gustavo Pimentel" <gustavo.pimentel@synopsys.com>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Jingoo Han" <jingoohan1@gmail.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org,
	linux-pci@vger.kernel.org
Subject: Re: [PATCH RESEND v9 0/4] dmaengine: dw-edma: Add support for native HDMA
Date: Mon, 8 May 2023 19:27:03 +0800	[thread overview]
Message-ID: <ZFjch8wPNgpbNo1E@chq-MS-7D45> (raw)
In-Reply-To: <20230413033156.93751-1-cai.huoqing@linux.dev>

On 13 4月 23 11:31:51, Cai Huoqing wrote:
> Add support for HDMA NATIVE, as long the IP design has set
> the compatible register map parameter-HDMA_NATIVE,
> which allows compatibility for native HDMA register configuration.
> 
> The HDMA Hyper-DMA IP is an enhancement of the eDMA embedded-DMA IP.
> And the native HDMA registers are different from eDMA,
> so this patch add support for HDMA NATIVE mode.
> 
> HDMA write and read channels operate independently to maximize
> the performance of the HDMA read and write data transfer over
> the link When you configure the HDMA with multiple read channels,
> then it uses a round robin (RR) arbitration scheme to select
> the next read channel to be serviced.The same applies when
> youhave multiple write channels.
> 
> The native HDMA driver also supports a maximum of 16 independent
> channels (8 write + 8 read), which can run simultaneously.
> Both SAR (Source Address Register) and DAR (Destination Address Register)
> are aligned to byte.
> 
> Cai Huoqing (1):
>   dmaengine: dw-edma: Add support for native HDMA
> 
> Cai huoqing (3):
>   dmaengine: dw-edma: Rename dw_edma_core_ops structure to
>     dw_edma_plat_ops
>   dmaengine: dw-edma: Create a new dw_edma_core_ops structure to
>     abstract controller operation
>   dmaengine: dw-edma: Add HDMA DebugFS support
> 
> Tested-by: Serge Semin <fancer.lancer@gmail.com>
Hi Vinod

Just ping this patch.

I have rebased this patch series, pls try it.

Thanks,
-Cai
> 
> v8->v9:
>   [3/4]
>   1.Drop an empty line.
>   [4/4]
>   2.Update commit log.
>   3.Remove unused macro
> 
> v8 link:
>   https://lore.kernel.org/lkml/20230323034944.78357-1-cai.huoqing@linux.dev/
> 
>  drivers/dma/dw-edma/Makefile                 |   8 +-
>  drivers/dma/dw-edma/dw-edma-core.c           |  86 ++----
>  drivers/dma/dw-edma/dw-edma-core.h           |  58 ++++
>  drivers/dma/dw-edma/dw-edma-pcie.c           |   4 +-
>  drivers/dma/dw-edma/dw-edma-v0-core.c        |  85 +++++-
>  drivers/dma/dw-edma/dw-edma-v0-core.h        |  14 +-
>  drivers/dma/dw-edma/dw-hdma-v0-core.c        | 296 +++++++++++++++++++
>  drivers/dma/dw-edma/dw-hdma-v0-core.h        |  17 ++
>  drivers/dma/dw-edma/dw-hdma-v0-debugfs.c     | 170 +++++++++++
>  drivers/dma/dw-edma/dw-hdma-v0-debugfs.h     |  22 ++
>  drivers/dma/dw-edma/dw-hdma-v0-regs.h        | 129 ++++++++
>  drivers/pci/controller/dwc/pcie-designware.c |   2 +-
>  include/linux/dma/edma.h                     |   7 +-
>  13 files changed, 807 insertions(+), 91 deletions(-)
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.c
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-core.h
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.c
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-debugfs.h
>  create mode 100644 drivers/dma/dw-edma/dw-hdma-v0-regs.h
> 
> -- 
> 2.34.1
> 

      parent reply	other threads:[~2023-05-08 11:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-13  3:31 [PATCH RESEND v9 0/4] dmaengine: dw-edma: Add support for native HDMA Cai Huoqing
2023-04-13  3:31 ` [PATCH RESEND v9 1/4] dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops Cai Huoqing
2023-04-13 18:22   ` Manivannan Sadhasivam
2023-04-13  3:31 ` [PATCH RESEND v9 2/4] dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation Cai Huoqing
2023-04-13 18:34   ` Manivannan Sadhasivam
2023-04-13  3:31 ` [PATCH RESEND v9 3/4] dmaengine: dw-edma: Add support for native HDMA Cai Huoqing
2023-04-13 18:41   ` Manivannan Sadhasivam
2023-04-13  3:31 ` [PATCH RESEND v9 4/4] dmaengine: dw-edma: Add HDMA DebugFS support Cai Huoqing
2023-04-13 18:45   ` Manivannan Sadhasivam
2023-04-13  4:53 ` [PATCH RESEND v9 0/4] dmaengine: dw-edma: Add support for native HDMA Cai Huoqing
2023-04-14  0:41 ` Serge Semin
2023-05-08 11:27 ` Cai Huoqing [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZFjch8wPNgpbNo1E@chq-MS-7D45 \
    --to=cai.huoqing@linux.dev \
    --cc=bhelgaas@google.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).