From: Bjorn Helgaas <helgaas@kernel.org>
To: Terry Bowman <terry.bowman@amd.com>
Cc: alison.schofield@intel.com, vishal.l.verma@intel.com,
ira.weiny@intel.com, bwidawsk@kernel.org,
dan.j.williams@intel.com, dave.jiang@intel.com,
Jonathan.Cameron@huawei.com, linux-cxl@vger.kernel.org,
rrichter@amd.com, linux-kernel@vger.kernel.org,
bhelgaas@google.com, Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
Oliver O'Halloran <oohall@gmail.com>,
linux-pci@vger.kernel.org
Subject: Re: [PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module
Date: Wed, 24 May 2023 11:55:18 -0500 [thread overview]
Message-ID: <ZG5BdvAP1OuQVTWz@bhelgaas> (raw)
In-Reply-To: <20230523232214.55282-19-terry.bowman@amd.com>
On Tue, May 23, 2023 at 06:22:09PM -0500, Terry Bowman wrote:
> The CXL driver plans to use cper_print_aer() for logging restricted CXL
> host (RCH) AER errors. cper_print_aer() is not currently exported and
> therefore not usable by the CXL driver built as a loadable module. Export
> the cper_print_aer() function making it available.
>
> The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
> cper_print_aer(). cper_print_aer() logs the AER registers and is
> useful in PCIE AER logging outside of APEI. Remove the
> CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
>
> The cper_print_aer() function name implies CPER specific use but is useful
> in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
>
> Co-developed-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Robert Richter <rrichter@amd.com>
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
> Cc: "Oliver O'Halloran" <oohall@gmail.com>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: linux-pci@vger.kernel.org
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
> drivers/pci/pcie/aer.c | 9 +++++----
> include/linux/aer.h | 2 +-
> 2 files changed, 6 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index f6c24ded134c..d3344fcf1f79 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -771,9 +771,10 @@ int cper_severity_to_aer(int cper_severity)
> }
> }
> EXPORT_SYMBOL_GPL(cper_severity_to_aer);
> +#endif
>
> -void cper_print_aer(struct pci_dev *dev, int aer_severity,
> - struct aer_capability_regs *aer)
> +void pci_print_aer(struct pci_dev *dev, int aer_severity,
> + struct aer_capability_regs *aer)
> {
> int layer, agent, tlp_header_valid = 0;
> u32 status, mask;
> @@ -812,7 +813,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
> trace_aer_event(dev_name(&dev->dev), (status & ~mask),
> aer_severity, tlp_header_valid, &aer->header_log);
> }
> -#endif
> +EXPORT_SYMBOL_NS_GPL(pci_print_aer, CXL);
>
> /**
> * add_error_device - list device to be handled
> @@ -1009,7 +1010,7 @@ static void aer_recover_work_func(struct work_struct *work)
> PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn));
> continue;
> }
> - cper_print_aer(pdev, entry.severity, entry.regs);
> + pci_print_aer(pdev, entry.severity, entry.regs);
> if (entry.severity == AER_NONFATAL)
> pcie_do_recovery(pdev, pci_channel_io_normal,
> aer_root_reset);
> diff --git a/include/linux/aer.h b/include/linux/aer.h
> index 97f64ba1b34a..8f124b904314 100644
> --- a/include/linux/aer.h
> +++ b/include/linux/aer.h
> @@ -64,7 +64,7 @@ static inline void pci_save_aer_state(struct pci_dev *dev) {}
> static inline void pci_restore_aer_state(struct pci_dev *dev) {}
> #endif
>
> -void cper_print_aer(struct pci_dev *dev, int aer_severity,
> +void pci_print_aer(struct pci_dev *dev, int aer_severity,
> struct aer_capability_regs *aer);
> int cper_severity_to_aer(int cper_severity);
> void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-05-24 16:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20230523232214.55282-1-terry.bowman@amd.com>
2023-05-23 23:22 ` [PATCH v4 18/23] PCI/AER: Refactor cper_print_aer() for use by CXL driver module Terry Bowman
2023-05-24 16:55 ` Bjorn Helgaas [this message]
2023-05-25 21:38 ` Terry Bowman
2023-05-23 23:22 ` [PATCH v4 22/23] PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler Terry Bowman
2023-05-24 21:32 ` Bjorn Helgaas
2023-05-25 21:29 ` Robert Richter
2023-05-25 22:01 ` Bjorn Helgaas
2023-05-25 22:28 ` Robert Richter
2023-06-01 14:06 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZG5BdvAP1OuQVTWz@bhelgaas \
--to=helgaas@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=bhelgaas@google.com \
--cc=bwidawsk@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mahesh@linux.ibm.com \
--cc=oohall@gmail.com \
--cc=rrichter@amd.com \
--cc=terry.bowman@amd.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox