[PATCH v3 0/2] KingFisher: support regulators for PCIe

[PATCH v3 0/2] KingFisher: support regulators for PCIe

[Wolfram Sang]

Here are the patches to make PCIe cards work in the slot CN15 on a
KingFisher board. Look at the patches for a changelog, please.


Wolfram Sang (2):
  dt-bindings: PCI: rcar-pci-host: add optional regulators
  PCI: rcar-host: add support for optional regulators

 .../devicetree/bindings/pci/rcar-pci-host.yaml   | 11 +++++++++++
 drivers/pci/controller/pcie-rcar-host.c          | 16 +++++++++++++++-
 2 files changed, 26 insertions(+), 1 deletion(-)

-- 
2.30.2

[PATCH v3 1/2] dt-bindings: PCI: rcar-pci-host: add optional regulators

[Wolfram Sang]

Support regulators found on the e.g. KingFisher board for miniPCIe and
add a 12v regulator while we are here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes since v2:

* none

 .../devicetree/bindings/pci/rcar-pci-host.yaml        | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
index 8fdfbc763d70..b6a7cb32f61e 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -68,6 +68,15 @@ properties:
   phy-names:
     const: pcie
 
+  vpcie1v5-supply:
+    description: The 1.5v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
 required:
   - compatible
   - reg
@@ -121,5 +130,7 @@ examples:
              clock-names = "pcie", "pcie_bus";
              power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
              resets = <&cpg 319>;
+             vpcie3v3-supply = <&pcie_3v3>;
+             vpcie12v-supply = <&pcie_12v>;
          };
     };
-- 
2.30.2

[PATCH v3 2/2] PCI: rcar-host: add support for optional regulators

[Wolfram Sang]

The KingFisher board has regulators. They just need to be en-/disabled,
so we can leave the handling to devm. Order variables in reverse-xmas
while we are here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
Changes since v2:

* return directly with dev_err_probe
* reworded the error message to avoid repeating 'error'

 drivers/pci/controller/pcie-rcar-host.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c
index e80e56b2a842..f4b31d206634 100644
--- a/drivers/pci/controller/pcie-rcar-host.c
+++ b/drivers/pci/controller/pcie-rcar-host.c
@@ -29,6 +29,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
 
 #include "pcie-rcar.h"
 
@@ -974,14 +975,20 @@ static const struct of_device_id rcar_pcie_of_match[] = {
 	{},
 };
 
+/* Design note 346 from Linear Technology says order is not important */
+static const char * const rcar_pcie_supplies[] = {
+	"vpcie12v", "vpcie3v3", "vpcie1v5"
+};
+
 static int rcar_pcie_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct pci_host_bridge *bridge;
 	struct rcar_pcie_host *host;
 	struct rcar_pcie *pcie;
+	unsigned int i;
 	u32 data;
 	int err;
-	struct pci_host_bridge *bridge;
 
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*host));
 	if (!bridge)
@@ -992,6 +999,13 @@ static int rcar_pcie_probe(struct platform_device *pdev)
 	pcie->dev = dev;
 	platform_set_drvdata(pdev, host);
 
+	for (i = 0; i < ARRAY_SIZE(rcar_pcie_supplies); i++) {
+		err = devm_regulator_get_enable_optional(dev, rcar_pcie_supplies[i]);
+		if (err < 0 && err != -ENODEV)
+			return dev_err_probe(dev, err, "can't enable regulator %s\n",
+					     rcar_pcie_supplies[i]);
+	}
+
 	pm_runtime_enable(pcie->dev);
 	err = pm_runtime_get_sync(pcie->dev);
 	if (err < 0) {
-- 
2.30.2

Re: [PATCH v3 2/2] PCI: rcar-host: add support for optional regulators

[Geert Uytterhoeven]

On Fri, May 12, 2023 at 9:55 AM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:
> The KingFisher board has regulators. They just need to be en-/disabled,
> so we can leave the handling to devm. Order variables in reverse-xmas
> while we are here.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> Changes since v2:
>
> * return directly with dev_err_probe
> * reworded the error message to avoid repeating 'error'

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH v3 0/2] KingFisher: support regulators for PCIe

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 466 bytes --]

Hiya,

On Fri, May 12, 2023 at 09:52:39AM +0200, Wolfram Sang wrote:
> Here are the patches to make PCIe cards work in the slot CN15 on a
> KingFisher board. Look at the patches for a changelog, please.
> 
> 
> Wolfram Sang (2):
>   dt-bindings: PCI: rcar-pci-host: add optional regulators
>   PCI: rcar-host: add support for optional regulators

Is it possible to have this in 6.5? I don't see it in -next as of today.

Happy hacking,

   Wolfram


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]