Re: [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes

[Andrea della Porta <andrea.porta@suse.com>]

Hi Manivannan,

On 22:39 Sat 02 Nov     , Manivannan Sadhasivam wrote:
> On Mon, Oct 28, 2024 at 03:07:22PM +0100, Andrea della Porta wrote:
> > When populating "ranges" property for a PCI bridge, of_pci_prop_ranges()
> > incorrectly use the CPU bus address of the resource. Since this is a PCI-PCI
> > bridge, the window should instead be in PCI address space. Call
> > pci_bus_address() on the resource in order to obtain the PCI bus
> > address.
> > 
> 
> of_pci_prop_ranges() could be called for PCI devices also (not just PCI
> bridges), right?

Correct. Please note however that while the PCI-PCI bridge has the parent
address in CPU space, an endpoint device has it in PCI space: here we're
focusing on the bridge part. It probably used to work before since in many
cases the CPU and PCI address are the same, but it breaks down when they
differ.

Many thanks,
Andrea

> 
> - Mani
> 
> > Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
> > ---
> >  drivers/pci/of_property.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/of_property.c b/drivers/pci/of_property.c
> > index 5a0b98e69795..886c236e5de6 100644
> > --- a/drivers/pci/of_property.c
> > +++ b/drivers/pci/of_property.c
> > @@ -126,7 +126,7 @@ static int of_pci_prop_ranges(struct pci_dev *pdev, struct of_changeset *ocs,
> >  		if (of_pci_get_addr_flags(&res[j], &flags))
> >  			continue;
> >  
> > -		val64 = res[j].start;
> > +		val64 = pci_bus_address(pdev, &res[j] - pdev->resource);
> >  		of_pci_set_address(pdev, rp[i].parent_addr, val64, 0, flags,
> >  				   false);
> >  		if (pci_is_bridge(pdev)) {
> > -- 
> > 2.35.3
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்