linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrea della Porta <andrea.porta@suse.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Andrea della Porta <andrea.porta@suse.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Florian Fainelli <florian.fainelli@broadcom.com>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	Lorenzo Pieralisi <lpieralisi@kernel.org>,
	Krzysztof Wilczynski <kw@linux.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Derek Kiernan <derek.kiernan@amd.com>,
	Dragan Cvetic <dragan.cvetic@amd.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Saravana Kannan <saravanak@google.com>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-gpio@vger.kernel.org,
	Masahiro Yamada <masahiroy@kernel.org>,
	Stefan Wahren <wahrenst@gmx.net>,
	Herve Codina <herve.codina@bootlin.com>,
	Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Andrew Lunn <andrew@lunn.ch>
Subject: Re: [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
Date: Thu, 7 Nov 2024 08:17:58 +0100	[thread overview]
Message-ID: <ZyxppoSeZhOQ8h2L@apocalypse> (raw)
In-Reply-To: <20241106145022.t7w2762t7zxpefc3@thinkpad>

Hi Manivannan,

On 14:50 Wed 06 Nov     , Manivannan Sadhasivam wrote:
> On Mon, Oct 28, 2024 at 03:07:21PM +0100, Andrea della Porta wrote:
> > The RP1 is a MFD that exposes its peripherals through PCI BARs. This
> > schema is intended as minimal support for the clock generator and
> > gpio controller peripherals which are accessible through BAR1.
> > 
> > Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
> > ---
> >  .../devicetree/bindings/misc/pci1de4,1.yaml   | 80 +++++++++++++++++++
> >  MAINTAINERS                                   |  1 +
> >  2 files changed, 81 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> > new file mode 100644
> > index 000000000000..d66b2fc130d1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> > @@ -0,0 +1,80 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: RaspberryPi RP1 MFD PCI device
> > +
> > +maintainers:
> > +  - Andrea della Porta <andrea.porta@suse.com>
> > +
> > +description:
> > +  The RaspberryPi RP1 is a PCI multi function device containing
> > +  peripherals ranging from Ethernet to USB controller, I2C, SPI
> > +  and others.
> > +  The peripherals are accessed by addressing the PCI BAR1 region.
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-ep-bus.yaml
> > +
> > +properties:
> > +  compatible:
> > +    additionalItems: true
> > +    maxItems: 3
> > +    items:
> > +      - const: pci1de4,1
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> > +    description:
> > +      Specifies respectively the interrupt number and flags as defined
> > +      in include/dt-bindings/interrupt-controller/irq.h.
> > +
> > +  interrupt-controller: true
> > +
> > +unevaluatedProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - '#interrupt-cells'
> > +  - interrupt-controller
> > +  - pci-ep-bus@1
> > +
> > +examples:
> > +  - |
> > +    pci {
> > +        #address-cells = <3>;
> > +        #size-cells = <2>;
> > +
> > +        rp1@0,0 {
> > +            compatible = "pci1de4,1";
> > +            ranges = <0x01 0x00 0x00000000
> > +                      0x82010000 0x00 0x00
> > +                      0x00 0x400000>;
> 
> Could you please have the 'ranges' in a single line as used everywhere?
> 
> - Mani

Sure.

Many thanks,
Andrea

> 
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            interrupt-controller;
> > +            #interrupt-cells = <2>;
> > +
> > +            pci_ep_bus: pci-ep-bus@1 {
> > +                compatible = "simple-bus";
> > +                ranges = <0xc0 0x40000000
> > +                          0x01 0x00 0x00000000
> > +                          0x00 0x00400000>;
> > +                dma-ranges = <0x10 0x00000000
> > +                              0x43000000 0x10 0x00000000
> > +                              0x10 0x00000000>;
> > +                #address-cells = <2>;
> > +                #size-cells = <2>;
> > +
> > +                rp1_clocks: clocks@c040018000 {
> > +                    compatible = "raspberrypi,rp1-clocks";
> > +                    reg = <0xc0 0x40018000 0x0 0x10038>;
> > +                    #clock-cells = <1>;
> > +                    clocks = <&clk_rp1_xosc>;
> > +                    clock-names =  "xosc";
> > +                };
> > +            };
> > +        };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index ccf123b805c8..2aea5a6166bd 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -19384,6 +19384,7 @@ RASPBERRY PI RP1 PCI DRIVER
> >  M:	Andrea della Porta <andrea.porta@suse.com>
> >  S:	Maintained
> >  F:	Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml
> > +F:	Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> >  F:	Documentation/devicetree/bindings/pci/pci-ep-bus.yaml
> >  F:	Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> >  F:	include/dt-bindings/clock/rp1.h
> > -- 
> > 2.35.3
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2024-11-07  7:17 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-28 14:07 [PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings Andrea della Porta
2024-10-28 14:21   ` Krzysztof Kozlowski
2024-10-29  7:23   ` Krzysztof Kozlowski
2024-10-31  9:16     ` Andrea della Porta
2024-11-15 11:31       ` Andrea della Porta
2024-11-15 23:00         ` Stephen Boyd
2024-10-28 14:07 ` [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Andrea della Porta
2024-10-29  7:26   ` Krzysztof Kozlowski
2024-10-31 14:07     ` Andrea della Porta
2024-10-31 18:10       ` Krzysztof Kozlowski
2024-11-04 11:11         ` Andrea della Porta
2024-11-07 11:57           ` Krzysztof Kozlowski
2024-10-28 14:07 ` [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs Andrea della Porta
2024-10-29  7:28   ` Krzysztof Kozlowski
2024-10-31 14:20     ` Andrea della Porta
2024-10-31 18:06       ` Krzysztof Kozlowski
2024-11-04 11:18         ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1 Andrea della Porta
2024-11-06 14:50   ` Manivannan Sadhasivam
2024-11-07  7:17     ` Andrea della Porta [this message]
2024-10-28 14:07 ` [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes Andrea della Porta
2024-10-28 16:57   ` Bjorn Helgaas
2024-11-02 17:09   ` Manivannan Sadhasivam
2024-11-04  8:54     ` Andrea della Porta
2024-11-04 15:05       ` Manivannan Sadhasivam
2024-11-04 23:49         ` Bjorn Helgaas
2024-11-06 14:35           ` Manivannan Sadhasivam
2024-11-07  9:06             ` Andrea della Porta
2024-11-07 10:48               ` Manivannan Sadhasivam
2024-11-07 11:51             ` Stanimir Varbanov
2024-11-04  8:06   ` Herve Codina
2024-11-04  8:38     ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping Andrea della Porta
2024-11-04  8:08   ` Herve Codina
2024-10-28 14:07 ` [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1 Andrea della Porta
2024-10-28 22:20   ` Stephen Boyd
2024-11-05  8:30     ` Andrea della Porta
2024-10-31 12:07   ` kernel test robot
2024-10-31 14:12   ` kernel test robot
2024-11-01  4:14   ` kernel test robot
2024-10-28 14:07 ` [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Andrea della Porta
2024-10-28 22:16   ` Linus Walleij
2024-10-28 22:18   ` Linus Walleij
2024-10-31 14:44     ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device Andrea della Porta
2024-11-04 13:29   ` Stanimir Varbanov
2024-11-05 14:31     ` Andrea della Porta
2024-11-06 12:28       ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver Andrea della Porta
2024-11-04 13:43   ` Stanimir Varbanov
2024-11-05 15:53     ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5 Andrea della Porta
2024-10-28 20:49   ` Stephen Boyd
2024-10-31 14:46     ` Andrea della Porta
2024-10-28 14:07 ` [PATCH v3 12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers Andrea della Porta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZyxppoSeZhOQ8h2L@apocalypse \
    --to=andrea.porta@suse.com \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=brgl@bgdev.pl \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=derek.kiernan@amd.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dragan.cvetic@amd.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=herve.codina@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=masahiroy@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=saravanak@google.com \
    --cc=sboyd@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=wahrenst@gmx.net \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).