From: Mario Limonciello <superm1@kernel.org>
To: "Adrià Vilanova Martínez" <me@avm99963.com>
Cc: bhelgaas@google.com, regressions@lists.linux.dev,
linux-pci@vger.kernel.org
Subject: Re: [REGRESSION] Intel Wireless adapter is not detected until suspending to RAM and resuming
Date: Sun, 19 Oct 2025 19:25:08 -0500 [thread overview]
Message-ID: <a08c71e2-18ca-491b-8982-47214a35445b@kernel.org> (raw)
In-Reply-To: <kaieqe37mjmizjv4regyw67z7hwa3ac3k2mwcjsgq2mj7redpm@xsfb4mtyjblf>
On 10/19/25 6:08 PM, Adrià Vilanova Martínez wrote:
> On Sun, Oct 19, 2025 at 01:22:46PM -0500, Mario Limonciello wrote:
>>
>>
>> On 10/19/25 6:37 AM, Adrià Vilanova Martínez wrote:
>>> On Sun, Oct 19, 2025 at 11:35:38AM +0200, Adrià Vilanova Martínez wrote:
>>>> On Sun, Oct 19, 2025 at 12:12:50AM -0500, Mario Limonciello wrote:
>>>>>
>>>>> On 10/18/25 5:01 PM, Adrià Vilanova Martínez wrote:
>>>>>> Hi,
>>>>>>
>>>>>> My Pixelbook Eve laptop (model C0A) no longer detects the Intel(R) Dual
>>>>>> Band Wireless-AC 7265 adapter on boot after upgrading the Kernel.
>>>>>> However, if I suspend to RAM (e.g., closing the laptop lid) and resume
>>>>>> it, I can use WiFi again and the detection is shown in dmesg.
>>>>>>
>>>>>> After performing a bisection, this is the first commit where the issue
>>>>>> occurs:
>>>>>>
>>>>>> 4d4c10f763 PCI: Explicitly put devices into D0 when initializing
>>>>>
>>>>> 4d4c10f763 has a known failure that was fixed in
>>>>> 907a7a2e5bf40c6a359b2f6cc53d6fdca04009e0.
>>>>>
>>>>> So I'm suspecting a secondary problem has occurred.
>>>>>
>>>>> Can you repeat your bisection and any time that 4d4c10f763 is present but
>>>>> 907a7a2e5bf40c6a359b2f6cc53d6fdca04009e0 isn't, apply it manually?
>>>>
>>>> I was going to repeat the bisection, but before that I checked whether
>>>> applying 907a7a2e5b on top of 4d4c10f763 would build a kernel without
>>>> this issue, and unfortunately it is still broken. So I guess this lets
>>>> us know that 907a7a2e5b does not fix this specific issue.
>>>>
>>>> Would it still help if I repeated the bisection? I would expect it to
>>>> find that 4d4c10f763 with 907a7a2e5b applied on top is still the culprit
>>>> (if there wasn't a second bug introduced between both commits, like you
>>>> mentioned, which is still possible).
>>>>
>>>>>>
>>>>>> Here's the output of dmesg for the latest mainline Kernel I built, where
>>>>>> I can still reproduce the issue (notice that around second 49 I suspend
>>>>>> the laptop; also, I've censored some MACs in the log with
>>>>>> "__CENSORED__"):
>>>>>
>>>>> One other observation is that iwlwifi didn't even try to probe before
>>>>> suspend. That's a bit odd. Was it loaded on it's own? Or was it just
>>>>> failing to probe?
>>>>
>>>> I don't have any experience with the Kernel other than using it and
>>>> knowing the very very basics, but I can tell you that on a buggy kernel:
>>>>
>>>> - After booting, running `lsmod` doesn't show iwlwifi.
>>>> - If I then run `modprobe iwlwifi`, WiFi is still not working even if
>>>> wilwifi starts to appear in `lsmod`.
>>>> - If I then suspend and resume the laptop, WiFi works again.
>>>>
>>>> Also, I'll note that I'm compiling iwlwifi as a module
>>>> (`CONFIG_IWLWIFI=m`), like the Arch Linux Kernel builds I regularly use.
>>>>
>>>> If there is anything I can do to help you troubleshoot this observation,
>>>> please let me know. I would investigate by myself, but my Kernel
>>>> knowledge is limited as I said before.
>>>>
>>>> Thanks again! :)
>>>
>>> Also, another observation: reverting both 907a7a2e5b and 4d4c10f763 in a
>>> recent mainline (1c64efcb08), the issue is gone. I had to resolve
>>> conflicts though, but it was straightforward.
>>>
>>
>> OK, that's good to know it's tied specifically to those commits. But I
>> still don't understand why a suspend/resume helps but it doesn't work at
>> bootup. Maybe Bjorn has some ideas. To me this feels like a BIOS bug.
>
> Since you mention the BIOS, I just searched and found a similar report
> in my BIOS's issue tracker:
> https://github.com/MrChromebox/firmware/issues/786. I'm going to
> cross-post there, since maybe MrChromebox can also contribute here with
> their knowledge.
>
> As suggested by the reporter there, I checked that booting a "busted"
> Kernel with `pcie_aspm=off` makes the WiFi work without having to
> suspend.
>
> Also, here's another report (just to cross-reference):
> https://forum.chrultrabook.com/t/no-wifi-on-pixelbook-2017-after-installation-of-ubuntu-25-10/7727
>
Thanks, knowing that pcie_aspm=off helps I think we should compare
output for:
# sudo lspci -vvnn
In the following cases (all without pcie_aspm=off):
1) At bootup; a kernel without 4d4c10f763 and 907a7a2e5b
2) At bootup; a kernel with 4d4c10f763 and 907a7a2e5b
3) After suspend/resume; a kernel without 4d4c10f763 and 907a7a2e5b4
4) After suspend/resume; a kernel with 4d4c10f763 and 907a7a2e5b
>>
>> 1) Are you on the latest BIOS?
>>
>
> No. I just updated to the latest version (BIOS MrChromebox-2509.1
> 10/13/2025) but I still experience this.
>
>> 2) On a "busted" kernel, does running `lspci` help get things working?
>
> No, and it doesn't list the network card either :/
>
> pixelbook% lspci
> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 615 (rev 02)
> 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
> 00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
> 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
> 00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
> 00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
> 00:15.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #2 (rev 21)
> 00:19.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #2 (rev 21)
> 00:19.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #4 (rev 21)
> 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
> 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
> 00:1e.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO SPI Controller #0 (rev 21)
> 00:1e.4 SD Host controller: Intel Corporation Device 9d2b (rev 21)
> 00:1f.0 ISA bridge: Intel Corporation Device 9d4b (rev 21)
> 00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
> 00:1f.3 Multimedia audio controller: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
> 00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
> 00:1f.5 Non-VGA unclassified device: Intel Corporation Device 9d24 (rev 21)
>
> After suspending and resuming the card appears:
>
> pixelbook% lspci
> 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation HD Graphics 615 (rev 02)
> 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 02)
> 00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
> 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
> 00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
> 00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
> 00:15.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #2 (rev 21)
> 00:19.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #2 (rev 21)
> 00:19.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #4 (rev 21)
> 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
> 00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
> 00:1e.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO SPI Controller #0 (rev 21)
> 00:1e.4 SD Host controller: Intel Corporation Device 9d2b (rev 21)
> 00:1f.0 ISA bridge: Intel Corporation Device 9d4b (rev 21)
> 00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
> 00:1f.3 Multimedia audio controller: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
> 00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
> 00:1f.5 Non-VGA unclassified device: Intel Corporation Device 9d24 (rev 21)
> 01:00.0 Network controller: Intel Corporation Wireless 7265 (rev b9)
>
>>
>>>>
>>>>>
>>>>>>
>>>>>> [ 0.000000] Linux version 6.18.0-rc1-local-00203-g6f3b6e91f720 (avm99963@pixelbook) (gcc (GCC) 15.2.1 20250813, GNU ld (GNU Binutils) 2.45.0) #4 SMP PREEMPT_DYNAMIC Fri Oct 17 22:17:39 CEST 2025
>>>>>> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-local root=/dev/mapper/VolGroup00-root rw loglevel=3 quiet cryptdevice=UUID=70c55651-98b6-4a3d-9c6a-9f9e70c23225:cryptroot root=/dev/VolGroup00/root
>>>>>> [ 0.000000] BIOS-provided physical RAM map:
>>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved
>>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
>>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
>>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007a7bffff] usable
>>>>>> [ 0.000000] BIOS-e820: [mem 0x000000007a7c0000-0x000000007a9c7fff] reserved
>>>>>> [ 0.000000] BIOS-e820: [mem 0x000000007a9c8000-0x000000007a9cffff] usable
>>>>>> [ 0.000000] BIOS-e820: [mem 0x000000007a9d0000-0x000000007a9e4fff] ACPI data
>>>>>> [ 0.000000] BIOS-e820: [mem 0x000000007a9e5000-0x000000007a9e5fff] usable
>>>>>> [ 0.000000] BIOS-e820: [mem 0x000000007a9e6000-0x000000007fffffff] reserved
>>>>>> [ 0.000000] BIOS-e820: [mem 0x00000000ffbc0000-0x00000000ffbfffff] reserved
>>>>>> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027effffff] usable
>>>>>> [ 0.000000] NX (Execute Disable) protection: active
>>>>>> [ 0.000000] APIC: Static calls initialized
>>>>>> [ 0.000000] efi: EFI v2.7 by EDK II
>>>>>> [ 0.000000] efi: SMBIOS=0x7a8ca000 SMBIOS 3.0=0x7a8c8000 ACPI=0x7a9e4000 ACPI 2.0=0x7a9e4014 MEMATTR=0x7794d018 INITRD=0x7794ee98
>>>>>> [ 0.000000] efi: Remove mem92: MMIO range=[0xffbc0000-0xffbfffff] (0MB) from e820 map
>>>>>> [ 0.000000] e820: remove [mem 0xffbc0000-0xffbfffff] reserved
>>>>>> [ 0.000000] SMBIOS 3.0.0 present.
>>>>>> [ 0.000000] DMI: Google Eve/Eve, BIOS MrChromebox-2408.1 09/14/2024
>>>>>> [ 0.000000] DMI: Memory slots populated: 2/2
>>>>>> [ 0.000000] tsc: Detected 1600.000 MHz processor
>>>>>> [ 0.000000] tsc: Detected 1599.960 MHz TSC
>>>>>> [ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>>>>>> [ 0.000012] e820: remove [mem 0x000a0000-0x000fffff] usable
>>>>>> [ 0.000017] last_pfn = 0x27f000 max_arch_pfn = 0x400000000
>>>>>> [ 0.000023] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs
>>>>>> [ 0.000025] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
>>>>>> [ 0.000418] last_pfn = 0x7a9e6 max_arch_pfn = 0x400000000
>>>>>> [ 0.008228] Using GB pages for direct mapping
>>>>>> [ 0.008466] Secure boot disabled
>>>>>> [ 0.008466] RAMDISK: [mem 0x7180f000-0x7379ffff]
>>>>>> [ 0.008510] ACPI: Early table checksum verification disabled
>>>>>> [ 0.008513] ACPI: RSDP 0x000000007A9E4014 000024 (v02 COREv4)
>>>>>> [ 0.008517] ACPI: XSDT 0x000000007A9E30E8 00007C (v01 COREv4 COREBOOT 00000000 01000013)
>>>>>> [ 0.008529] ACPI: FACP 0x000000007A9E2000 000114 (v06 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008535] ACPI: DSDT 0x000000007A9DD000 00470C (v02 COREv4 COREBOOT 20110725 INTL 20230628)
>>>>>> [ 0.008538] ACPI: FACS 0x000000007A9FE240 000040
>>>>>> [ 0.008541] ACPI: SSDT 0x000000007A9DB000 001865 (v02 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008544] ACPI: MCFG 0x000000007A9DA000 00003C (v01 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008547] ACPI: TPM2 0x000000007A9D9000 00004C (v04 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008550] ACPI: LPIT 0x000000007A9D8000 000094 (v00 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008553] ACPI: APIC 0x000000007A9D7000 000072 (v03 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008556] ACPI: NHLT 0x000000007A9D6000 000388 (v05 GOOGLE EVEMAX 00000000 CORE 00000000)
>>>>>> [ 0.008559] ACPI: DMAR 0x000000007A9D5000 000088 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008562] ACPI: DBG2 0x000000007A9D4000 000061 (v00 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008565] ACPI: HPET 0x000000007A9D3000 000038 (v01 COREv4 COREBOOT 00000000 CORE 20230628)
>>>>>> [ 0.008568] ACPI: BGRT 0x000000007A9D2000 000038 (v01 INTEL EDK2 00000002 01000013)
>>>>>> [ 0.008570] ACPI: Reserving FACP table memory at [mem 0x7a9e2000-0x7a9e2113]
>>>>>> [ 0.008572] ACPI: Reserving DSDT table memory at [mem 0x7a9dd000-0x7a9e170b]
>>>>>> [ 0.008573] ACPI: Reserving FACS table memory at [mem 0x7a9fe240-0x7a9fe27f]
>>>>>> [ 0.008574] ACPI: Reserving SSDT table memory at [mem 0x7a9db000-0x7a9dc864]
>>>>>> [ 0.008574] ACPI: Reserving MCFG table memory at [mem 0x7a9da000-0x7a9da03b]
>>>>>> [ 0.008575] ACPI: Reserving TPM2 table memory at [mem 0x7a9d9000-0x7a9d904b]
>>>>>> [ 0.008576] ACPI: Reserving LPIT table memory at [mem 0x7a9d8000-0x7a9d8093]
>>>>>> [ 0.008577] ACPI: Reserving APIC table memory at [mem 0x7a9d7000-0x7a9d7071]
>>>>>> [ 0.008577] ACPI: Reserving NHLT table memory at [mem 0x7a9d6000-0x7a9d6387]
>>>>>> [ 0.008578] ACPI: Reserving DMAR table memory at [mem 0x7a9d5000-0x7a9d5087]
>>>>>> [ 0.008579] ACPI: Reserving DBG2 table memory at [mem 0x7a9d4000-0x7a9d4060]
>>>>>> [ 0.008580] ACPI: Reserving HPET table memory at [mem 0x7a9d3000-0x7a9d3037]
>>>>>> [ 0.008580] ACPI: Reserving BGRT table memory at [mem 0x7a9d2000-0x7a9d2037]
>>>>>> [ 0.008702] No NUMA configuration found
>>>>>> [ 0.008702] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
>>>>>> [ 0.008712] NODE_DATA(0) allocated [mem 0x27efd5280-0x27effffff]
>>>>>> [ 0.008936] Zone ranges:
>>>>>> [ 0.008937] DMA [mem 0x0000000000001000-0x0000000000ffffff]
>>>>>> [ 0.008939] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
>>>>>> [ 0.008940] Normal [mem 0x0000000100000000-0x000000027effffff]
>>>>>> [ 0.008941] Device empty
>>>>>> [ 0.008942] Movable zone start for each node
>>>>>> [ 0.008944] Early memory node ranges
>>>>>> [ 0.008945] node 0: [mem 0x0000000000001000-0x000000000009ffff]
>>>>>> [ 0.008946] node 0: [mem 0x0000000000100000-0x000000007a7bffff]
>>>>>> [ 0.008947] node 0: [mem 0x000000007a9c8000-0x000000007a9cffff]
>>>>>> [ 0.008948] node 0: [mem 0x000000007a9e5000-0x000000007a9e5fff]
>>>>>> [ 0.008949] node 0: [mem 0x0000000100000000-0x000000027effffff]
>>>>>> [ 0.008951] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
>>>>>> [ 0.008956] On node 0, zone DMA: 1 pages in unavailable ranges
>>>>>> [ 0.008977] On node 0, zone DMA: 96 pages in unavailable ranges
>>>>>> [ 0.011697] On node 0, zone DMA32: 520 pages in unavailable ranges
>>>>>> [ 0.011699] On node 0, zone DMA32: 21 pages in unavailable ranges
>>>>>> [ 0.020519] On node 0, zone Normal: 22042 pages in unavailable ranges
>>>>>> [ 0.020555] On node 0, zone Normal: 4096 pages in unavailable ranges
>>>>>> [ 0.020571] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
>>>>>> [ 0.020910] ACPI: PM-Timer IO Port: 0x1808
>>>>>> [ 0.020918] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>>>>>> [ 0.020952] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-119
>>>>>> [ 0.020955] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>>>>>> [ 0.020957] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>>>> [ 0.020961] ACPI: Using ACPI (MADT) for SMP configuration information
>>>>>> [ 0.020962] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>>>>>> [ 0.020970] e820: update [mem 0x77382000-0x773a6fff] usable ==> reserved
>>>>>> [ 0.020977] TSC deadline timer available
>>>>>> [ 0.020982] CPU topo: Max. logical packages: 1
>>>>>> [ 0.020983] CPU topo: Max. logical dies: 1
>>>>>> [ 0.020984] CPU topo: Max. dies per package: 1
>>>>>> [ 0.020988] CPU topo: Max. threads per core: 2
>>>>>> [ 0.020989] CPU topo: Num. cores per package: 2
>>>>>> [ 0.020989] CPU topo: Num. threads per package: 4
>>>>>> [ 0.020990] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
>>>>>> [ 0.021000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
>>>>>> [ 0.021002] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>>>>>> [ 0.021004] PM: hibernation: Registered nosave memory: [mem 0x77382000-0x773a6fff]
>>>>>> [ 0.021005] PM: hibernation: Registered nosave memory: [mem 0x7a7c0000-0x7a9c7fff]
>>>>>> [ 0.021006] PM: hibernation: Registered nosave memory: [mem 0x7a9d0000-0x7a9e4fff]
>>>>>> [ 0.021008] PM: hibernation: Registered nosave memory: [mem 0x7a9e6000-0xffffffff]
>>>>>> [ 0.021009] [mem 0x80000000-0xffffffff] available for PCI devices
>>>>>> [ 0.021010] Booting paravirtualized kernel on bare hardware
>>>>>> [ 0.021012] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>>>>>> [ 0.027952] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>>>>>> [ 0.028197] percpu: Embedded 62 pages/cpu s217088 r8192 d28672 u524288
>>>>>> [ 0.028203] pcpu-alloc: s217088 r8192 d28672 u524288 alloc=1*2097152
>>>>>> [ 0.028206] pcpu-alloc: [0] 0 1 2 3
>>>>>> [ 0.028223] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-local root=/dev/mapper/VolGroup00-root rw loglevel=3 quiet cryptdevice=UUID=70c55651-98b6-4a3d-9c6a-9f9e70c23225:cryptroot root=/dev/VolGroup00/root
>>>>>> [ 0.028303] Unknown kernel command line parameters "cryptdevice=UUID=70c55651-98b6-4a3d-9c6a-9f9e70c23225:cryptroot", will be passed to user space.
>>>>>> [ 0.028331] random: crng init done
>>>>>> [ 0.028332] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
>>>>>> [ 0.029046] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
>>>>>> [ 0.029413] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
>>>>>> [ 0.029491] software IO TLB: area num 4.
>>>>>> [ 0.041091] Fallback order for Node 0: 0
>>>>>> [ 0.041094] Built 1 zonelists, mobility grouping on. Total pages: 2070376
>>>>>> [ 0.041095] Policy zone: Normal
>>>>>> [ 0.041310] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
>>>>>> [ 0.059117] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>>>>>> [ 0.059137] Kernel/User page tables isolation: enabled
>>>>>> [ 0.069313] ftrace: allocating 55182 entries in 216 pages
>>>>>> [ 0.069315] ftrace: allocated 216 pages with 4 groups
>>>>>> [ 0.069395] Dynamic Preempt: full
>>>>>> [ 0.069431] rcu: Preemptible hierarchical RCU implementation.
>>>>>> [ 0.069432] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
>>>>>> [ 0.069433] rcu: RCU priority boosting: priority 1 delay 500 ms.
>>>>>> [ 0.069438] Trampoline variant of Tasks RCU enabled.
>>>>>> [ 0.069439] Rude variant of Tasks RCU enabled.
>>>>>> [ 0.069440] Tracing variant of Tasks RCU enabled.
>>>>>> [ 0.069442] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
>>>>>> [ 0.069443] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>>>>>> [ 0.069451] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
>>>>>> [ 0.069452] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
>>>>>> [ 0.069454] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
>>>>>> [ 0.075790] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
>>>>>> [ 0.076025] rcu: srcu_init: Setting srcu_struct sizes based on contention.
>>>>>> [ 0.076282] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
>>>>>> [ 0.076332] spurious 8259A interrupt: IRQ7.
>>>>>> [ 0.076365] Console: colour dummy device 80x25
>>>>>> [ 0.076367] printk: legacy console [tty0] enabled
>>>>>> [ 0.076409] ACPI: Core revision 20250807
>>>>>> [ 0.076464] hpet: HPET dysfunctional in PC10. Force disabled.
>>>>>> [ 0.076500] APIC: Switch to symmetric I/O mode setup
>>>>>> [ 0.076502] DMAR: Host address width 39
>>>>>> [ 0.076503] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>>>>>> [ 0.076509] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
>>>>>> [ 0.076511] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>>>>>> [ 0.076516] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
>>>>>> [ 0.076518] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
>>>>>> [ 0.076521] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
>>>>>> [ 0.076523] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
>>>>>> [ 0.076524] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>>>>>> [ 0.078152] DMAR-IR: Enabled IRQ remapping in x2apic mode
>>>>>> [ 0.078154] x2apic enabled
>>>>>> [ 0.078218] APIC: Switched APIC routing to: cluster x2apic
>>>>>> [ 0.082260] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170fff30cc4, max_idle_ns: 440795237869 ns
>>>>>> [ 0.082265] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.92 BogoMIPS (lpj=1599960)
>>>>>> [ 0.082290] x86/cpu: SGX disabled or unsupported by BIOS.
>>>>>> [ 0.082295] CPU0: Thermal monitoring enabled (TM1)
>>>>>> [ 0.082336] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>>>>>> [ 0.082338] Last level dTLB entries: 4KB 64, 2MB 32, 4MB 32, 1GB 4
>>>>>> [ 0.082342] process: using mwait in idle threads
>>>>>> [ 0.082345] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
>>>>>> [ 0.082350] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
>>>>>> [ 0.082351] SRBDS: Mitigation: Microcode
>>>>>> [ 0.082354] Spectre V2 : Mitigation: IBRS
>>>>>> [ 0.082354] RETBleed: Mitigation: IBRS
>>>>>> [ 0.082355] Spectre V2 : User space: Mitigation: STIBP via prctl
>>>>>> [ 0.082356] MDS: Mitigation: Clear CPU buffers
>>>>>> [ 0.082357] MMIO Stale Data: Mitigation: Clear CPU buffers
>>>>>> [ 0.082358] VMSCAPE: Mitigation: IBPB before exit to userspace
>>>>>> [ 0.082359] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
>>>>>> [ 0.082360] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
>>>>>> [ 0.082362] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
>>>>>> [ 0.082375] GDS: Mitigation: Microcode
>>>>>> [ 0.082381] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>>>>>> [ 0.082383] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>>>>>> [ 0.082384] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>>>>>> [ 0.082386] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>>>>>> [ 0.082387] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>>>>>> [ 0.082389] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
>>>>>> [ 0.082391] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
>>>>>> [ 0.082393] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
>>>>>> [ 0.082394] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
>>>>>> [ 0.083263] Freeing SMP alternatives memory: 56K
>>>>>> [ 0.083263] pid_max: default: 32768 minimum: 301
>>>>>> [ 0.083263] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf
>>>>>> [ 0.083263] landlock: Up and running.
>>>>>> [ 0.083263] Yama: becoming mindful.
>>>>>> [ 0.083263] LSM support for eBPF active
>>>>>> [ 0.083263] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
>>>>>> [ 0.083263] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
>>>>>> [ 0.083263] smpboot: CPU0: Intel(R) Core(TM) i5-7Y57 CPU @ 1.20GHz (family: 0x6, model: 0x8e, stepping: 0x9)
>>>>>> [ 0.083263] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>>>>>> [ 0.083263] ... version: 4
>>>>>> [ 0.083263] ... bit width: 48
>>>>>> [ 0.083263] ... generic counters: 4
>>>>>> [ 0.083263] ... generic bitmap: 000000000000000f
>>>>>> [ 0.083263] ... fixed-purpose counters: 3
>>>>>> [ 0.083263] ... fixed-purpose bitmap: 0000000000000007
>>>>>> [ 0.083263] ... value mask: 0000ffffffffffff
>>>>>> [ 0.083263] ... max period: 00007fffffffffff
>>>>>> [ 0.083263] ... global_ctrl mask: 000000070000000f
>>>>>> [ 0.083263] signal: max sigframe size: 2032
>>>>>> [ 0.083263] Estimated ratio of average max frequency by base frequency (times 1024): 1856
>>>>>> [ 0.084576] rcu: Hierarchical SRCU implementation.
>>>>>> [ 0.084577] rcu: Max phase no-delay instances is 400.
>>>>>> [ 0.084640] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
>>>>>> [ 0.085138] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
>>>>>> [ 0.085184] smp: Bringing up secondary CPUs ...
>>>>>> [ 0.085291] smpboot: x86: Booting SMP configuration:
>>>>>> [ 0.085293] .... node #0, CPUs: #1 #2 #3
>>>>>> [ 0.088290] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
>>>>>> [ 0.088290] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.
>>>>>> [ 0.088291] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details.
>>>>>> [ 0.088319] smp: Brought up 1 node, 4 CPUs
>>>>>> [ 0.088319] smpboot: Total of 4 processors activated (12799.68 BogoMIPS)
>>>>>> [ 0.089319] Memory: 7971252K/8281504K available (19653K kernel code, 2902K rwdata, 10348K rodata, 4624K init, 5140K bss, 297580K reserved, 0K cma-reserved)
>>>>>> [ 0.089592] devtmpfs: initialized
>>>>>> [ 0.089592] x86/mm: Memory block size: 128MB
>>>>>> [ 0.090708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>>>>>> [ 0.090708] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
>>>>>> [ 0.090708] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
>>>>>> [ 0.090708] pinctrl core: initialized pinctrl subsystem
>>>>>> [ 0.090708] PM: RTC time: 21:10:23, date: 2025-10-18
>>>>>> [ 0.091639] NET: Registered PF_NETLINK/PF_ROUTE protocol family
>>>>>> [ 0.091859] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
>>>>>> [ 0.091917] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
>>>>>> [ 0.091972] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
>>>>>> [ 0.091980] audit: initializing netlink subsys (disabled)
>>>>>> [ 0.091993] audit: type=2000 audit(1760821823.009:1): state=initialized audit_enabled=0 res=1
>>>>>> [ 0.091993] thermal_sys: Registered thermal governor 'fair_share'
>>>>>> [ 0.091993] thermal_sys: Registered thermal governor 'bang_bang'
>>>>>> [ 0.091993] thermal_sys: Registered thermal governor 'step_wise'
>>>>>> [ 0.091993] thermal_sys: Registered thermal governor 'user_space'
>>>>>> [ 0.091993] thermal_sys: Registered thermal governor 'power_allocator'
>>>>>> [ 0.091993] cpuidle: using governor ladder
>>>>>> [ 0.091993] cpuidle: using governor menu
>>>>>> [ 0.091993] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>>>>>> [ 0.092331] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff]
>>>>>> [ 0.092347] PCI: Using configuration type 1 for base access
>>>>>> [ 0.092495] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
>>>>>> [ 0.097350] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
>>>>>> [ 0.097350] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
>>>>>> [ 0.097350] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
>>>>>> [ 0.097350] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
>>>>>> [ 0.097521] raid6: skipped pq benchmark and selected avx2x4
>>>>>> [ 0.097524] raid6: using avx2x2 recovery algorithm
>>>>>> [ 0.097601] ACPI: Added _OSI(Module Device)
>>>>>> [ 0.097603] ACPI: Added _OSI(Processor Device)
>>>>>> [ 0.097604] ACPI: Added _OSI(Processor Aggregator Device)
>>>>>> [ 0.100965] ACPI: 2 ACPI AML tables successfully acquired and loaded
>>>>>> [ 0.102809] ACPI: EC: EC started
>>>>>> [ 0.102809] ACPI: EC: interrupt blocked
>>>>>> [ 0.102809] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>>>>>> [ 0.102809] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
>>>>>> [ 0.102809] ACPI: Interpreter enabled
>>>>>> [ 0.102809] ACPI: PM: (supports S0 S3 S4 S5)
>>>>>> [ 0.102809] ACPI: Using IOAPIC for interrupt routing
>>>>>> [ 0.103032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>>>>>> [ 0.103034] PCI: Ignoring E820 reservations for host bridge windows
>>>>>> [ 0.110755] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>>>>>> [ 0.110761] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
>>>>>> [ 0.110795] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
>>>>>> [ 0.111409] PCI host bridge to bus 0000:00
>>>>>> [ 0.111414] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
>>>>>> [ 0.111416] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
>>>>>> [ 0.111419] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
>>>>>> [ 0.111421] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
>>>>>> [ 0.111423] pci_bus 0000:00: root bus resource [mem 0x27f000000-0x7fffffffff window]
>>>>>> [ 0.111425] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
>>>>>> [ 0.111426] pci_bus 0000:00: root bus resource [bus 00-ff]
>>>>>> [ 0.111455] pci 0000:00:00.0: [8086:590c] type 00 class 0x060000 conventional PCI endpoint
>>>>>> [ 0.111572] pci 0000:00:02.0: [8086:591e] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
>>>>>> [ 0.111588] pci 0000:00:02.0: BAR 0 [mem 0x90000000-0x90ffffff 64bit]
>>>>>> [ 0.111591] pci 0000:00:02.0: BAR 2 [mem 0x80000000-0x8fffffff 64bit pref]
>>>>>> [ 0.111594] pci 0000:00:02.0: BAR 4 [io 0x1000-0x103f]
>>>>>> [ 0.111607] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>>>>>> [ 0.111713] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.111732] pci 0000:00:04.0: BAR 0 [mem 0x91120000-0x91127fff 64bit]
>>>>>> [ 0.111890] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 conventional PCI endpoint
>>>>>> [ 0.111930] pci 0000:00:14.0: BAR 0 [mem 0x91100000-0x9110ffff 64bit]
>>>>>> [ 0.111968] pci 0000:00:14.0: PME# supported from D3hot D3cold
>>>>>> [ 0.112108] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.112147] pci 0000:00:14.2: BAR 0 [mem 0x91130000-0x91130fff 64bit]
>>>>>> [ 0.112263] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.112327] pci 0000:00:15.0: BAR 0 [mem 0x91131000-0x91131fff 64bit]
>>>>>> [ 0.112484] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.112542] pci 0000:00:15.1: BAR 0 [mem 0x91132000-0x91132fff 64bit]
>>>>>> [ 0.112694] pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.112752] pci 0000:00:15.2: BAR 0 [mem 0x91133000-0x91133fff 64bit]
>>>>>> [ 0.112931] pci 0000:00:19.0: [8086:9d66] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.112989] pci 0000:00:19.0: BAR 0 [mem 0xfe030000-0xfe030fff 64bit]
>>>>>> [ 0.112994] pci 0000:00:19.0: BAR 2 [mem 0x91135000-0x91135fff 64bit]
>>>>>> [ 0.113141] pci 0000:00:19.2: [8086:9d64] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.113198] pci 0000:00:19.2: BAR 0 [mem 0x91136000-0x91136fff 64bit]
>>>>>> [ 0.113379] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400 PCIe Root Port
>>>>>> [ 0.113403] pci 0000:00:1c.0: PCI bridge to [bus 01]
>>>>>> [ 0.113409] pci 0000:00:1c.0: bridge window [mem 0x91000000-0x910fffff]
>>>>>> [ 0.113478] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>>>> [ 0.113669] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.113727] pci 0000:00:1e.0: BAR 0 [mem 0x91137000-0x91137fff 64bit]
>>>>>> [ 0.113732] pci 0000:00:1e.0: BAR 2 [mem 0x91138000-0x91138fff 64bit]
>>>>>> [ 0.113881] pci 0000:00:1e.2: [8086:9d29] type 00 class 0x118000 conventional PCI endpoint
>>>>>> [ 0.113939] pci 0000:00:1e.2: BAR 0 [mem 0x91139000-0x91139fff 64bit]
>>>>>> [ 0.114092] pci 0000:00:1e.4: [8086:9d2b] type 00 class 0x080501 conventional PCI endpoint
>>>>>> [ 0.114145] pci 0000:00:1e.4: BAR 0 [mem 0x9113a000-0x9113afff 64bit]
>>>>>> [ 0.114415] pci 0000:00:1f.0: [8086:9d4b] type 00 class 0x060100 conventional PCI endpoint
>>>>>> [ 0.114585] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 conventional PCI endpoint
>>>>>> [ 0.114629] pci 0000:00:1f.2: BAR 0 [mem 0x91128000-0x9112bfff]
>>>>>> [ 0.114731] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040100 conventional PCI endpoint
>>>>>> [ 0.114784] pci 0000:00:1f.3: BAR 0 [mem 0x9112c000-0x9112ffff 64bit]
>>>>>> [ 0.114791] pci 0000:00:1f.3: BAR 4 [mem 0x91110000-0x9111ffff 64bit]
>>>>>> [ 0.114834] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>>>>>> [ 0.115021] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 conventional PCI endpoint
>>>>>> [ 0.115155] pci 0000:00:1f.4: BAR 0 [mem 0x9113c000-0x9113c0ff 64bit]
>>>>>> [ 0.115166] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
>>>>>> [ 0.115283] pci 0000:00:1f.5: [8086:9d24] type 00 class 0x000000 conventional PCI endpoint
>>>>>> [ 0.115330] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
>>>>>> [ 0.115692] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000 PCIe Endpoint
>>>>>> [ 0.115830] pci 0000:01:00.0: BAR 0 [mem 0x91000000-0x91001fff 64bit]
>>>>>> [ 0.116077] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>>>>>> [ 0.117020] pci 0000:00:1c.0: PCI bridge to [bus 01]
>>>>>> [ 0.117420] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
>>>>>> [ 0.117503] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
>>>>>> [ 0.117581] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
>>>>>> [ 0.117658] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
>>>>>> [ 0.117735] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
>>>>>> [ 0.117813] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
>>>>>> [ 0.117890] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
>>>>>> [ 0.117967] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
>>>>>> [ 0.120047] ACPI: EC: interrupt unblocked
>>>>>> [ 0.120049] ACPI: EC: event unblocked
>>>>>> [ 0.120056] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
>>>>>> [ 0.120057] ACPI: EC: GPE=0x6e
>>>>>> [ 0.120059] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
>>>>>> [ 0.120061] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
>>>>>> [ 0.120285] iommu: Default domain type: Translated
>>>>>> [ 0.120285] iommu: DMA domain TLB invalidation policy: lazy mode
>>>>>> [ 0.123452] SCSI subsystem initialized
>>>>>> [ 0.124285] libata version 3.00 loaded.
>>>>>> [ 0.124285] ACPI: bus type USB registered
>>>>>> [ 0.124305] usbcore: registered new interface driver usbfs
>>>>>> [ 0.124315] usbcore: registered new interface driver hub
>>>>>> [ 0.124322] usbcore: registered new device driver usb
>>>>>> [ 0.124365] EDAC MC: Ver: 3.0.0
>>>>>> [ 0.124624] efivars: Registered efivars operations
>>>>>> [ 0.124624] NetLabel: Initializing
>>>>>> [ 0.124624] NetLabel: domain hash size = 128
>>>>>> [ 0.124624] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
>>>>>> [ 0.124624] NetLabel: unlabeled traffic allowed by default
>>>>>> [ 0.124624] mctp: management component transport protocol core
>>>>>> [ 0.124624] NET: Registered PF_MCTP protocol family
>>>>>> [ 0.124624] PCI: Using ACPI for IRQ routing
>>>>>> [ 0.154247] PCI: pci_cache_line_size set to 64 bytes
>>>>>> [ 0.154633] e820: reserve RAM buffer [mem 0x77382000-0x77ffffff]
>>>>>> [ 0.154636] e820: reserve RAM buffer [mem 0x7a7c0000-0x7bffffff]
>>>>>> [ 0.154637] e820: reserve RAM buffer [mem 0x7a9d0000-0x7bffffff]
>>>>>> [ 0.154639] e820: reserve RAM buffer [mem 0x7a9e6000-0x7bffffff]
>>>>>> [ 0.154640] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
>>>>>> [ 0.154676] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>>>>>> [ 0.154676] pci 0000:00:02.0: vgaarb: bridge control possible
>>>>>> [ 0.154676] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>>>>>> [ 0.154676] vgaarb: loaded
>>>>>> [ 0.154676] clocksource: Switched to clocksource tsc-early
>>>>>> [ 0.155273] VFS: Disk quotas dquot_6.6.0
>>>>>> [ 0.155273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>>>>>> [ 0.156159] pnp: PnP ACPI init
>>>>>> [ 0.156288] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>>>>>> [ 0.156415] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>>>>>> [ 0.156418] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>>>>>> [ 0.156420] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>>>>>> [ 0.156423] system 00:01: [mem 0xfed90000-0xfed93fff] could not be reserved
>>>>>> [ 0.156425] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
>>>>>> [ 0.156427] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
>>>>>> [ 0.156429] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
>>>>>> [ 0.156665] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
>>>>>> [ 0.156706] system 00:03: [io 0x1800-0x18fe] has been reserved
>>>>>> [ 0.156761] system 00:05: [io 0x0900-0x09fe] has been reserved
>>>>>> [ 0.156798] system 00:06: [io 0x0200] has been reserved
>>>>>> [ 0.156801] system 00:06: [io 0x0204] has been reserved
>>>>>> [ 0.156802] system 00:06: [io 0x0800-0x087f] has been reserved
>>>>>> [ 0.156804] system 00:06: [io 0x0880-0x08ff] has been reserved
>>>>>> [ 0.157410] pnp: PnP ACPI: found 8 devices
>>>>>> [ 0.163371] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>>>>>> [ 0.163445] NET: Registered PF_INET protocol family
>>>>>> [ 0.163545] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
>>>>>> [ 0.164829] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
>>>>>> [ 0.164880] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
>>>>>> [ 0.164922] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
>>>>>> [ 0.165064] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
>>>>>> [ 0.165271] TCP: Hash tables configured (established 65536 bind 65536)
>>>>>> [ 0.165334] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
>>>>>> [ 0.165370] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
>>>>>> [ 0.165406] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
>>>>>> [ 0.165460] NET: Registered PF_UNIX/PF_LOCAL protocol family
>>>>>> [ 0.165466] NET: Registered PF_XDP protocol family
>>>>>> [ 0.165474] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
>>>>>> [ 0.165478] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
>>>>>> [ 0.165488] pci 0000:00:1c.0: bridge window [mem 0x27f000000-0x27f1fffff 64bit pref]: assigned
>>>>>> [ 0.165491] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned
>>>>>> [ 0.165494] pci 0000:00:1c.0: PCI bridge to [bus 01]
>>>>>> [ 0.165506] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
>>>>>> [ 0.165510] pci 0000:00:1c.0: bridge window [mem 0x91000000-0x910fffff]
>>>>>> [ 0.165513] pci 0000:00:1c.0: bridge window [mem 0x27f000000-0x27f1fffff 64bit pref]
>>>>>> [ 0.165519] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
>>>>>> [ 0.165521] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
>>>>>> [ 0.165522] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000fffff window]
>>>>>> [ 0.165524] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
>>>>>> [ 0.165525] pci_bus 0000:00: resource 8 [mem 0x27f000000-0x7fffffffff window]
>>>>>> [ 0.165527] pci_bus 0000:00: resource 9 [mem 0xfc800000-0xfe7fffff window]
>>>>>> [ 0.165529] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
>>>>>> [ 0.165530] pci_bus 0000:01: resource 1 [mem 0x91000000-0x910fffff]
>>>>>> [ 0.165531] pci_bus 0000:01: resource 2 [mem 0x27f000000-0x27f1fffff 64bit pref]
>>>>>> [ 0.166044] PCI: CLS 64 bytes, default 64
>>>>>> [ 0.166094] pci 0000:00:1f.1: [8086:9d20] type 00 class 0x058000 conventional PCI endpoint
>>>>>> [ 0.166250] pci 0000:00:1f.1: BAR 0 [mem 0xfd000000-0xfdffffff 64bit]
>>>>>> [ 0.166423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>>>> [ 0.166424] software IO TLB: mapped [mem 0x000000006d80f000-0x000000007180f000] (64MB)
>>>>>> [ 0.166478] Unpacking initramfs...
>>>>>> [ 0.172544] Initialise system trusted keyrings
>>>>>> [ 0.172556] Key type blacklist registered
>>>>>> [ 0.172627] workingset: timestamp_bits=36 max_order=21 bucket_order=0
>>>>>> [ 0.172958] fuse: init (API version 7.45)
>>>>>> [ 0.173070] integrity: Platform Keyring initialized
>>>>>> [ 0.173074] integrity: Machine keyring initialized
>>>>>> [ 0.191994] xor: automatically using best checksumming function avx
>>>>>> [ 0.192000] Key type asymmetric registered
>>>>>> [ 0.192003] Asymmetric key parser 'x509' registered
>>>>>> [ 0.192035] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
>>>>>> [ 0.192134] io scheduler mq-deadline registered
>>>>>> [ 0.192136] io scheduler kyber registered
>>>>>> [ 0.192168] io scheduler bfq registered
>>>>>> [ 0.196120] ledtrig-cpu: registered to indicate activity on CPUs
>>>>>> [ 0.196393] pcieport 0000:00:1c.0: PME: Signaling with IRQ 120
>>>>>> [ 0.196506] pcieport 0000:00:1c.0: AER: enabled with IRQ 120
>>>>>> [ 0.196539] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
>>>>>> [ 0.196802] pcieport 0000:00:1c.0: pciehp: Slot(0): Card not present
>>>>>> [ 0.196925] pcieport 0000:00:1c.0: pciehp: Slot(0): Card present
>>>>>> [ 0.196927] pcieport 0000:00:1c.0: pciehp: Slot(0): Link Up
>>>>>> [ 0.197253] ACPI: AC: AC Adapter [AC] (on-line)
>>>>>> [ 0.197307] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/PNP0C09:00/PNP0C0D:00/input/input0
>>>>>> [ 0.198136] ACPI: button: Lid Switch [LID0]
>>>>>> [ 0.198180] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>>>>>> [ 0.198229] ACPI: button: Power Button [PWRF]
>>>>>> [ 0.198346] Monitor-Mwait will be used to enter C-1 state
>>>>>> [ 0.198356] Monitor-Mwait will be used to enter C-2 state
>>>>>> [ 0.198364] Monitor-Mwait will be used to enter C-3 state
>>>>>> [ 0.198761] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>>>>>> [ 0.200509] ACPI: battery: Slot [BAT0] (battery present)
>>>>>> [ 0.201500] hpet_acpi_add: no address or irqs in _CRS
>>>>>> [ 0.201539] Non-volatile memory driver v1.3
>>>>>> [ 0.201541] Linux agpgart interface v0.103
>>>>>> [ 0.201597] ACPI: bus type drm_connector registered
>>>>>> [ 0.202134] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>>>> [ 0.202141] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>>>>>> [ 0.203247] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
>>>>>> [ 0.203575] xhci_hcd 0000:00:14.0: xHCI Host Controller
>>>>>> [ 0.203579] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>>>>>> [ 0.203582] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
>>>>>> [ 0.203628] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
>>>>>> [ 0.203630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>>>> [ 0.203632] usb usb1: Product: xHCI Host Controller
>>>>>> [ 0.203634] usb usb1: Manufacturer: Linux 6.18.0-rc1-local-00203-g6f3b6e91f720 xhci-hcd
>>>>>> [ 0.203636] usb usb1: SerialNumber: 0000:00:14.0
>>>>>> [ 0.203764] hub 1-0:1.0: USB hub found
>>>>>> [ 0.203791] hub 1-0:1.0: 12 ports detected
>>>>>> [ 0.204190] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
>>>>>> [ 0.204193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>>>>>> [ 0.204195] usb usb2: Product: xHCI Host Controller
>>>>>> [ 0.204197] usb usb2: Manufacturer: Linux 6.18.0-rc1-local-00203-g6f3b6e91f720 xhci-hcd
>>>>>> [ 0.204198] usb usb2: SerialNumber: 0000:00:14.0
>>>>>> [ 0.204291] hub 2-0:1.0: USB hub found
>>>>>> [ 0.204313] hub 2-0:1.0: 6 ports detected
>>>>>> [ 0.204573] usbcore: registered new interface driver usbserial_generic
>>>>>> [ 0.204579] usbserial: USB Serial support registered for generic
>>>>>> [ 0.204610] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>>>>>> [ 0.204612] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>>>>>> [ 0.205478] i8042: Warning: Keylock active
>>>>>> [ 0.205738] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>>>> [ 0.205881] rtc_cmos 00:04: RTC can wake from S4
>>>>>> [ 0.206592] rtc_cmos 00:04: registered as rtc0
>>>>>> [ 0.206732] rtc_cmos 00:04: setting system clock to 2025-10-18T21:10:23 UTC (1760821823)
>>>>>> [ 0.206770] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram
>>>>>> [ 0.206856] intel_pstate: Intel P-state driver initializing
>>>>>> [ 0.207016] intel_pstate: HWP enabled
>>>>>> [ 0.207246] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
>>>>>> [ 0.207249] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
>>>>>> [ 0.209363] fbcon: Deferring console take-over
>>>>>> [ 0.209367] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
>>>>>> [ 0.209417] hid: raw HID events driver (C) Jiri Kosina
>>>>>> [ 0.209449] usbcore: registered new interface driver usbhid
>>>>>> [ 0.209451] usbhid: USB HID core driver
>>>>>> [ 0.209537] drop_monitor: Initializing network drop monitor service
>>>>>> [ 0.209632] NET: Registered PF_INET6 protocol family
>>>>>> [ 0.210042] Segment Routing with IPv6
>>>>>> [ 0.210043] RPL Segment Routing with IPv6
>>>>>> [ 0.210051] In-situ OAM (IOAM) with IPv6
>>>>>> [ 0.210074] NET: Registered PF_PACKET protocol family
>>>>>> [ 0.212134] microcode: Current revision: 0x000000f6
>>>>>> [ 0.212136] microcode: Updated early from: 0x000000f4
>>>>>> [ 0.212209] IPI shorthand broadcast: enabled
>>>>>> [ 0.213660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>>>>>> [ 0.214998] sched_clock: Marking stable (208002134, 6104162)->(260101971, -45995675)
>>>>>> [ 0.215163] registered taskstats version 1
>>>>>> [ 0.215278] Loading compiled-in X.509 certificates
>>>>>> [ 0.245607] Freeing initrd memory: 32324K
>>>>>> [ 0.252000] Loaded X.509 cert 'Build time autogenerated kernel key: e31fb6d0a47fcad14d2a2827e4b138b36bae4b21'
>>>>>> [ 0.255096] zswap: loaded using pool zstd
>>>>>> [ 0.255271] Demotion targets for Node 0: null
>>>>>> [ 0.255562] Key type .fscrypt registered
>>>>>> [ 0.255564] Key type fscrypt-provisioning registered
>>>>>> [ 0.255822] Btrfs loaded, zoned=yes, fsverity=yes
>>>>>> [ 0.255841] Key type big_key registered
>>>>>> [ 0.255877] integrity: Loading X.509 certificate: UEFI:db
>>>>>> [ 0.255902] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
>>>>>> [ 0.255904] integrity: Loading X.509 certificate: UEFI:db
>>>>>> [ 0.255919] integrity: Loaded X.509 cert 'Microsoft Corporation: Windows UEFI CA 2023: aefc5fbbbe055d8f8daa585473499417ab5a5272'
>>>>>> [ 0.255920] integrity: Loading X.509 certificate: UEFI:db
>>>>>> [ 0.255934] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
>>>>>> [ 0.255935] integrity: Loading X.509 certificate: UEFI:db
>>>>>> [ 0.255948] integrity: Loaded X.509 cert 'Microsoft UEFI CA 2023: 81aa6b3244c935bce0d6628af39827421e32497d'
>>>>>> [ 0.255950] integrity: Loading X.509 certificate: UEFI:db
>>>>>> [ 0.259490] integrity: Loaded X.509 cert 'System76 Secure Boot Database Key: 3a7a94cfb9868ddcd29105224b504d54b1f9d238'
>>>>>> [ 0.260718] PM: Magic number: 13:223:197
>>>>>> [ 0.260764] acpi PNP0100:00: hash matches
>>>>>> [ 0.260811] RAS: Correctable Errors collector initialized.
>>>>>> [ 0.260843] clk: Disabling unused clocks
>>>>>> [ 0.262016] Freeing unused decrypted memory: 2036K
>>>>>> [ 0.262768] Freeing unused kernel image (initmem) memory: 4624K
>>>>>> [ 0.262870] Write protecting the kernel read-only data: 32768k
>>>>>> [ 0.263286] Freeing unused kernel image (text/rodata gap) memory: 824K
>>>>>> [ 0.263806] Freeing unused kernel image (rodata/data gap) memory: 1940K
>>>>>> [ 0.313739] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>>>>>> [ 0.313744] rodata_test: all tests were successful
>>>>>> [ 0.313746] x86/mm: Checking user space page tables
>>>>>> [ 0.383969] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>>>>>> [ 0.383974] Run /init as init process
>>>>>> [ 0.383976] with arguments:
>>>>>> [ 0.383977] /init
>>>>>> [ 0.383978] with environment:
>>>>>> [ 0.383979] HOME=/
>>>>>> [ 0.383980] TERM=linux
>>>>>> [ 0.383981] cryptdevice=UUID=70c55651-98b6-4a3d-9c6a-9f9e70c23225:cryptroot
>>>>>> [ 0.461131] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>>>>>> [ 0.601446] usb 1-2: New USB device found, idVendor=0bda, idProduct=564b, bcdDevice= 0.06
>>>>>> [ 0.601454] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>>>>>> [ 0.601458] usb 1-2: Product: WebCamera
>>>>>> [ 0.601460] usb 1-2: Manufacturer: Generic
>>>>>> [ 0.601462] usb 1-2: SerialNumber: \x07LOE65001063010A7B100DF5AI06BF12000
>>>>>> [ 0.697154] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
>>>>>> [ 0.698951] sdhci: Secure Digital Host Controller Interface driver
>>>>>> [ 0.698958] sdhci: Copyright(c) Pierre Ossman
>>>>>> [ 0.708576] usb 2-2: New USB device found, idVendor=1d5c, idProduct=5001, bcdDevice= 1.00
>>>>>> [ 0.708583] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>>>>>> [ 0.708586] usb 2-2: Product: USB3.0 Hub
>>>>>> [ 0.708589] usb 2-2: Manufacturer: Fresco Logic, Inc.
>>>>>> [ 0.709438] hub 2-2:1.0: USB hub found
>>>>>> [ 0.710112] hub 2-2:1.0: 4 ports detected
>>>>>> [ 0.719650] sdhci-pci 0000:00:1e.4: SDHCI controller found [8086:9d2b] (rev 21)
>>>>>> [ 0.720149] mmc0: SDHCI controller on PCI [0000:00:1e.4] using ADMA 64-bit
>>>>>> [ 0.816811] mmc0: new HS400 MMC card at address 0001
>>>>>> [ 0.823132] usb 1-3: new full-speed USB device number 3 using xhci_hcd
>>>>>> [ 0.947335] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.03
>>>>>> [ 0.947339] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>>>>>> [ 1.060112] usb 1-5: new high-speed USB device number 4 using xhci_hcd
>>>>>> [ 1.183476] usb 1-5: New USB device found, idVendor=1d5c, idProduct=5011, bcdDevice= 1.00
>>>>>> [ 1.183481] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>>>>>> [ 1.183484] usb 1-5: Product: USB2.0 Hub
>>>>>> [ 1.183486] usb 1-5: Manufacturer: Fresco Logic, Inc.
>>>>>> [ 1.184313] hub 1-5:1.0: USB hub found
>>>>>> [ 1.184339] hub 1-5:1.0: 5 ports detected
>>>>>> [ 1.202131] tsc: Refined TSC clocksource calibration: 1608.000 MHz
>>>>>> [ 1.202139] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x172daa3a18b, max_idle_ns: 440795212390 ns
>>>>>> [ 1.202156] clocksource: Switched to clocksource tsc
>>>>>> [ 1.251011] usb 2-2.4: new SuperSpeed USB device number 3 using xhci_hcd
>>>>>> [ 1.400127] pcieport 0000:00:1c.0: pciehp: Slot(0): No device found
>>>>>> [ 1.408639] i915 0000:00:02.0: [drm] Found kabylake/ulx (device ID 591e) integrated display version 9.00 stepping B0
>>>>>> [ 1.413103] mmcblk0: mmc0:0001 DURM4R 116 GiB
>>>>>> [ 1.419538] mmcblk0: p1 p2
>>>>>> [ 1.419806] mmcblk0boot0: mmc0:0001 DURM4R 4.00 MiB
>>>>>> [ 1.420507] mmcblk0boot1: mmc0:0001 DURM4R 4.00 MiB
>>>>>> [ 1.421061] mmcblk0rpmb: mmc0:0001 DURM4R 4.00 MiB, chardev (239:0)
>>>>>> [ 1.425660] i915 0000:00:02.0: vgaarb: deactivate vga console
>>>>>> [ 1.476640] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>>>>>> [ 1.478624] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
>>>>>> [ 1.504648] i915 0000:00:02.0: [drm] Registered 3 planes with drm panic
>>>>>> [ 1.504661] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
>>>>>> [ 1.505235] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
>>>>>> [ 1.505472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>>>>>> [ 1.537542] usb 2-2.4: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 2.00
>>>>>> [ 1.537547] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>>>>>> [ 1.537551] usb 2-2.4: Product: AX88179A
>>>>>> [ 1.537553] usb 2-2.4: Manufacturer: ASIX
>>>>>> [ 1.537555] usb 2-2.4: SerialNumber: 00A0CEC83D617A
>>>>>> [ 1.548656] fbcon: i915drmfb (fb0) is primary device
>>>>>> [ 1.548661] fbcon: Deferring console take-over
>>>>>> [ 1.548665] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
>>>>>> [ 1.626802] device-mapper: uevent: version 1.0.3
>>>>>> [ 1.626879] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
>>>>>> [ 1.643281] Key type encrypted registered
>>>>>> [ 1.662391] fbcon: Taking over console
>>>>>> [ 1.702574] Console: switching to colour frame buffer device 150x50
>>>>>> [ 1.716119] usb 1-5.5: new high-speed USB device number 5 using xhci_hcd
>>>>>> [ 1.800655] usb 1-5.5: New USB device found, idVendor=1d5c, idProduct=5100, bcdDevice= 1.00
>>>>>> [ 1.800665] usb 1-5.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>>>>>> [ 1.800669] usb 1-5.5: Product: Generic Billboard Device
>>>>>> [ 1.800673] usb 1-5.5: Manufacturer: Fresco Logic, Inc
>>>>>> [ 9.381975] BTRFS: device label data devid 1 transid 94512 /dev/mapper/VolGroup00-root (253:1) scanned by mount (302)
>>>>>> [ 9.382550] BTRFS info (device dm-1): first mount of filesystem 300f4e51-7c51-404c-96d9-1b224c97606d
>>>>>> [ 9.382566] BTRFS info (device dm-1): using crc32c (crc32c-lib) checksum algorithm
>>>>>> [ 9.419939] BTRFS info (device dm-1): enabling ssd optimizations
>>>>>> [ 9.419947] BTRFS info (device dm-1): turning on async discard
>>>>>> [ 9.419950] BTRFS info (device dm-1): enabling free space tree
>>>>>> [ 9.702625] systemd[1]: systemd 258.1-1-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
>>>>>> [ 9.702639] systemd[1]: Detected architecture x86-64.
>>>>>> [ 9.703699] systemd[1]: Hostname set to <pixelbook>.
>>>>>> [ 9.792379] systemd[1]: bpf-restrict-fs: Failed to load BPF object: No such process
>>>>>> [ 10.326434] systemd[1]: Queued start job for default target Graphical Interface.
>>>>>> [ 10.348754] systemd[1]: Created slice Slice /system/dirmngr.
>>>>>> [ 10.349307] systemd[1]: Created slice Slice /system/getty.
>>>>>> [ 10.349761] systemd[1]: Created slice Slice /system/gpg-agent.
>>>>>> [ 10.350258] systemd[1]: Created slice Slice /system/gpg-agent-browser.
>>>>>> [ 10.350580] systemd[1]: Created slice Slice /system/gpg-agent-extra.
>>>>>> [ 10.350900] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
>>>>>> [ 10.351262] systemd[1]: Created slice Slice /system/keyboxd.
>>>>>> [ 10.351587] systemd[1]: Created slice Slice /system/modprobe.
>>>>>> [ 10.351902] systemd[1]: Created slice Slice /system/systemd-fsck.
>>>>>> [ 10.352192] systemd[1]: Created slice User and Session Slice.
>>>>>> [ 10.352256] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>>>>>> [ 10.352307] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>>>>>> [ 10.352492] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>>>>>> [ 10.352513] systemd[1]: Expecting device /dev/disk/by-uuid/8178-5AD1...
>>>>>> [ 10.352525] systemd[1]: Reached target Local Encrypted Volumes.
>>>>>> [ 10.352544] systemd[1]: Reached target Image Downloads.
>>>>>> [ 10.352553] systemd[1]: Reached target Local Integrity Protected Volumes.
>>>>>> [ 10.352569] systemd[1]: Reached target Path Units.
>>>>>> [ 10.352582] systemd[1]: Reached target Remote File Systems.
>>>>>> [ 10.352591] systemd[1]: Reached target Slice Units.
>>>>>> [ 10.352619] systemd[1]: Reached target Local Verity Protected Volumes.
>>>>>> [ 10.352700] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>>>>>> [ 10.352775] systemd[1]: Listening on LVM2 poll daemon socket.
>>>>>> [ 10.353679] systemd[1]: Listening on Query the User Interactively for a Password.
>>>>>> [ 10.354771] systemd[1]: Listening on Process Core Dump Socket.
>>>>>> [ 10.355419] systemd[1]: Listening on Credential Encryption/Decryption.
>>>>>> [ 10.356321] systemd[1]: Listening on Factory Reset Management.
>>>>>> [ 10.356425] systemd[1]: Listening on Journal Socket (/dev/log).
>>>>>> [ 10.356517] systemd[1]: Listening on Journal Sockets.
>>>>>> [ 10.356928] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>>>>>> [ 10.356950] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>>>>>> [ 10.357038] systemd[1]: Listening on udev Control Socket.
>>>>>> [ 10.357098] systemd[1]: Listening on udev Kernel Socket.
>>>>>> [ 10.357203] systemd[1]: Listening on udev Varlink Socket.
>>>>>> [ 10.357271] systemd[1]: Listening on User Database Manager Socket.
>>>>>> [ 10.360041] systemd[1]: Mounting Huge Pages File System...
>>>>>> [ 10.361142] systemd[1]: Mounting POSIX Message Queue File System...
>>>>>> [ 10.362415] systemd[1]: Mounting Kernel Debug File System...
>>>>>> [ 10.363564] systemd[1]: Mounting Kernel Trace File System...
>>>>>> [ 10.367005] systemd[1]: Starting Create List of Static Device Nodes...
>>>>>> [ 10.368390] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>>>>>> [ 10.368440] systemd[1]: Load Kernel Module configfs was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!configfs).
>>>>>> [ 10.369759] systemd[1]: Mounting Kernel Configuration File System...
>>>>>> [ 10.369840] systemd[1]: Load Kernel Module dm_mod was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!dm_mod).
>>>>>> [ 10.369901] systemd[1]: Load Kernel Module drm was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!drm).
>>>>>> [ 10.369953] systemd[1]: Load Kernel Module fuse was skipped because of an unmet condition check (ConditionKernelModuleLoaded=!fuse).
>>>>>> [ 10.373291] systemd[1]: Mounting FUSE Control File System...
>>>>>> [ 10.376196] systemd[1]: Starting Load Kernel Module loop...
>>>>>> [ 10.376286] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
>>>>>> [ 10.379326] systemd[1]: Starting Journal Service...
>>>>>> [ 10.383688] systemd[1]: Starting Load Kernel Modules...
>>>>>> [ 10.383723] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>>>>>> [ 10.390195] systemd[1]: Starting Remount Root and Kernel File Systems...
>>>>>> [ 10.390317] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>>>>>> [ 10.393256] systemd[1]: Starting Load udev Rules from Credentials...
>>>>>> [ 10.395497] systemd[1]: Starting Coldplug All udev Devices...
>>>>>> [ 10.412631] loop: module loaded
>>>>>> [ 10.413076] systemd[1]: Mounted Huge Pages File System.
>>>>>> [ 10.413404] systemd[1]: Mounted POSIX Message Queue File System.
>>>>>> [ 10.413579] systemd[1]: Mounted Kernel Debug File System.
>>>>>> [ 10.413772] systemd[1]: Mounted Kernel Trace File System.
>>>>>> [ 10.414320] systemd[1]: Finished Create List of Static Device Nodes.
>>>>>> [ 10.414646] systemd[1]: Mounted Kernel Configuration File System.
>>>>>> [ 10.414838] systemd[1]: Mounted FUSE Control File System.
>>>>>> [ 10.415343] systemd[1]: modprobe@loop.service: Deactivated successfully.
>>>>>> [ 10.415757] BTRFS info (device dm-1 state M): turning on sync discard
>>>>>> [ 10.415762] BTRFS info (device dm-1 state M): enabling auto defrag
>>>>>> [ 10.415765] BTRFS info (device dm-1 state M): use lzo compression, level 1
>>>>>> [ 10.416174] systemd[1]: Finished Load Kernel Module loop.
>>>>>> [ 10.418448] systemd[1]: Repartition Root Disk was skipped because no trigger condition checks were met.
>>>>>> [ 10.422327] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
>>>>>> [ 10.426240] systemd[1]: Finished Remount Root and Kernel File Systems.
>>>>>> [ 10.428205] systemd[1]: Finished Load udev Rules from Credentials.
>>>>>> [ 10.429701] systemd[1]: Finished Load Kernel Modules.
>>>>>> [ 10.431501] systemd[1]: Activating swap /swap/swapfile...
>>>>>> [ 10.433097] systemd[1]: Rebuild Hardware Database was skipped because of an unmet condition check (ConditionNeedsUpdate=/etc).
>>>>>> [ 10.433401] systemd-journald[369]: Collecting audit messages is disabled.
>>>>>> [ 10.441090] systemd[1]: Starting Load/Save OS Random Seed...
>>>>>> [ 10.445236] systemd[1]: Starting Apply Kernel Variables...
>>>>>> [ 10.445286] systemd[1]: TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
>>>>>> [ 10.449289] Adding 2097148k swap on /swap/swapfile. Priority:-2 extents:2 across:2228220k SS
>>>>>> [ 10.450570] systemd[1]: Activated swap /swap/swapfile.
>>>>>> [ 10.451011] systemd[1]: Reached target Swaps.
>>>>>> [ 10.455230] systemd[1]: Mounting Temporary Directory /tmp...
>>>>>> [ 10.457185] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>>>>>> [ 10.498662] systemd[1]: Started Journal Service.
>>>>>> [ 10.548500] systemd-journald[369]: Received client request to flush runtime journal.
>>>>>> [ 11.450992] cros_ec_lpcs GOOG0004:00: Chrome EC device registered
>>>>>> [ 11.460499] intel_pmc_core INT33A1:00: initialized
>>>>>> [ 11.492489] input: Tablet Mode Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/PNP0C09:00/GOOG0004:00/GOOG0006:00/input/input4
>>>>>> [ 11.561074] idma64 idma64.0: Found Intel integrated DMA 64-bit
>>>>>> [ 11.567530] idma64 idma64.1: Found Intel integrated DMA 64-bit
>>>>>> [ 11.583077] cr50_i2c i2c-GOOG0005:00: cr50 TPM 2.0 (i2c 0x50 irq 24 id 0x28)
>>>>>> [ 11.602439] i801_smbus 0000:00:1f.4: SPD Write Disable is set
>>>>>> [ 11.602457] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
>>>>>> [ 11.622699] input: PC Speaker as /devices/platform/pcspkr/input/input5
>>>>>> [ 11.718329] input: WCOM50C1:00 2D1F:5143 Touchscreen as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input6
>>>>>> [ 11.718435] input: WCOM50C1:00 2D1F:5143 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input7
>>>>>> [ 11.718527] input: WCOM50C1:00 2D1F:5143 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input8
>>>>>> [ 11.718612] input: WCOM50C1:00 2D1F:5143 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input9
>>>>>> [ 11.720179] input: WCOM50C1:00 2D1F:5143 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input10
>>>>>> [ 11.720680] hid-generic 0018:2D1F:5143.0001: input,hidraw0: I2C HID v1.00 Mouse [WCOM50C1:00 2D1F:5143] on i2c-WCOM50C1:00
>>>>>> [ 11.876421] idma64 idma64.2: Found Intel integrated DMA 64-bit
>>>>>> [ 12.011159] i801_smbus 0000:00:1f.4: SMBus is busy, can't use it!
>>>>>> [ 12.030168] input: ACPI0C50:00 18D1:5028 as /devices/pci0000:00/0000:00:15.2/i2c_designware.2/i2c-9/i2c-ACPI0C50:00/0018:18D1:5028.0002/input/input11
>>>>>> [ 12.030247] hid-generic 0018:18D1:5028.0002: input,hidraw1: I2C HID v1.00 Device [ACPI0C50:00 18D1:5028] on i2c-ACPI0C50:00
>>>>>> [ 12.033381] input: keyd virtual keyboard as /devices/virtual/input/input12
>>>>>> [ 12.055649] input: keyd virtual pointer as /devices/virtual/input/input13
>>>>>> [ 12.064322] spi-nor spi0.0: supply vcc not found, using dummy regulator
>>>>>> [ 12.080067] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>>>>>> [ 12.080073] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>>>>>> [ 12.080075] RAPL PMU: hw unit of domain package 2^-14 Joules
>>>>>> [ 12.080077] RAPL PMU: hw unit of domain dram 2^-14 Joules
>>>>>> [ 12.080079] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>>>>>> [ 12.080079] Creating 1 MTD partitions on "0000:00:1f.5":
>>>>>> [ 12.080081] RAPL PMU: hw unit of domain psys 2^-14 Joules
>>>>>> [ 12.080084] 0x000000000000-0x000001000000 : "BIOS"
>>>>>> [ 12.302847] iTCO_vendor_support: vendor-support=0
>>>>>> [ 12.303291] intel_rapl_common: Found RAPL domain package
>>>>>> [ 12.303295] intel_rapl_common: Found RAPL domain core
>>>>>> [ 12.303297] intel_rapl_common: Found RAPL domain uncore
>>>>>> [ 12.303299] intel_rapl_common: Found RAPL domain dram
>>>>>> [ 12.303301] intel_rapl_common: Found RAPL domain psys
>>>>>> [ 12.359803] mousedev: PS/2 mouse device common for all mice
>>>>>> [ 12.544357] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
>>>>>> [ 12.550433] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>>>>>> [ 12.654756] cros-usbpd-charger cros-usbpd-charger.7.auto: Could not get charger port count
>>>>>> [ 12.660535] ACPI: battery: new hook: cros-charge-control.6.auto
>>>>>> [ 12.748126] snd_soc_avs 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
>>>>>> [ 12.775124] intel_tcc_cooling: Programmable TCC Offset detected
>>>>>> [ 12.815699] cros-ec-dev cros-ec-dev.19.auto: CrOS Touchpad MCU detected
>>>>>> [ 12.845670] gpio gpiochip2: Detected name collision for GPIO name 'EC:I2C1_SCL'
>>>>>> [ 12.845678] gpio gpiochip2: Detected name collision for GPIO name 'EC:I2C1_SDA'
>>>>>> [ 12.845683] gpio gpiochip2: Detected name collision for GPIO name 'EC:ENTERING_RW'
>>>>>> [ 12.845686] gpio gpiochip2: Detected name collision for GPIO name 'EC:WP_L'
>>>>>> [ 12.885059] intel_rapl_common: Found RAPL domain package
>>>>>> [ 12.885064] intel_rapl_common: Found RAPL domain dram
>>>>>> [ 12.905669] cros-ec-i2c i2c-GOOG0008:00: Chrome EC device registered
>>>>>> [ 12.930053] max98927 i2c-MX98927:00: MAX98927 revisionID: 0x42
>>>>>> [ 12.935170] max98927 i2c-MX98927:01: MAX98927 revisionID: 0x42
>>>>>> [ 12.935406] rt5663 i2c-10EC5663:00: supply avdd not found, using dummy regulator
>>>>>> [ 12.935444] rt5663 i2c-10EC5663:00: supply cpvdd not found, using dummy regulator
>>>>>> [ 12.977054] snd_hda_codec_intelhdmi hdaudioB0D2: creating for HDMI 0 0
>>>>>> [ 12.977061] snd_hda_codec_intelhdmi hdaudioB0D2: skipping capture dai for HDMI 0
>>>>>> [ 12.977064] snd_hda_codec_intelhdmi hdaudioB0D2: creating for HDMI 1 1
>>>>>> [ 12.977067] snd_hda_codec_intelhdmi hdaudioB0D2: skipping capture dai for HDMI 1
>>>>>> [ 12.977070] snd_hda_codec_intelhdmi hdaudioB0D2: creating for HDMI 2 2
>>>>>> [ 12.977073] snd_hda_codec_intelhdmi hdaudioB0D2: skipping capture dai for HDMI 2
>>>>>> [ 12.978185] avs_hdaudio avs_hdaudio.25.auto: ASoC: Parent card not yet available, widget card binding deferred
>>>>>> [ 12.978296] avs_hdaudio avs_hdaudio.25.auto: avs_card_late_probe: mapping HDMI converter 1 to PCM 0 (000000001eda508f)
>>>>>> [ 12.978303] avs_hdaudio avs_hdaudio.25.auto: avs_card_late_probe: mapping HDMI converter 2 to PCM 0 (00000000d43fd9be)
>>>>>> [ 12.978308] avs_hdaudio avs_hdaudio.25.auto: avs_card_late_probe: mapping HDMI converter 3 to PCM 0 (000000001200180a)
>>>>>> [ 12.981090] avs_hdaudio avs_hdaudio.25.auto: control 3:0:0:ELD:0 is already present
>>>>>> [ 12.981097] snd_hda_codec_intelhdmi hdaudioB0D2: unable to create controls -16
>>>>>> [ 12.981100] avs_hdaudio avs_hdaudio.25.auto: ASoC error (-16): at snd_soc_card_late_probe() on AVS HDMI
>>>>>> [ 12.982389] avs_hdaudio avs_hdaudio.25.auto: probe with driver avs_hdaudio failed with error -16
>>>>>> [ 12.984174] avs_max98927 avs_max98927.22.auto: ASoC: Parent card not yet available, widget card binding deferred
>>>>>> [ 13.060994] cros-ec-activity cros-ec-activity.18.auto: Unknown activity: 2
>>>>>> [ 13.385770] Bluetooth: Core ver 2.22
>>>>>> [ 13.385794] NET: Registered PF_BLUETOOTH protocol family
>>>>>> [ 13.385796] Bluetooth: HCI device and connection manager initialized
>>>>>> [ 13.385802] Bluetooth: HCI socket layer initialized
>>>>>> [ 13.385805] Bluetooth: L2CAP socket layer initialized
>>>>>> [ 13.385811] Bluetooth: SCO socket layer initialized
>>>>>> [ 13.417832] usbcore: registered new interface driver btusb
>>>>>> [ 13.427559] Bluetooth: hci0: Legacy ROM 2.x revision 5.0 build 25 week 20 2015
>>>>>> [ 13.436179] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
>>>>>> [ 13.499567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>>>>>> [ 13.499573] Bluetooth: BNEP filters: protocol multicast
>>>>>> [ 13.499579] Bluetooth: BNEP socket layer initialized
>>>>>> [ 13.521388] mc: Linux media interface: v0.10
>>>>>> [ 13.548958] videodev: Linux video capture interface: v2.00
>>>>>> [ 13.577251] uvcvideo 1-2:1.0: Found UVC 1.00 device WebCamera (0bda:564b)
>>>>>> [ 13.581266] usbcore: registered new interface driver uvcvideo
>>>>>> [ 13.777821] Bluetooth: hci0: Intel BT fw patch 0x43 completed & activated
>>>>>> [ 13.834087] Bluetooth: MGMT ver 1.23
>>>>>> [ 13.855319] NET: Registered PF_ALG protocol family
>>>>>> [ 14.076080] usbcore: registered new interface driver cdc_ether
>>>>>> [ 14.232203] avs_rt5663 avs_rt5663.24.auto: ASoC: Parent card not yet available, widget card binding deferred
>>>>>> [ 14.233453] rt5663 i2c-10EC5663:00: sysclk < 384 x fs, disable i2s asrc
>>>>>> [ 14.233776] input: AVS I2S ALC5663 Headset Jack as /devices/platform/avs_rt5663.24.auto/sound/card2/input16
>>>>>> [ 14.243469] avs_rt5514 avs_rt5514.23.auto: ASoC: Parent card not yet available, widget card binding deferred
>>>>>> [ 14.248238] idma64 idma64.5: Found Intel integrated DMA 64-bit
>>>>>> [ 14.249329] idma64 idma64.6: Found Intel integrated DMA 64-bit
>>>>>> [ 14.303841] cdc_ncm 2-2.4:2.0: MAC-Address: __CENSORED__
>>>>>> [ 14.303850] cdc_ncm 2-2.4:2.0: setting rx_max = 16384
>>>>>> [ 14.317617] cdc_ncm 2-2.4:2.0: setting tx_max = 16384
>>>>>> [ 14.329666] cdc_ncm 2-2.4:2.0 eth0: register 'cdc_ncm' at usb-0000:00:14.0-2.4, CDC NCM (NO ZLP), __CENSORED__
>>>>>> [ 14.329829] dw-apb-uart.3: ttyS4 at MMIO 0xfe030000 (irq = 32, base_baud = 115200) is a 16550A
>>>>>> [ 14.335210] dw-apb-uart.5: ttyS5 at MMIO 0x91137000 (irq = 20, base_baud = 7500000) is a 16550A
>>>>>> [ 14.342895] usbcore: registered new interface driver cdc_ncm
>>>>>> [ 14.358054] usbcore: registered new interface driver cdc_wdm
>>>>>> [ 14.366640] usbcore: registered new interface driver cdc_mbim
>>>>>> [ 14.376015] cdc_ncm 2-2.4:2.0 enp0s20f0u2u4c2: renamed from eth0
>>>>>> [ 14.411216] input: WCOM50C1:00 2D1F:5143 as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input17
>>>>>> [ 14.411743] input: WCOM50C1:00 2D1F:5143 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input18
>>>>>> [ 14.411874] input: WCOM50C1:00 2D1F:5143 Stylus as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input19
>>>>>> [ 14.412256] input: WCOM50C1:00 2D1F:5143 UNKNOWN as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input20
>>>>>> [ 14.412392] input: WCOM50C1:00 2D1F:5143 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-6/i2c-WCOM50C1:00/0018:2D1F:5143.0001/input/input21
>>>>>> [ 14.414488] hid-multitouch 0018:2D1F:5143.0001: input,hidraw0: I2C HID v1.00 Mouse [WCOM50C1:00 2D1F:5143] on i2c-WCOM50C1:00
>>>>>> [ 14.429082] input: ACPI0C50:00 18D1:5028 as /devices/pci0000:00/0000:00:15.2/i2c_designware.2/i2c-9/i2c-ACPI0C50:00/0018:18D1:5028.0002/input/input22
>>>>>> [ 14.429885] hid-multitouch 0018:18D1:5028.0002: input,hidraw1: I2C HID v1.00 Device [ACPI0C50:00 18D1:5028] on i2c-ACPI0C50:00
>>>>>> [ 21.008293] apple 0005:05AC:0256.0003: unknown main item tag 0x0
>>>>>> [ 21.008478] input: Apple Wireless Keyboard as /devices/virtual/misc/uhid/0005:05AC:0256.0003/input/input23
>>>>>> [ 21.028636] apple 0005:05AC:0256.0003: input,hidraw2: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on __CENSORED__
>>>>>> [ 22.050334] input: MX Anywhere 3 Mouse as /devices/virtual/misc/uhid/0005:046D:B025.0004/input/input24
>>>>>> [ 22.050690] hid-generic 0005:046D:B025.0004: input,hidraw3: BLUETOOTH HID v0.15 Mouse [MX Anywhere 3] on __CENSORED__
>>>>>> [ 22.656665] input: Logitech MX Anywhere 3 as /devices/virtual/misc/uhid/0005:046D:B025.0004/input/input26
>>>>>> [ 22.657467] logitech-hidpp-device 0005:046D:B025.0004: input,hidraw3: BLUETOOTH HID v0.15 Mouse [Logitech MX Anywhere 3] on __CENSORED__
>>>>>> [ 22.690495] logitech-hidpp-device 0005:046D:B025.0004: HID++ 4.5 device connected.
>>>>>> [ 29.314294] Bluetooth: RFCOMM TTY layer initialized
>>>>>> [ 29.314306] Bluetooth: RFCOMM socket layer initialized
>>>>>> [ 29.314311] Bluetooth: RFCOMM ver 1.11
>>>>>> [ 49.334015] PM: suspend entry (deep)
>>>>>> [ 49.468714] Filesystems sync: 0.134 seconds
>>>>>> [ 49.475339] Freezing user space processes
>>>>>> [ 49.476795] Freezing user space processes completed (elapsed 0.001 seconds)
>>>>>> [ 49.476805] OOM killer disabled.
>>>>>> [ 49.476807] Freezing remaining freezable tasks
>>>>>> [ 49.478000] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>>>>>> [ 49.478021] printk: Suspending console(s) (use no_console_suspend to debug)
>>>>>> [ 50.276104] ACPI: EC: interrupt blocked
>>>>>> [ 50.295404] ACPI: PM: Preparing to enter system sleep state S3
>>>>>> [ 50.295551] ACPI: EC: event blocked
>>>>>> [ 50.295553] ACPI: EC: EC stopped
>>>>>> [ 50.295555] ACPI: PM: Saving platform NVS memory
>>>>>> [ 50.295582] Disabling non-boot CPUs ...
>>>>>> [ 50.297302] smpboot: CPU 3 is now offline
>>>>>> [ 50.300996] smpboot: CPU 2 is now offline
>>>>>> [ 50.303136] smpboot: CPU 1 is now offline
>>>>>> [ 50.306603] ACPI: PM: Low-level resume complete
>>>>>> [ 50.306657] ACPI: EC: EC started
>>>>>> [ 50.306658] ACPI: PM: Restoring platform NVS memory
>>>>>> [ 50.307382] Enabling non-boot CPUs ...
>>>>>> [ 50.307530] smpboot: Booting Node 0 Processor 1 APIC 0x2
>>>>>> [ 50.311113] CPU1 is up
>>>>>> [ 50.311141] smpboot: Booting Node 0 Processor 2 APIC 0x1
>>>>>> [ 50.312157] CPU2 is up
>>>>>> [ 50.312184] smpboot: Booting Node 0 Processor 3 APIC 0x3
>>>>>> [ 50.313070] CPU3 is up
>>>>>> [ 50.314754] ACPI: PM: Waking up from system sleep state S3
>>>>>> [ 50.315011] ACPI: EC: interrupt unblocked
>>>>>> [ 50.328827] ACPI: EC: event unblocked
>>>>>> [ 50.328910] pcieport 0000:00:1c.0: pciehp: Slot(0): Card present
>>>>>> [ 50.328914] pcieport 0000:00:1c.0: pciehp: Slot(0): Link Up
>>>>>> [ 50.454011] pci 0000:01:00.0: [8086:095a] type 00 class 0x028000 PCIe Endpoint
>>>>>> [ 50.454135] pci 0000:01:00.0: BAR 0 [mem 0x91000000-0x91001fff 64bit]
>>>>>> [ 50.454336] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>>>>>> [ 50.455122] pci 0000:01:00.0: BAR 0 [mem 0x91000000-0x91001fff 64bit]: assigned
>>>>>> [ 50.455147] pcieport 0000:00:1c.0: PCI bridge to [bus 01]
>>>>>> [ 50.455152] pcieport 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
>>>>>> [ 50.455160] pcieport 0000:00:1c.0: bridge window [mem 0x91000000-0x910fffff]
>>>>>> [ 50.455166] pcieport 0000:00:1c.0: bridge window [mem 0x27f000000-0x27f1fffff 64bit pref]
>>>>>> [ 50.579629] OOM killer enabled.
>>>>>> [ 50.579633] Restarting tasks: Starting
>>>>>> [ 50.580185] Restarting tasks: Done
>>>>>> [ 50.580236] random: crng reseeded on system resumption
>>>>>> [ 50.597372] PM: suspend exit
>>>>>> [ 50.795876] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>>>>>> [ 50.796190] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>>>>>> [ 50.796380] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
>>>>>> [ 50.797348] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
>>>>>> [ 50.797355] cfg80211: failed to load regulatory.db
>>>>>> [ 50.833621] iwlwifi 0000:01:00.0: Detected crf-id 0x0, cnv-id 0x0 wfpm id 0x0
>>>>>> [ 50.833632] iwlwifi 0000:01:00.0: PCI dev 095a/9e10, rev=0x210, rfid=0xd55555d5
>>>>>> [ 50.833636] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless-AC 7265
>>>>>> [ 50.843189] iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
>>>>>> [ 50.843194] iwlwifi 0000:01:00.0: Found debug configuration: 0
>>>>>> [ 50.843413] iwlwifi 0000:01:00.0: loaded firmware version 29.9ef079ed.0 7265D-29.ucode op_mode iwlmvm
>>>>>> [ 51.031523] pps_core: LinuxPPS API ver. 1 registered
>>>>>> [ 51.031528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>>>>>> [ 51.041714] PTP clock support registered
>>>>>> [ 51.085977] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
>>>>>> [ 51.086515] iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
>>>>>> [ 51.091081] iwlwifi 0000:01:00.0: base HW address: __CENSORED__, OTP minor version: 0x0
>>>>>> [ 51.155876] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>>>>>> [ 51.162465] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
>>>>>> [ 51.183301] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
>>>>>> [ 51.261354] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
>>>>>> [ 51.263324] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
>>>>>> [ 51.301497] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
>>>>>> [ 51.380860] iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
>>>>>> [ 51.382709] iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
>>>>>> [ 54.105239] apple 0005:05AC:0256.0005: unknown main item tag 0x0
>>>>>> [ 54.106969] input: Apple Wireless Keyboard as /devices/virtual/misc/uhid/0005:05AC:0256.0005/input/input27
>>>>>> [ 54.132208] apple 0005:05AC:0256.0005: input,hidraw2: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on __CENSORED__
>>>>>> [ 54.671095] wlp1s0: authenticate with __CENSORED__ (local address=__CENSORED__)
>>>>>> [ 54.672082] wlp1s0: send auth to __CENSORED__ (try 1/3)
>>>>>> [ 54.793409] wlp1s0: authenticate with __CENSORED__ (local address=__CENSORED__)
>>>>>> [ 54.793426] wlp1s0: send auth to __CENSORED__ (try 1/3)
>>>>>> [ 54.828297] wlp1s0: authenticated
>>>>>> [ 54.830857] wlp1s0: associate with __CENSORED__ (try 1/3)
>>>>>> [ 54.835788] wlp1s0: RX AssocResp from __CENSORED__ (capab=0x1931 status=0 aid=12)
>>>>>> [ 54.838810] wlp1s0: associated
>>>>>> [ 54.865853] wlp1s0: Limiting TX power to 30 (30 - 0) dBm as advertised by __CENSORED__
>>>>>> [ 59.291277] input: Logitech MX Anywhere 3 as /devices/virtual/misc/uhid/0005:046D:B025.0006/input/input28
>>>>>> [ 59.292194] logitech-hidpp-device 0005:046D:B025.0006: input,hidraw3: BLUETOOTH HID v0.15 Mouse [Logitech MX Anywhere 3] on __CENSORED__
>>>>>> [ 59.346946] logitech-hidpp-device 0005:046D:B025.0006: HID++ 4.5 device connected.
>>>>>> [ 63.574660] wlp1s0: deauthenticating from __CENSORED__ by local choice (Reason: 3=DEAUTH_LEAVING)
>>>>>> [ 63.992301] wlp1s0: authenticate with __CENSORED__ (local address=__CENSORED__)
>>>>>> [ 63.993318] wlp1s0: send auth to __CENSORED__ (try 1/3)
>>>>>> [ 64.106845] wlp1s0: authenticate with __CENSORED__ (local address=__CENSORED__)
>>>>>> [ 64.106855] wlp1s0: send auth to __CENSORED__ (try 1/3)
>>>>>> [ 64.246203] wlp1s0: authenticated
>>>>>> [ 64.247826] wlp1s0: associate with __CENSORED__ (try 1/3)
>>>>>> [ 64.249640] wlp1s0: RX AssocResp from __CENSORED__ (capab=0x1811 status=0 aid=15)
>>>>>> [ 64.252431] wlp1s0: associated
>>>>>> [ 68.576098] warning: `ThreadPoolForeg' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
>>>>>> [ 637.445699] apple 0005:05AC:0256.0007: unknown main item tag 0x0
>>>>>> [ 637.446971] input: Apple Wireless Keyboard as /devices/virtual/misc/uhid/0005:05AC:0256.0007/input/input29
>>>>>> [ 637.473496] apple 0005:05AC:0256.0007: input,hidraw2: BLUETOOTH HID v0.50 Keyboard [Apple Wireless Keyboard] on __CENSORED__
>>>>>> [ 1411.883331] iio iio:device1: Unknown activity: 2
>>>>>>
>>>>>> I cannot test reverting that change, since that generates conflicts I am
>>>>>> not sure how to resolve.
>>>>>>
>>>>>> Any help towards fixing this would be very much appreciated.
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> #regzbot introduced: 4d4c10f763
>>>>>>
>>>>>
>>
next prev parent reply other threads:[~2025-10-20 0:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-18 22:01 [REGRESSION] Intel Wireless adapter is not detected until suspending to RAM and resuming Adrià Vilanova Martínez
2025-10-19 5:12 ` Mario Limonciello
2025-10-19 9:35 ` Adrià Vilanova Martínez
2025-10-19 11:37 ` Adrià Vilanova Martínez
2025-10-19 18:22 ` Mario Limonciello
2025-10-19 23:08 ` Adrià Vilanova Martínez
2025-10-20 0:25 ` Mario Limonciello [this message]
2025-10-20 12:56 ` Adrià Vilanova Martínez
2025-10-20 16:37 ` Mario Limonciello (AMD) (kernel.org)
2025-10-20 17:38 ` Mario Limonciello (AMD) (kernel.org)
2025-10-20 22:33 ` Adrià Vilanova Martínez
2025-10-20 23:25 ` Bjorn Helgaas
2025-10-21 7:37 ` Lukas Wunner
2025-10-21 8:30 ` Lukas Wunner
2025-10-21 13:35 ` Adrià Vilanova Martínez
2025-10-22 15:30 ` Lukas Wunner
2025-10-22 16:19 ` Lukas Wunner
2025-10-27 16:36 ` Adrià Vilanova Martínez
2025-10-28 14:30 ` Adrià Vilanova Martínez
2025-10-27 15:49 ` Adrià Vilanova Martínez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a08c71e2-18ca-491b-8982-47214a35445b@kernel.org \
--to=superm1@kernel.org \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=me@avm99963.com \
--cc=regressions@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox