linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Niklas Cassel <cassel@kernel.org>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
	linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, wilfred.mallawa@wdc.com,
	Lukas Wunner <lukas@wunner.de>
Subject: Re: [PATCH 1/2] PCI: Save and restore root port config space in pcibios_reset_secondary_bus()
Date: Sat, 24 May 2025 22:54:21 +0200	[thread overview]
Message-ID: <aDIx_TaNXv__uO14@ryzen> (raw)
In-Reply-To: <20250524185304.26698-2-manivannan.sadhasivam@linaro.org>

On Sun, May 25, 2025 at 12:23:03AM +0530, Manivannan Sadhasivam wrote:
> host_bridge::reset_slot() is supposed to reset the PCI root port/slot. Once
> that happens, the config space content would be lost. This was reported by
> Niklas on the dw-rockchip based platform where the MPS setting of the root
> port was lost after the host_bridge::reset_slot() callback. Hence, save the
> config space before calling the host_bridge::reset_slot() callback and
> restore it afterwards.
> 
> While at it, make sure that the callback is only called for root ports by
> checking if the bridge is behind the root bus.
> 
> Fixes: d5c1e1c25b37 ("PCI/ERR: Add support for resetting the slots in a platform specific way")
> Reported-by: Niklas Cassel <cassel@kernel.org>
> Closes: https://lore.kernel.org/linux-pci/aC9OrPAfpzB_A4K2@ryzen
> Suggested-by: Lukas Wunner <lukas@wunner.de>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/pci.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 4d396bbab4a8..6d6e9ce2bbcc 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4985,10 +4985,19 @@ void __weak pcibios_reset_secondary_bus(struct pci_dev *dev)
>  	struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
>  	int ret;
>  
> -	if (host->reset_slot) {
> +	if (pci_is_root_bus(dev->bus) && host->reset_slot) {
> +		/*
> +		 * Save the config space of the root port before doing the
> +		 * reset, since the state could be lost. The device state
> +		 * should've been saved by the caller.
> +		 */
> +		pci_save_state(dev);
>  		ret = host->reset_slot(host, dev);
>  		if (ret)
>  			pci_err(dev, "failed to reset slot: %d\n", ret);
> +		else
> +			/* Now restore it on success */
> +			pci_restore_state(dev);
>  
>  		return;
>  	}
> -- 
> 2.43.0
> 

Looks good to me:
Reviewed-by: Niklas Cassel <cassel@kernel.org>

  reply	other threads:[~2025-05-24 20:54 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-24 18:53 [PATCH 0/2] PCI: Slot reset fixes Manivannan Sadhasivam
2025-05-24 18:53 ` [PATCH 1/2] PCI: Save and restore root port config space in pcibios_reset_secondary_bus() Manivannan Sadhasivam
2025-05-24 20:54   ` Niklas Cassel [this message]
2025-05-25  2:36   ` Wilfred Mallawa
2025-05-25  7:22   ` Lukas Wunner
2025-05-25  7:58     ` Manivannan Sadhasivam
2025-05-26  6:54       ` Lukas Wunner
2025-05-26 11:16         ` Manivannan Sadhasivam
2025-05-24 18:53 ` [PATCH 2/2] PCI: Rename host_bridge::reset_slot() to host_bridge::reset_root_port() Manivannan Sadhasivam
2025-05-24 20:57   ` Niklas Cassel
2025-05-25  2:38     ` Wilfred Mallawa
2025-05-25  8:00     ` Manivannan Sadhasivam
2025-05-24 21:51   ` kernel test robot
2025-05-25  7:26   ` Lukas Wunner
2025-05-26  0:47 ` [PATCH 0/2] PCI: Slot reset fixes Wilfred Mallawa
2025-05-26  5:53 ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aDIx_TaNXv__uO14@ryzen \
    --to=cassel@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=kw@linux.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=lukas@wunner.de \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=wilfred.mallawa@wdc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).