Re: [PATCH] PCI: pcie-altera: Set MPS to MPSS on Agilex 7 Root Ports

[Niklas Cassel <cassel@kernel.org>]

Hello Mahesh,

On Mon, Nov 10, 2025 at 09:00:45AM -0800, Mahesh Vaidya wrote:
> The Altera Agilex 7 Root Port (RP) defaults its Device Control
> (DEVCTL) register's MPS setting to 128 bytes upon power-on.
> When the kernel's PCIe core enumerates the bus (using the default
> PCIE_BUS_DEFAULT policy), it observes this 128-byte current setting
> and limits all downstream Endpoints to 128 bytes.
> This occurs even if both the RP and the Endpoint support a higher MPSS
> (e.g., 256 or 512 bytes), resulting in sub-optimal DMA performance.
> 
> This patch fixes the issue by reading the RP's actual MPSS from its
> Device Capability (DEVCAP) register and writing this value into the
> DEVCTL register, overriding the 128-byte default value.
> As this fix is called in driver's probe function before the PCI bus
> is scanned, it ensures that when the kernel's PCI core enumerates the
> downstream port, it reads the correct, maximum-supported MPS from the
> RP's DEVCTL and can negotiate the optimal MPS for the Endpoint.

Could you please review and test this series from Hans:
https://lore.kernel.org/linux-pci/20251104165125.174168-1-18255117159@163.com/

It tries to address the exact same problem that you are describing here.


Kind regards,
Niklas