Re: [RFC 0/9] PCI: introduce the concept of power sequencing of PCIe devices

[Neil Armstrong <neil.armstrong@linaro.org>]

Hi,

On 04/01/2024 14:01, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> During last year's Linux Plumbers we had several discussions centered
> around the need to power-on PCI devices before they can be detected on
> the bus.
> 
> The consensus during the conference was that we need to introduce a
> class of "PCI slot drivers" that would handle the power-sequencing.
> 
> After some additional brain-storming with Manivannan and the realization
> that the DT maintainers won't like adding any "fake" nodes not
> representing actual devices, we decided to reuse the existing
> infrastructure provided by the PCIe port drivers.
> 
> The general idea is to instantiate platform devices for child nodes of
> the PCIe port DT node. For those nodes for which a power-sequencing
> driver exists, we bind it and let it probe. The driver then triggers a
> rescan of the PCI bus with the aim of detecting the now powered-on
> device. The device will consume the same DT node as the platform,
> power-sequencing device. We use device links to make the latter become
> the parent of the former.
> 
> The main advantage of this approach is not modifying the existing DT in
> any way and especially not adding any "fake" platform devices.

I've successfully tested this serie for the WCN7850 Wifi/BT combo onboard chip
present on the SM8550-QRD and SM8650-QRD boards and it works just fine.

Here's a branch with the wcn7850 vreg table added to the pwrseq driver,
and the DT changes:
https://git.codelinaro.org/neil.armstrong/linux/-/commits/topic/sm8x50/wcn7850-wifi-pwrseq/?ref_type=heads

Thanks,
Neil

> 
> Bartosz Golaszewski (9):
>    arm64: dts: qcom: sm8250: describe the PCIe port
>    arm64: dts: qcom: qrb5165-rb5: describe the WLAN module of QCA6390
>    PCI/portdrv: create platform devices for child OF nodes
>    PCI: hold the rescan mutex when scanning for the first time
>    PCI/pwrseq: add pwrseq core code
>    dt-bindings: vendor-prefixes: add a PCI prefix for Qualcomm Atheros
>    dt-bindings: wireless: ath11k: describe QCA6390
>    PCI/pwrseq: add a pwrseq driver for QCA6390
>    arm64: defconfig: enable the PCIe power sequencing for QCA6390
> 
>   .../net/wireless/qcom,ath11k-pci.yaml         |  14 ++
>   .../devicetree/bindings/vendor-prefixes.yaml  |   1 +
>   arch/arm64/boot/dts/qcom/qrb5165-rb5.dts      |  24 +++
>   arch/arm64/boot/dts/qcom/sm8250.dtsi          |  10 +
>   arch/arm64/configs/defconfig                  |   2 +
>   drivers/pci/pcie/Kconfig                      |   2 +
>   drivers/pci/pcie/Makefile                     |   2 +
>   drivers/pci/pcie/portdrv.c                    |   3 +-
>   drivers/pci/pcie/pwrseq/Kconfig               |  19 ++
>   drivers/pci/pcie/pwrseq/Makefile              |   4 +
>   drivers/pci/pcie/pwrseq/pcie-pwrseq-qca6390.c | 197 ++++++++++++++++++
>   drivers/pci/pcie/pwrseq/pwrseq.c              |  83 ++++++++
>   drivers/pci/probe.c                           |   2 +
>   include/linux/pcie-pwrseq.h                   |  24 +++
>   14 files changed, 386 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/pci/pcie/pwrseq/Kconfig
>   create mode 100644 drivers/pci/pcie/pwrseq/Makefile
>   create mode 100644 drivers/pci/pcie/pwrseq/pcie-pwrseq-qca6390.c
>   create mode 100644 drivers/pci/pcie/pwrseq/pwrseq.c
>   create mode 100644 include/linux/pcie-pwrseq.h
>