linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: poza@codeaurora.org
To: Tyler Baicar <tbaicar@codeaurora.org>
Cc: helgaas@kernel.org, bhelgaas@google.com,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pci-owner@vger.kernel.org
Subject: Re: [PATCH] PCI/AER: Adopt lspci naming convention for AER prints
Date: Tue, 26 Jun 2018 22:38:02 +0530	[thread overview]
Message-ID: <ac1a8fa22a6f9c53220fc6972c5e931b@codeaurora.org> (raw)
In-Reply-To: <1530027855-19709-1-git-send-email-tbaicar@codeaurora.org>

On 2018-06-26 21:14, Tyler Baicar wrote:
> lspci uses abbreviated naming for AER error strings. Adopt the
> same naming convention for the AER printing so they match.
> 
> Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
> ---
>  drivers/pci/pcie/aer.c | 46 
> +++++++++++++++++++++++-----------------------
>  1 file changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index a2e8838..08a5219 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -459,22 +459,22 @@ int pci_aer_init(struct pci_dev *dev)
>  };
> 
>  static const char *aer_correctable_error_string[] = {
> -	"Receiver Error",		/* Bit Position 0	*/
> +	"RxErr",			/* Bit Position 0	*/
>  	NULL,
>  	NULL,
>  	NULL,
>  	NULL,
>  	NULL,
> -	"Bad TLP",			/* Bit Position 6	*/
> -	"Bad DLLP",			/* Bit Position 7	*/
> -	"RELAY_NUM Rollover",		/* Bit Position 8	*/
> +	"BadTLP",			/* Bit Position 6	*/
> +	"BadDLLP",			/* Bit Position 7	*/
> +	"Rollover",			/* Bit Position 8	*/
>  	NULL,
>  	NULL,
>  	NULL,
> -	"Replay Timer Timeout",		/* Bit Position 12	*/
> -	"Advisory Non-Fatal",		/* Bit Position 13	*/
> -	"Corrected Internal Error",	/* Bit Position 14	*/
> -	"Header Log Overflow",		/* Bit Position 15	*/
> +	"Timeout",			/* Bit Position 12	*/
> +	"NonFatalErr",			/* Bit Position 13	*/
> +	"CorrIntErr",			/* Bit Position 14	*/
> +	"HeaderOF",			/* Bit Position 15	*/
>  };
> 
>  static const char *aer_uncorrectable_error_string[] = {
> @@ -482,28 +482,28 @@ int pci_aer_init(struct pci_dev *dev)
>  	NULL,
>  	NULL,
>  	NULL,
> -	"Data Link Protocol",		/* Bit Position 4	*/
> -	"Surprise Down Error",		/* Bit Position 5	*/
> +	"DLP",				/* Bit Position 4	*/
> +	"SDES",				/* Bit Position 5	*/
>  	NULL,
>  	NULL,
>  	NULL,
>  	NULL,
>  	NULL,
>  	NULL,
> -	"Poisoned TLP",			/* Bit Position 12	*/
> -	"Flow Control Protocol",	/* Bit Position 13	*/
> -	"Completion Timeout",		/* Bit Position 14	*/
> -	"Completer Abort",		/* Bit Position 15	*/
> -	"Unexpected Completion",	/* Bit Position 16	*/
> -	"Receiver Overflow",		/* Bit Position 17	*/
> -	"Malformed TLP",		/* Bit Position 18	*/
> +	"TLP",				/* Bit Position 12	*/
> +	"FCP",				/* Bit Position 13	*/
> +	"CmpltTO",			/* Bit Position 14	*/
> +	"CmpltAbrt",			/* Bit Position 15	*/
> +	"UnxCmplt",			/* Bit Position 16	*/
> +	"RxOF",				/* Bit Position 17	*/
> +	"MalfTLP",			/* Bit Position 18	*/
>  	"ECRC",				/* Bit Position 19	*/
> -	"Unsupported Request",		/* Bit Position 20	*/
> -	"ACS Violation",		/* Bit Position 21	*/
> -	"Uncorrectable Internal Error",	/* Bit Position 22	*/
> -	"MC Blocked TLP",		/* Bit Position 23	*/
> -	"AtomicOp Egress Blocked",	/* Bit Position 24	*/
> -	"TLP Prefix Blocked Error",	/* Bit Position 25	*/
> +	"UnsupReq",			/* Bit Position 20	*/
> +	"ACSViol",			/* Bit Position 21	*/
> +	"UncorrIntErr",			/* Bit Position 22	*/
> +	"BlockedTLP",			/* Bit Position 23	*/
> +	"AtomicOpBlocked",		/* Bit Position 24	*/
> +	"TLPBlockedErr",		/* Bit Position 25	*/
>  };
> 
>  static const char *aer_agent_string[] = {


Reviewed-by: Oza Pawandeep <poza@codeaurora.org>

  reply	other threads:[~2018-06-26 17:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-26 15:44 [PATCH] PCI/AER: Adopt lspci naming convention for AER prints Tyler Baicar
2018-06-26 17:08 ` poza [this message]
2018-06-30 20:03 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ac1a8fa22a6f9c53220fc6972c5e931b@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=helgaas@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci-owner@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=tbaicar@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).