From: Frank Li <Frank.li@nxp.com>
To: Nathan Lynch <nathan.lynch@amd.com>
Cc: Vinod Koul <vkoul@kernel.org>, Wei Huang <wei.huang2@amd.com>,
Mario Limonciello <mario.limonciello@amd.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Stephen Bates <Stephen.Bates@amd.com>,
PradeepVineshReddy.Kodamati@amd.com, John.Kariuki@amd.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
dmaengine@vger.kernel.org
Subject: Re: [PATCH 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers
Date: Mon, 20 Apr 2026 04:40:59 -0400 [thread overview]
Message-ID: <aeXmm7W6SD4YGDXQ@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260410-sdxi-base-v1-16-1d184cb5c60a@amd.com>
On Fri, Apr 10, 2026 at 08:07:26AM -0500, Nathan Lynch wrote:
> Introduce small helper functions for manipulating certain common
> properties of descriptors after their operation-specific encoding has
> been performed but before they are submitted.
>
> sdxi_desc_set_csb() associates an optional completion status block
> with a descriptor.
>
> sdxi_desc_set_fence() forces retirement of any prior descriptors in
> the ring before the target descriptor is executed. This is useful for
> interrupt descriptors that signal the completion of an operation.
>
> sdxi_desc_set_sequential() ensures that all writes from prior
> descriptor operations in the same context are made globally visible
> prior to making writes from the target descriptor globally visible.
>
> sdxi_desc_make_valid() sets the descriptor validity bit, transferring
> ownership of the descriptor from software to the SDXI
> implementation. (The implementation is allowed to execute the
> descriptor at this point, but the caller is still obligated to push
> the doorbell to ensure execution occurs.)
>
> Each of the preceding functions will warn if invoked on a descriptor
> that has already been released to the SDXI implementation (i.e. had
> its validity bit set).
>
> Co-developed-by: Wei Huang <wei.huang2@amd.com>
> Signed-off-by: Wei Huang <wei.huang2@amd.com>
> Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/dma/sdxi/descriptor.h | 64 +++++++++++++++++++++++++++++++++++++++++++
> drivers/dma/sdxi/hw.h | 9 ++++++
> 2 files changed, 73 insertions(+)
>
> diff --git a/drivers/dma/sdxi/descriptor.h b/drivers/dma/sdxi/descriptor.h
> new file mode 100644
> index 000000000000..c0f01b1be726
> --- /dev/null
> +++ b/drivers/dma/sdxi/descriptor.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef DMA_SDXI_DESCRIPTOR_H
> +#define DMA_SDXI_DESCRIPTOR_H
> +
> +/*
> + * Facilities for encoding SDXI descriptors.
> + *
> + * Copyright Advanced Micro Devices, Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/ratelimit.h>
> +#include <linux/types.h>
> +#include <asm/byteorder.h>
> +
> +#include "hw.h"
> +
> +static inline void sdxi_desc_vl_expect(const struct sdxi_desc *desc, bool expected)
> +{
> + u8 vl = FIELD_GET(SDXI_DSC_VL, le32_to_cpu(desc->opcode));
> +
> + WARN_RATELIMIT(vl != expected, "expected vl=%u but got %u\n", expected, vl);
> +}
> +
> +static inline void sdxi_desc_set_csb(struct sdxi_desc *desc, dma_addr_t addr)
> +{
> + sdxi_desc_vl_expect(desc, 0);
> + desc->csb_ptr = cpu_to_le64(FIELD_PREP(SDXI_DSC_CSB_PTR, addr >> 5));
> +}
> +
> +static inline void sdxi_desc_make_valid(struct sdxi_desc *desc)
> +{
> + u32 opcode = le32_to_cpu(desc->opcode);
> +
> + sdxi_desc_vl_expect(desc, 0);
> + FIELD_MODIFY(SDXI_DSC_VL, &opcode, 1);
> + /*
> + * Once vl is set, no more modifications to the descriptor
> + * payload are allowed. Ensure the vl update is ordered after
> + * all other initialization of the descriptor.
> + */
> + dma_wmb();
> + WRITE_ONCE(desc->opcode, cpu_to_le32(opcode));
> +}
> +
> +static inline void sdxi_desc_set_fence(struct sdxi_desc *desc)
> +{
> + u32 opcode = le32_to_cpu(desc->opcode);
> +
> + sdxi_desc_vl_expect(desc, 0);
> + FIELD_MODIFY(SDXI_DSC_FE, &opcode, 1);
> + desc->opcode = cpu_to_le32(opcode);
> +}
> +
> +static inline void sdxi_desc_set_sequential(struct sdxi_desc *desc)
> +{
> + u32 opcode = le32_to_cpu(desc->opcode);
> +
> + sdxi_desc_vl_expect(desc, 0);
> + FIELD_MODIFY(SDXI_DSC_SE, &opcode, 1);
> + desc->opcode = cpu_to_le32(opcode);
> +}
> +
> +#endif /* DMA_SDXI_DESCRIPTOR_H */
> diff --git a/drivers/dma/sdxi/hw.h b/drivers/dma/sdxi/hw.h
> index 46424376f26f..cb1bed2f83f2 100644
> --- a/drivers/dma/sdxi/hw.h
> +++ b/drivers/dma/sdxi/hw.h
> @@ -140,6 +140,15 @@ struct sdxi_desc {
> __u8 operation[52];
> __le64 csb_ptr;
> );
> +
> +/* For opcode field */
> +#define SDXI_DSC_VL BIT(0)
> +#define SDXI_DSC_SE BIT(1)
> +#define SDXI_DSC_FE BIT(2)
> +
> +/* For csb_ptr field */
> +#define SDXI_DSC_CSB_PTR GENMASK_ULL(63, 5)
> +
> };
> } __packed;
> static_assert(sizeof(struct sdxi_desc) == 64);
>
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-04-20 8:41 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-10 13:07 [PATCH 00/23] dmaengine: Smart Data Accelerator Interface (SDXI) basic support Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 01/23] PCI: Add SNIA SDXI accelerator sub-class Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 02/23] MAINTAINERS: Add entry for SDXI driver Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 03/23] dmaengine: sdxi: Add PCI initialization Nathan Lynch via B4 Relay
2026-04-20 6:36 ` Frank Li
2026-04-20 15:29 ` Lynch, Nathan
2026-04-10 13:07 ` [PATCH 04/23] dmaengine: sdxi: Feature discovery and initial configuration Nathan Lynch via B4 Relay
2026-04-20 6:51 ` Frank Li
2026-04-20 19:31 ` Lynch, Nathan
2026-04-10 13:07 ` [PATCH 05/23] dmaengine: sdxi: Configure context tables Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 06/23] dmaengine: sdxi: Allocate DMA pools Nathan Lynch via B4 Relay
2026-04-20 7:03 ` Frank Li
2026-04-20 22:16 ` Lynch, Nathan
2026-04-10 13:07 ` [PATCH 07/23] dmaengine: sdxi: Allocate administrative context Nathan Lynch via B4 Relay
2026-04-20 7:11 ` Frank Li
2026-04-10 13:07 ` [PATCH 08/23] dmaengine: sdxi: Install " Nathan Lynch via B4 Relay
2026-04-20 7:16 ` Frank Li
2026-04-10 13:07 ` [PATCH 09/23] dmaengine: sdxi: Start functions on probe, stop on remove Nathan Lynch via B4 Relay
2026-04-20 7:18 ` Frank Li
2026-04-10 13:07 ` [PATCH 10/23] dmaengine: sdxi: Complete administrative context jump start Nathan Lynch via B4 Relay
2026-04-20 7:33 ` Frank Li
2026-04-10 13:07 ` [PATCH 11/23] dmaengine: sdxi: Add client context alloc and release APIs Nathan Lynch via B4 Relay
2026-04-20 8:19 ` Frank Li
2026-04-10 13:07 ` [PATCH 12/23] dmaengine: sdxi: Add descriptor ring management Nathan Lynch via B4 Relay
2026-04-20 8:32 ` Frank Li
2026-04-20 22:42 ` Lynch, Nathan
2026-04-10 13:07 ` [PATCH 13/23] dmaengine: sdxi: Add unit tests for descriptor ring reservations Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 14/23] dmaengine: sdxi: Attach descriptor ring state to contexts Nathan Lynch via B4 Relay
2026-04-20 8:34 ` Frank Li
2026-04-10 13:07 ` [PATCH 15/23] dmaengine: sdxi: Per-context access key (AKey) table entry allocator Nathan Lynch via B4 Relay
2026-04-20 8:39 ` Frank Li
2026-04-10 13:07 ` [PATCH 16/23] dmaengine: sdxi: Generic descriptor manipulation helpers Nathan Lynch via B4 Relay
2026-04-20 8:40 ` Frank Li [this message]
2026-04-10 13:07 ` [PATCH 17/23] dmaengine: sdxi: Add completion status block API Nathan Lynch via B4 Relay
2026-04-20 8:44 ` Frank Li
2026-04-10 13:07 ` [PATCH 18/23] dmaengine: sdxi: Encode context start, stop, and sync descriptors Nathan Lynch via B4 Relay
2026-04-20 8:48 ` Frank Li
2026-04-10 13:07 ` [PATCH 19/23] dmaengine: sdxi: Provide context start and stop APIs Nathan Lynch via B4 Relay
2026-04-20 8:50 ` Frank Li
2026-04-21 19:54 ` Lynch, Nathan
2026-04-10 13:07 ` [PATCH 20/23] dmaengine: sdxi: Encode nop, copy, and interrupt descriptors Nathan Lynch via B4 Relay
2026-04-20 8:52 ` Frank Li
2026-04-10 13:07 ` [PATCH 21/23] dmaengine: sdxi: Add unit tests for descriptor encoding Nathan Lynch via B4 Relay
2026-04-10 13:07 ` [PATCH 22/23] dmaengine: sdxi: MSI/MSI-X vector allocation and mapping Nathan Lynch via B4 Relay
2026-04-20 8:54 ` Frank Li
2026-04-10 13:07 ` [PATCH 23/23] dmaengine: sdxi: Add DMA engine provider Nathan Lynch via B4 Relay
2026-04-20 9:08 ` Frank Li
2026-04-21 20:04 ` Lynch, Nathan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aeXmm7W6SD4YGDXQ@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=John.Kariuki@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Stephen.Bates@amd.com \
--cc=bhelgaas@google.com \
--cc=dmaengine@vger.kernel.org \
--cc=jonathan.cameron@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=nathan.lynch@amd.com \
--cc=vkoul@kernel.org \
--cc=wei.huang2@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox