linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Ott <sebott@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	linux-pci@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Michal Simek <monstr@monstr.eu>,
	Paul Mackerras <paulus@samba.org>
Subject: Re: [Resend] pcibios_add_platform_entries usage
Date: Fri, 18 Apr 2014 12:10:34 +0200 (CEST)	[thread overview]
Message-ID: <alpine.LFD.2.11.1404181154450.1609@denkbrett> (raw)
In-Reply-To: <1397768575.32730.70.camel@pasglop>

[-- Attachment #1: Type: TEXT/PLAIN, Size: 4510 bytes --]

On Fri, 18 Apr 2014, Benjamin Herrenschmidt wrote:
> On Thu, 2014-04-17 at 19:46 +0200, Sebastian Ott wrote:
> 
> > pci: move open fabric devspec attribute to pci common code
> > 
> > Move the devspec OF attribute to pci common code's set of device
> > attributes since it's not architecture dependent.
> > As a side effect microblaze and powerpc no longer need to use
> > pcibios_add_platform_entries.
> > 
> > Link: https://lkml.kernel.org/r/alpine.LFD.2.11.1404141101500.1529@denkbrett
> > Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
> 
> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> 
> (Pending you've compile tested it on powerpc, I'm on vacation and
> haven't done it :)

I did:
make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2- g5_defconfig
make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2-

and failed with:
  CC      arch/powerpc/lib/xor_vmx.o
In file included from include/linux/list.h:4,
                 from include/linux/preempt.h:10,
                 from arch/powerpc/lib/xor_vmx.c:22:
include/linux/types.h:29: error: both ‘unsigned’ and ‘_Bool’ in declaration specifiers
cc1: warnings being treated as errors
include/linux/types.h:29: error: useless type name in empty declaration



make ARCH=powerpc CROSS_COMPILE=powerpc64-4.3.2- arch/powerpc/kernel/ drivers/pci/

worked just fine.

Regards,
Sebastian

> 
> > ---
> >  arch/microblaze/pci/pci-common.c |   20 --------------------
> >  arch/powerpc/kernel/pci-common.c |   20 --------------------
> >  drivers/pci/pci-sysfs.c          |   17 +++++++++++++++++
> >  3 files changed, 17 insertions(+), 40 deletions(-)
> > 
> > --- a/arch/microblaze/pci/pci-common.c
> > +++ b/arch/microblaze/pci/pci-common.c
> > @@ -168,26 +168,6 @@ struct pci_controller *pci_find_hose_for
> >  	return NULL;
> >  }
> >  
> > -static ssize_t pci_show_devspec(struct device *dev,
> > -		struct device_attribute *attr, char *buf)
> > -{
> > -	struct pci_dev *pdev;
> > -	struct device_node *np;
> > -
> > -	pdev = to_pci_dev(dev);
> > -	np = pci_device_to_OF_node(pdev);
> > -	if (np == NULL || np->full_name == NULL)
> > -		return 0;
> > -	return sprintf(buf, "%s", np->full_name);
> > -}
> > -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
> > -
> > -/* Add sysfs properties */
> > -int pcibios_add_platform_entries(struct pci_dev *pdev)
> > -{
> > -	return device_create_file(&pdev->dev, &dev_attr_devspec);
> > -}
> > -
> >  void pcibios_set_master(struct pci_dev *dev)
> >  {
> >  	/* No special bus mastering setup handling */
> > --- a/arch/powerpc/kernel/pci-common.c
> > +++ b/arch/powerpc/kernel/pci-common.c
> > @@ -201,26 +201,6 @@ struct pci_controller* pci_find_hose_for
> >  	return NULL;
> >  }
> >  
> > -static ssize_t pci_show_devspec(struct device *dev,
> > -		struct device_attribute *attr, char *buf)
> > -{
> > -	struct pci_dev *pdev;
> > -	struct device_node *np;
> > -
> > -	pdev = to_pci_dev (dev);
> > -	np = pci_device_to_OF_node(pdev);
> > -	if (np == NULL || np->full_name == NULL)
> > -		return 0;
> > -	return sprintf(buf, "%s", np->full_name);
> > -}
> > -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
> > -
> > -/* Add sysfs properties */
> > -int pcibios_add_platform_entries(struct pci_dev *pdev)
> > -{
> > -	return device_create_file(&pdev->dev, &dev_attr_devspec);
> > -}
> > -
> >  /*
> >   * Reads the interrupt pin to determine if interrupt is use by card.
> >   * If the interrupt is used, then gets the interrupt line from the
> > --- a/drivers/pci/pci-sysfs.c
> > +++ b/drivers/pci/pci-sysfs.c
> > @@ -416,6 +416,20 @@ static ssize_t d3cold_allowed_show(struc
> >  static DEVICE_ATTR_RW(d3cold_allowed);
> >  #endif
> >  
> > +#ifdef CONFIG_OF
> > +static ssize_t devspec_show(struct device *dev,
> > +			    struct device_attribute *attr, char *buf)
> > +{
> > +	struct pci_dev *pdev = to_pci_dev(dev);
> > +	struct device_node *np = pci_device_to_OF_node(pdev);
> > +
> > +	if (np == NULL || np->full_name == NULL)
> > +		return 0;
> > +	return sprintf(buf, "%s", np->full_name);
> > +}
> > +static DEVICE_ATTR_RO(devspec);
> > +#endif
> > +
> >  #ifdef CONFIG_PCI_IOV
> >  static ssize_t sriov_totalvfs_show(struct device *dev,
> >  				   struct device_attribute *attr,
> > @@ -521,6 +535,9 @@ static struct attribute *pci_dev_attrs[]
> >  #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
> >  	&dev_attr_d3cold_allowed.attr,
> >  #endif
> > +#ifdef CONFIG_OF
> > +	&dev_attr_devspec.attr,
> > +#endif
> >  	NULL,
> >  };
> >  
> 
> 
> 

  reply	other threads:[~2014-04-18 10:10 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-28 18:41 pcibios_add_platform_entries usage Sebastian Ott
2014-04-14  9:03 ` [Resend] " Sebastian Ott
2014-04-14 17:35   ` Bjorn Helgaas
2014-04-14 18:07     ` Sebastian Ott
2014-04-17 17:46       ` Sebastian Ott
2014-04-17 21:02         ` Benjamin Herrenschmidt
2014-04-18 10:10           ` Sebastian Ott [this message]
2014-04-18 21:31             ` Benjamin Herrenschmidt
2014-04-22  8:26               ` Sebastian Ott
2014-04-23  6:48                 ` Michal Simek
2014-04-23  9:00                   ` Sebastian Ott
2014-04-29 23:30         ` Bjorn Helgaas
2014-04-30 14:40           ` Sebastian Ott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.11.1404181154450.1609@denkbrett \
    --to=sebott@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=monstr@monstr.eu \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).