From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: FUKAUMI Naoki <naoki@radxa.com>
Cc: Manivannan Sadhasivam <mani@kernel.org>,
linux-rockchip@lists.infradead.org, linux-pci@vger.kernel.org
Subject: Re: ROCK 5B/5B+ RTL8852BE probe failure on v6.18-rc
Date: Tue, 21 Oct 2025 15:19:39 +0300 (EEST) [thread overview]
Message-ID: <b7e058ab-a5bf-1e71-850f-03e99f274e77@linux.intel.com> (raw)
In-Reply-To: <3BA1DC4878E9DC7E+85e7ef2c-a762-4c12-8955-64212bc192da@radxa.com>
On Tue, 21 Oct 2025, FUKAUMI Naoki wrote:
> Hi Manivannan,
>
> Thank you for your reply.
>
> On 10/21/25 20:02, Manivannan Sadhasivam wrote:
> > On Tue, Oct 21, 2025 at 07:12:21PM +0900, FUKAUMI Naoki wrote:
> > > Hi,
> > >
> > > I've observed an issue where the RTL8852BE fails to probe on the ROCK 5B
> > > and
> > > ROCK 5B+ using Linux v6.18-rc.
> > >
> > > [ 7.719288] rtw89_8852be 0002:21:00.0: loaded firmware
> > > rtw89/rtw8852b_fw-1.bin
> > > [ 7.720192] rtw89_8852be 0002:21:00.0: enabling device (0000 -> 0003)
> > > [ 7.728596] rtw89_8852be 0002:21:00.0: Firmware version 0.29.29.5
> > > (da87cccd), cmd version 0, type 5
> > > [ 7.729407] rtw89_8852be 0002:21:00.0: Firmware version 0.29.29.5
> > > (da87cccd), cmd version 0, type 3
> > > [ 11.420623] rtw89_8852be 0002:21:00.0: failed to dump efuse physical
> > > map
> > > [ 11.422859] rtw89_8852be 0002:21:00.0: failed to setup chip information
> > > [ 11.425273] rtw89_8852be 0002:21:00.0: probe with driver rtw89_8852be
> > > failed with error -16
> > >
> > > This issue does not reproduce on v6.16. The issue does not reproduce with
> > > the MT7921E or the AX210. Furthermore, the issue does not reproduce on the
> > > ROCK 5A or the ROCK 5 ITX+.
> > >
> > > The issue appears not to reproduce in or prior to commit 14bed9bc81ba. The
> > > issue reproduces, albeit with a low incidence rate, after commit
> > > bf76f23aa1c1.
> >
> > Both of these commits are merge commits and they seem to be not related to
> > PCI
> > or WiFi.
> >
> > > It reproduces, but not 100%, on v6.17, and is likely 100%
> > > reproducible on v6.18-rc.
> > >
> > > The dmesg output and the result of lspci -vv when the issue occurs can be
> > > found below:
> > > https://gist.github.com/RadxaNaoki/bf57b6d3d88c1e4310a23247e7bac9de
> > >
> > > What should I investigate next?
> > >
> >
> > So the patch from Niklas [1] didn't solve the issue on these board + WiFi
> > chip
> > combo?
>
> Yes, I am reproducing the issue with the patch applied, and it also reproduces
> on v6.17.
>
> The RTL8852BE on the ROCK 5B+ is an onboard component, while the ROCK 5B uses
> an M.2 module; the issue does not appear on the ROCK 5A or ROCK 5 ITX+ even
> with the same M.2 module and the same kernel/userland.
Hi,
There have been quite a few changes into rtw89 post-6.16. Depending on
how easy it is to reproduce the issue, a bisection might be useful to
pinpoint the cause.
> Best regards,
>
> --
> FUKAUMI Naoki
> Radxa Computer (Shenzhen) Co., Ltd.
>
> > - Mani
> >
> > [1]
> > https://lore.kernel.org/linux-pci/20251017163252.598812-2-cassel@kernel.org/
> >
>
>
>
--
i.
next prev parent reply other threads:[~2025-10-21 12:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-21 10:12 ROCK 5B/5B+ RTL8852BE probe failure on v6.18-rc FUKAUMI Naoki
2025-10-21 11:02 ` Manivannan Sadhasivam
2025-10-21 11:24 ` FUKAUMI Naoki
2025-10-21 12:19 ` Ilpo Järvinen [this message]
2025-10-21 12:17 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b7e058ab-a5bf-1e71-850f-03e99f274e77@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=linux-pci@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mani@kernel.org \
--cc=naoki@radxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox