public inbox for linux-pci@vger.kernel.org
 help / color / mirror / Atom feed
From: Dongdong Liu <liudongdong3@huawei.com>
To: <helgaas@kernel.org>, <mark.rutland@arm.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<wangzhou1@hisilicon.com>, <gabriele.paoloni@huawei.com>,
	<linuxarm@huawei.com>
Subject: Re: [PATCH] PCI: hisi: Fix DT binding (hisi-pcie-almost-ecam)
Date: Wed, 12 Apr 2017 18:24:10 +0800	[thread overview]
Message-ID: <ba97961b-ad10-65ed-63a0-e00fbaefbf03@huawei.com> (raw)
In-Reply-To: <1490275097-39349-1-git-send-email-liudongdong3@huawei.com>

Hi Bjorn

This is a fixup for v4.11, and needs to go
through ASAP so as to avoid a release with the broken binding.

Please help to look at the patch.

Thanks,
Dongdong

在 2017/3/23 21:18, Dongdong Liu 写道:
> The "hisilicon,pcie-almost-ecam", which goes against the usual DT
> conventions, and is non-sensical in that it describes the IP based on
> what it isn't. Fix the DT binding with "hisilicon,hip06-pcie-ecam"
> and "hisilicon,hip07-pcie-ecam".
>
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
> ---
>  Documentation/devicetree/bindings/pci/hisilicon-pcie.txt | 10 ++++++++--
>  drivers/pci/dwc/pcie-hisi.c                              |  6 +++++-
>  2 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index b7fa3b9..a339dbb 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
>  	};
>
>  HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
> +
> +Some BIOSes place the host controller in a mode where it is ECAM
> +compliant for all devices other than the root complex. In such cases,
> +the host controller should be described as below.
> +
>  The properties and their meanings are identical to those described in
>  host-generic-pci.txt except as listed below.
>
>  Properties of the host controller node that differ from
>  host-generic-pci.txt:
>
> -- compatible     : Must be "hisilicon,pcie-almost-ecam"
> +- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
> +		   "hisilicon,hip07-pcie-ecam"
>
>  - reg            : Two entries: First the ECAM configuration space for any
>  		   other bus underneath the root bus. Second, the base
> @@ -59,7 +65,7 @@ host-generic-pci.txt:
>
>  Example:
>  	pcie0: pcie@a0090000 {
> -		compatible = "hisilicon,pcie-almost-ecam";
> +		compatible = "hisilicon,hip06-pcie-ecam";
>  		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
>  		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
>  		bus-range = <0  31>;
> diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> index fd66a31..cf9d6a9 100644
> --- a/drivers/pci/dwc/pcie-hisi.c
> +++ b/drivers/pci/dwc/pcie-hisi.c
> @@ -380,9 +380,13 @@ struct pci_ecam_ops hisi_pcie_platform_ops = {
>
>  static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
>  	{
> -		.compatible = "hisilicon,pcie-almost-ecam",
> +		.compatible =  "hisilicon,hip06-pcie-ecam",
>  		.data	    = (void *) &hisi_pcie_platform_ops,
>  	},
> +	{
> +		.compatible =  "hisilicon,hip07-pcie-ecam",
> +		.data       = (void *) &hisi_pcie_platform_ops,
> +	},
>  	{},
>  };
>
>

  parent reply	other threads:[~2017-04-12 10:24 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-23 13:18 [PATCH] PCI: hisi: Fix DT binding (hisi-pcie-almost-ecam) Dongdong Liu
2017-03-23 16:37 ` Mark Rutland
2017-04-12 10:24 ` Dongdong Liu [this message]
2017-04-12 15:49 ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ba97961b-ad10-65ed-63a0-e00fbaefbf03@huawei.com \
    --to=liudongdong3@huawei.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gabriele.paoloni@huawei.com \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mark.rutland@arm.com \
    --cc=wangzhou1@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox