From: "Poosa, Karthik" <karthik.poosa@intel.com>
To: Badal Nilawar <badal.nilawar@intel.com>,
<intel-xe@lists.freedesktop.org>, <linux-acpi@vger.kernel.org>,
<linux-pci@vger.kernel.org>
Cc: <anshuman.gupta@intel.com>, <rafael@kernel.org>,
<lenb@kernel.org>, <bhelgaas@google.com>,
<ilpo.jarvinen@linux.intel.com>, <lucas.demarchi@intel.com>,
<rodrigo.vivi@intel.com>, <varun.gupta@intel.com>,
<ville.syrjala@linux.intel.com>, <uma.shankar@intel.com>
Subject: Re: [v4,10/11] drm/xe/vrsr: Enable VRSR
Date: Tue, 24 Jun 2025 17:15:30 +0530 [thread overview]
Message-ID: <bd981a4a-e678-429d-8526-abd9290906d1@intel.com> (raw)
In-Reply-To: <20250529111654.3140766-11-badal.nilawar@intel.com>
On 29-05-2025 16:46, Badal Nilawar wrote:
> From: Anshuman Gupta <anshuman.gupta@intel.com>
>
> Enabling VRSR in runtime suspend and also in System wide suspend.
This can be rephrased to -
Integrate VRSR into both system-wide and runtime suspend-resume flows.
> Also fix couple of typo in xe_pm.c.
>
> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> ---
> drivers/gpu/drm/xe/xe_pci.c | 4 ++--
> drivers/gpu/drm/xe/xe_pm.c | 46 +++++++++++++++++++++++++++----------
> 2 files changed, 36 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_pci.c b/drivers/gpu/drm/xe/xe_pci.c
> index 5ae1df345416..fdf878594fb0 100644
> --- a/drivers/gpu/drm/xe/xe_pci.c
> +++ b/drivers/gpu/drm/xe/xe_pci.c
> @@ -926,7 +926,7 @@ static int xe_pci_suspend(struct device *dev)
>
> /*
> * Enabling D3Cold is needed for S2Idle/S0ix.
> - * It is save to allow here since xe_pm_suspend has evicted
> + * It is safe to allow here since xe_pm_suspend has evicted
> * the local memory and the direct complete optimization is disabled.
> */
> d3cold_toggle(pdev, D3COLD_ENABLE);
> @@ -943,7 +943,7 @@ static int xe_pci_resume(struct device *dev)
> struct pci_dev *pdev = to_pci_dev(dev);
> int err;
>
> - /* Give back the D3Cold decision to the runtime P M*/
> + /* Give back the D3Cold decision to the runtime PM */
> d3cold_toggle(pdev, D3COLD_DISABLE);
>
> err = pci_set_power_state(pdev, PCI_D0);
> diff --git a/drivers/gpu/drm/xe/xe_pm.c b/drivers/gpu/drm/xe/xe_pm.c
> index 1e061bfc3e52..19596d467298 100644
> --- a/drivers/gpu/drm/xe/xe_pm.c
> +++ b/drivers/gpu/drm/xe/xe_pm.c
> @@ -147,10 +147,12 @@ int xe_pm_suspend(struct xe_device *xe)
>
> xe_display_pm_suspend(xe);
>
> - /* FIXME: Super racey... */
> - err = xe_bo_evict_all(xe);
> - if (err)
> - goto err_pxp;
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> + /* FIXME: Super racey... */
> + err = xe_bo_evict_all(xe);
> + if (err)
> + goto err_pxp;
> + }
>
> for_each_gt(gt, xe, id) {
> err = xe_gt_suspend(gt);
> @@ -162,6 +164,12 @@ int xe_pm_suspend(struct xe_device *xe)
>
> xe_display_pm_suspend_late(xe);
>
> + if (xe->d3cold.target_state == XE_D3COLD_VRSR) {
> + err = xe_pm_vrsr_enable(xe, true);
> + if (err)
> + goto err_display;
> + }
> +
> drm_dbg(&xe->drm, "Device suspended\n");
> return 0;
>
> @@ -203,9 +211,11 @@ int xe_pm_resume(struct xe_device *xe)
> * This only restores pinned memory which is the memory required for the
> * GT(s) to resume.
> */
> - err = xe_bo_restore_early(xe);
> - if (err)
> - goto err;
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> + err = xe_bo_restore_early(xe);
> + if (err)
> + goto err;
> + }
>
> xe_irq_resume(xe);
>
> @@ -214,9 +224,11 @@ int xe_pm_resume(struct xe_device *xe)
>
> xe_display_pm_resume(xe);
>
> - err = xe_bo_restore_late(xe);
> - if (err)
> - goto err;
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> + err = xe_bo_restore_late(xe);
> + if (err)
> + goto err;
> + }
>
> xe_pxp_pm_resume(xe->pxp);
>
> @@ -616,7 +628,7 @@ int xe_pm_runtime_suspend(struct xe_device *xe)
>
> xe_display_pm_runtime_suspend(xe);
>
> - if (xe->d3cold.target_state) {
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> err = xe_bo_evict_all(xe);
> if (err)
> goto out_resume;
> @@ -632,6 +644,14 @@ int xe_pm_runtime_suspend(struct xe_device *xe)
>
> xe_display_pm_runtime_suspend_late(xe);
>
> + if (xe->d3cold.target_state == XE_D3COLD_VRSR) {
> + err = xe_pm_vrsr_enable(xe, true);
> + if (err) {
> + drm_err(&xe->drm, "Failed to enable VRSR: %d\n", err);
> + goto out_resume;
> + }
> + }
> +
> xe_rpm_lockmap_release(xe);
> xe_pm_write_callback_task(xe, NULL);
> return 0;
> @@ -669,7 +689,9 @@ int xe_pm_runtime_resume(struct xe_device *xe)
> goto out;
>
> xe_display_pm_resume_early(xe);
> + }
>
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> /*
> * This only restores pinned memory which is the memory
> * required for the GT(s) to resume.
> @@ -686,7 +708,7 @@ int xe_pm_runtime_resume(struct xe_device *xe)
>
> xe_display_pm_runtime_resume(xe);
>
> - if (xe->d3cold.target_state) {
> + if (xe->d3cold.target_state == XE_D3COLD_OFF) {
> err = xe_bo_restore_late(xe);
> if (err)
> goto out;
Please rephrase commit message. Other than that, code code flow looks fine.
Acked-by: Karthik Poosa <karthik.poosa@intel.com>
next prev parent reply other threads:[~2025-06-24 11:45 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-29 11:16 [PATCH v4 00/11] VRAM Self Refresh Badal Nilawar
2025-05-29 11:16 ` [PATCH v4 01/11] PCI/ACPI: Add D3cold Aux Power Limit_DSM method Badal Nilawar
2025-05-29 21:36 ` Sathyanarayanan Kuppuswamy
2025-09-02 6:04 ` Nilawar, Badal
2025-07-02 11:08 ` Rafael J. Wysocki
2025-09-02 8:10 ` Nilawar, Badal
2025-05-29 11:16 ` [PATCH v4 02/11] PCI/ACPI: Per root port allow one Aux power limit request Badal Nilawar
2025-05-29 21:41 ` Sathyanarayanan Kuppuswamy
2025-07-02 11:11 ` Rafael J. Wysocki
2025-07-02 14:03 ` Sathyanarayanan Kuppuswamy
2025-07-02 11:21 ` Rafael J. Wysocki
2025-09-02 8:43 ` Nilawar, Badal
2025-07-02 11:28 ` Ilpo Järvinen
2025-09-02 8:53 ` Nilawar, Badal
2025-05-29 11:16 ` [PATCH v4 03/11] PCI/ACPI: Add PERST# Assertion Delay _DSM method Badal Nilawar
2025-05-29 21:57 ` Sathyanarayanan Kuppuswamy
2025-07-02 11:25 ` Rafael J. Wysocki
2025-09-02 8:22 ` Nilawar, Badal
2025-05-29 11:16 ` [PATCH v4 04/11] drm/xe/vrsr: Introduce flag has_vrsr Badal Nilawar
2025-06-06 9:38 ` [v4,04/11] " Poosa, Karthik
2025-05-29 11:16 ` [PATCH v4 05/11] drm/xe/vrsr: Detect VRSR Capability Badal Nilawar
2025-05-29 11:16 ` [PATCH v4 06/11] drm/xe/vrsr: Initialize VRSR feature Badal Nilawar
2025-06-24 10:28 ` [v4,06/11] " Poosa, Karthik
2025-09-03 13:39 ` Nilawar, Badal
2025-05-29 11:16 ` [PATCH v4 07/11] drm/xe/vrsr: Enable VRSR on default VGA boot device Badal Nilawar
2025-06-06 13:07 ` Jani Nikula
2025-09-03 14:18 ` Nilawar, Badal
2025-05-29 11:16 ` [PATCH v4 08/11] drm/xe/vrsr: Refactor d3cold.allowed to a enum Badal Nilawar
2025-05-29 11:16 ` [PATCH v4 09/11] drm/xe/pm: D3Cold target state Badal Nilawar
2025-06-24 11:10 ` [v4,09/11] " Poosa, Karthik
2025-05-29 11:16 ` [PATCH v4 10/11] drm/xe/vrsr: Enable VRSR Badal Nilawar
2025-06-24 11:45 ` Poosa, Karthik [this message]
2025-09-03 14:16 ` [v4,10/11] " Nilawar, Badal
2025-09-04 6:01 ` Poosa, Karthik
2025-05-29 11:16 ` [PATCH v4 11/11] drm/xe/vrsr: Introduce a debugfs node named vrsr_capable Badal Nilawar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd981a4a-e678-429d-8526-abd9290906d1@intel.com \
--to=karthik.poosa@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=badal.nilawar@intel.com \
--cc=bhelgaas@google.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lucas.demarchi@intel.com \
--cc=rafael@kernel.org \
--cc=rodrigo.vivi@intel.com \
--cc=uma.shankar@intel.com \
--cc=varun.gupta@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).