From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-pci-owner@vger.kernel.org>
Received: from lucky1.263xmail.com ([211.157.147.131]:55854 "EHLO
	lucky1.263xmail.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1752758AbcFLBfL (ORCPT
	<rfc822;linux-pci@vger.kernel.org>); Sat, 11 Jun 2016 21:35:11 -0400
Subject: Re: [PATCH v2 1/2] Documentation: bindings: add dt doc for Rockchip
 PCIe controller
To: Doug Anderson <dianders@chromium.org>,
	Shawn Lin <shawn.lin@rock-chips.com>
References: <1465373117-823-1-git-send-email-shawn.lin@rock-chips.com>
 <CAD=FV=XiRgjAU2STck4mcWAERqZDvNSsCUytHDnWD+SHL2sRrQ@mail.gmail.com>
Cc: "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Arnd Bergmann <arnd@arndb.de>,
	Marc Zyngier <marc.zyngier@arm.com>, linux-pci@vger.kernel.org,
	Wenrui Li <wenrui.li@rock-chips.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"open list:ARM/Rockchip SoC..." <linux-rockchip@lists.infradead.org>,
	Rob Herring <robh+dt@kernel.org>,
	Bjorn Helgaas <bhelgaas@google.com>
From: Shawn Lin <shawn.lin@rock-chips.com>
Message-ID: <bdbc3e8e-b06a-4adf-bf61-56cc19ca67d9@rock-chips.com>
Date: Sun, 12 Jun 2016 09:34:56 +0800
MIME-Version: 1.0
In-Reply-To: <CAD=FV=XiRgjAU2STck4mcWAERqZDvNSsCUytHDnWD+SHL2sRrQ@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Sender: linux-pci-owner@vger.kernel.org
List-ID: <linux-pci.vger.kernel.org>

在 2016/6/10 12:01, Doug Anderson 写道:
> Shawn,
>
> On Wed, Jun 8, 2016 at 1:05 AM, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>> +pcie0: pcie@f8000000 {
>> +       compatible = "rockchip,rk3399-pcie";
>> +       #address-cells = <3>;
>> +       #size-cells = <2>;
>> +       clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
>> +                <&cru PCLK_PCIE>;
>> +       clock-names = "aclk", "aclk-perf",
>> +                     "hclk";
>
> Code also requires a "pm" clock.
>
>> +       bus-range = <0x0 0x1>;
>> +       interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
>> +                    <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>> +       interrupt-names: "sys", "legacy", "client";
>
> Shouldn't be ":", should be "=".
>
>
>> +       assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
>> +       assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
>> +       assigned-clock-rates = <100000000>;
>> +       ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
>> +       ranges = < 0x82000000 0 0xfa000000 0x0 0xfa000000 0 0x600000
>> +                  0x81000000 0 0xfa600000 0x0 0xfa600000 0 0x100000 >;
>
> nit: I don't thin it's common to have spaces before/after the ">" and "<".
> nit: Be consistent about 0 vs. 0x0 in ranges.
>
>
>> +       num-lanes = <4>;
>> +       reg = < 0x0 0xf8000000 0x0 0x2000000 >, < 0x0 0xfd000000 0x0 0x1000000 >;
>> +       reg-name = "axi-base", "apb-base";
>
> Should be "reg-names" (with an "s")
>
>
>> +       resets = <&cru SRST_PCIEPHY>, <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
>> +                <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
>> +       reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
>
> You have 5 resets but 4 reset names.  That doesn't seem right.  Code
> shows you only getting 4, so presumably you need to remove the
> SRST_PCIEPHY one.

Thanks for catching these above as I forgot to rework the this sample.

>
>
> -Doug
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>


-- 
Best Regards
Shawn Lin