From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linux-pci@vger.kernel.org, Bjorn Helgaas <bhelgaas@google.com>,
Dominik Brodowski <linux@dominikbrodowski.net>,
LKML <linux-kernel@vger.kernel.org>,
Simon Richter <Simon.Richter@hogyros.de>
Subject: Re: [PATCH 05/23] PCI: Remove old_size limit from bridge window sizing
Date: Tue, 27 Jan 2026 12:16:38 +0200 (EET) [thread overview]
Message-ID: <c46c4bd1-51e3-d76a-5ae9-14bd31b57aa1@linux.intel.com> (raw)
In-Reply-To: <20260126171601.GA249217@bhelgaas>
[-- Attachment #1: Type: text/plain, Size: 5469 bytes --]
On Mon, 26 Jan 2026, Bjorn Helgaas wrote:
> On Fri, Dec 19, 2025 at 07:40:18PM +0200, Ilpo Järvinen wrote:
> > calculate_memsize() applies lower bound to the resource size before
> > aligning the resource size making it impossible to shrink bridge window
> > resources. I've not found any justification for this lower bound and
> > nothing indicated it was to work around some HW issue.
> >
> > Prior to the commit 3baeae36039a ("PCI: Use pci_release_resource()
> > instead of release_resource()"), releasing a bridge window during BAR
> > resize resulted in clearing start and end address of the resource.
> > Clearing addresses destroys the resource size as a side-effect,
> > therefore nullifying the effect of the old size lower bound.
> >
> > After the commit 3baeae36039a ("PCI: Use pci_release_resource() instead
> > of release_resource()"), BAR resize uses the aligned old size, which
> > results in exceeding what fits into the parent window in some cases:
> >
> > xe 0030:03:00.0: [drm] Attempting to resize bar from 256MiB -> 16384MiB
> > xe 0030:03:00.0: BAR 0 [mem 0x620c000000000-0x620c000ffffff 64bit]: releasing
> > xe 0030:03:00.0: BAR 2 [mem 0x6200000000000-0x620000fffffff 64bit pref]: releasing
> > pci 0030:02:01.0: bridge window [mem 0x6200000000000-0x620001fffffff 64bit pref]: releasing
> > pci 0030:01:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: releasing
> > pci 0030:00:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref]: was not released (still contains assigned resources)
> > pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] free space at [mem 0x6200400000000-0x62007ffffffff 64bit pref]
> > pci 0030:00:00.0: Assigned bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] to [bus 01-04] cannot fit 0x4000000000 required for 0030:01:00.0 bridging to [bus 02-04]
> >
> > The old size of 0x6200000000000-0x6203fbff0ffff resource was used as
> > the lower bound which results in 0x4000000000 size request due to
> > alignment. That exceed what can fit into the parent window.
> >
> > Since the lower bound never even was enforced fully because the
> > resource addresses were cleared when the bridge window is released,
> > remove the old_size lower bound entirely and trust the calculated
> > bridge window size is enough.
> >
> > This same problem may occur on io window side but seems less likely to
> > cause issues due to general difference in alignment. Removing the lower
> > bound may have other unforeseen consequences in case of io window so
> > it's better to do leave as -next material if no problem is reported
> > related to io window sizing (BAR resize shouldn't touch io windows
> > anyway).
> >
> > Reported-by: Simon Richter <Simon.Richter@hogyros.de>
>
> I guess this report was
> https://lore.kernel.org/r/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/,
> right?
Yes,
I seem to have forgotten to add the Link once again despite trying to
really remember it. I'm sorry about that.
> > Fixes: 3baeae36039a ("PCI: Use pci_release_resource() instead of release_resource()")
> > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> > ---
> > drivers/pci/setup-bus.c | 11 +++--------
> > 1 file changed, 3 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> > index 612288716ba8..8660449f59bd 100644
> > --- a/drivers/pci/setup-bus.c
> > +++ b/drivers/pci/setup-bus.c
> > @@ -1071,16 +1071,13 @@ static resource_size_t calculate_memsize(resource_size_t size,
> > resource_size_t min_size,
> > resource_size_t add_size,
> > resource_size_t children_add_size,
> > - resource_size_t old_size,
> > resource_size_t align)
> > {
> > if (size < min_size)
> > size = min_size;
> > - if (old_size == 1)
> > - old_size = 0;
> >
> > size = max(size, add_size) + children_add_size;
> > - return ALIGN(max(size, old_size), align);
> > + return ALIGN(size, align);
> > }
> >
> > resource_size_t __weak pcibios_window_alignment(struct pci_bus *bus,
> > @@ -1298,7 +1295,6 @@ static void pbus_size_mem(struct pci_bus *bus, unsigned long type,
> > resource_size_t children_add_size = 0;
> > resource_size_t children_add_align = 0;
> > resource_size_t add_align = 0;
> > - resource_size_t old_size;
> >
> > if (!b_res)
> > return;
> > @@ -1364,11 +1360,10 @@ static void pbus_size_mem(struct pci_bus *bus, unsigned long type,
> > }
> > }
> >
> > - old_size = resource_size(b_res);
> > win_align = window_alignment(bus, b_res->flags);
> > min_align = calculate_head_align(aligns, max_order);
> > min_align = max(min_align, win_align);
> > - size0 = calculate_memsize(size, min_size, 0, 0, old_size, win_align);
> > + size0 = calculate_memsize(size, min_size, 0, 0, win_align);
> >
> > if (size0) {
> > resource_set_range(b_res, min_align, size0);
> > @@ -1378,7 +1373,7 @@ static void pbus_size_mem(struct pci_bus *bus, unsigned long type,
> > if (realloc_head && (add_size > 0 || children_add_size > 0)) {
> > add_align = max(min_align, add_align);
> > size1 = calculate_memsize(size, min_size, add_size, children_add_size,
> > - old_size, win_align);
> > + win_align);
> > }
> >
> > if (!size0 && !size1) {
> > --
> > 2.39.5
> >
>
next prev parent reply other threads:[~2026-01-27 10:16 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-19 17:40 [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 01/23] PCI: Fix bridge window alignment with optional resources Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 02/23] PCI: Rewrite bridge window head alignment function Ilpo Järvinen
2026-01-26 22:17 ` Bjorn Helgaas
2026-01-27 11:22 ` Ilpo Järvinen
2026-01-27 22:39 ` Bjorn Helgaas
2025-12-19 17:40 ` [PATCH 03/23] PCI: Stop over-estimating bridge window size Ilpo Järvinen
2026-03-05 15:13 ` Guenter Roeck
2026-03-05 16:28 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 04/23] resource: Increase MAX_IORES_LEVEL to 8 Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 05/23] PCI: Remove old_size limit from bridge window sizing Ilpo Järvinen
2026-01-26 17:16 ` Bjorn Helgaas
2026-01-26 20:09 ` Bjorn Helgaas
2026-01-27 11:39 ` Ilpo Järvinen
2026-01-27 22:42 ` Bjorn Helgaas
2026-01-27 10:16 ` Ilpo Järvinen [this message]
2025-12-19 17:40 ` [PATCH 06/23] PCI: Push realloc check into pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 07/23] PCI: Pass bridge window resource to pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 08/23] PCI: Use res_to_dev_res() in reassign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 09/23] PCI: Fetch dev_res to local var in __assign_resources_sorted() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 10/23] PCI: Add pci_resource_is_bridge_win() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 11/23] PCI: Log reset and restore of resources Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 12/23] PCI: Check invalid align earlier in pbus_size_mem() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 13/23] PCI: Add pbus_mem_size_optional() to handle optional sizes Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 14/23] resource: Mark res given to resource_assigned() as const Ilpo Järvinen
2025-12-19 17:47 ` Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 15/23] PCI: Use resource_assigned() in setup-bus.c algorithm Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 16/23] PCI: Properly prefix struct pci_dev_resource handling functions Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 17/23] PCI: Separate cardbus setup & build it only with CONFIG_CARDBUS Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 18/23] PCI: Handle CardBus specific params in setup-cardbus.c Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 19/23] PCI: Use scnprintf() instead of sprintf() Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 20/23] PCI: Add Bus Number + Secondary Latency Timer as dword fields Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 21/23] PCI: Convert to use Bus Number field defines Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 22/23] PCI: Add pbus_validate_busn() for Bus Number validation Ilpo Järvinen
2025-12-19 17:40 ` [PATCH 23/23] PCI: Move scanbus bridge scanning to setup-cardbus.c Ilpo Järvinen
2026-01-26 17:39 ` [PATCH 00/23] PCI: Resource code fixes (supercedes earlier series) & cleanups Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c46c4bd1-51e3-d76a-5ae9-14bd31b57aa1@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Simon.Richter@hogyros.de \
--cc=bhelgaas@google.com \
--cc=helgaas@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@dominikbrodowski.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox