Re: [PATCH v3] PCI: Add pci_enable_atomic_request

[Jay Cornwall <jay@jcornwall.me>]

On 2015-12-04 12:25, Bjorn Helgaas wrote:
> On Thu, Sep 24, 2015 at 10:59:50AM -0500, Jay Cornwall wrote:
>> The PCIe 3.0 AtomicOp (6.15) feature allows atomic transctions to be 
>> requested
>> by, routed through and completed by PCIe components. Routing and 
>> completion
>> do not require software support. Component support for each is 
>> detectable via
>> the DEVCAP2 register.
>> 
>> AtomicOp requests are permitted only if a component's
>> DEVCTL2.ATOMICOP_REQUESTER_ENABLE field is set. This capability cannot 
>> be
>> detected but is a no-op if set on a component with no support. These 
>> requests
>> can only be serviced if the upstream components support AtomicOp 
>> completion
>> and/or routing to a component which does.
>> 
>> A concrete example is the AMD Fiji-class GPU, which is specified to 
>> support
>> AtomicOp requests, routed through a PLX 8747 switch (advertising 
>> AtomicOp
>> routing) to a Haswell host bridge (advertising AtomicOp completion 
>> support).
>> When AtomicOp requests are disabled the GPU logs attempts to initiate 
>> requests
>> to an MMIO register for debugging.
>> 
>> Add pci_enable_atomic_request for per-device control over AtomicOp 
>> requests.
>> Upstream bridges are checked for AtomicOp routing capability and the 
>> call
>> fails if any lack this capability. The root port is checked for 
>> AtomicOp
>> completion capabilities and the call fails if it does not support any.
>> Routes to other PCIe components are not checked for AtomicOp routing 
>> and
>> completion capabilities.
>> 
>> v2: Check for AtomicOp route to root port with AtomicOp completion
>> v3: Style fixes
>> 
>> Signed-off-by: Jay Cornwall <jay@jcornwall.me>
> 
> Hi Jay,
> 
> Is there a user for this new functionality?  I don't like to add things
> that have no apparent user.
> 
> Bjorn

The client for this code is scheduled to be upstreamed in drm/amdgpu, 
but we have some internal restructuring to complete before a patchset 
will be available.

If you'd prefer, I can resubmit this patch as part of that series when 
it is ready.


> 
>> ---
>>  drivers/pci/pci.c             | 70 
>> +++++++++++++++++++++++++++++++++++++++++++
>>  include/linux/pci.h           |  1 +
>>  include/uapi/linux/pci_regs.h |  5 ++++
>>  3 files changed, 76 insertions(+)
>> 
>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>> index 6a9a111..edc56e4 100644
>> --- a/drivers/pci/pci.c
>> +++ b/drivers/pci/pci.c
>> @@ -2453,6 +2453,76 @@ bool pci_acs_path_enabled(struct pci_dev 
>> *start,
>>  }
>> 
>>  /**
>> + * pci_enable_atomic_request - enable or disable AtomicOp requester
>> + * @dev: the PCI device
>> + *
>> + * Return 0 if the device is capable of generating AtomicOp requests,
>> + * all upstream bridges support AtomicOp routing, and the root port 
>> supports
>> + * 32-bit, 64-bit and/or 128-bit AtomicOp completion, or negative 
>> otherwise.
>> + */
>> +int pci_enable_atomic_request(struct pci_dev *dev)
>> +{
>> +	struct pci_bus *bus = dev->bus;
>> +
>> +	if (!pci_is_pcie(dev))
>> +		return -EINVAL;
>> +
>> +	switch (pci_pcie_type(dev)) {
>> +	/*
>> +	 * PCIe 3.0, 6.15 specifies that endpoints and root ports are 
>> permitted
>> +	 * to implement AtomicOp requester capabilities.
>> +	 */
>> +	case PCI_EXP_TYPE_ENDPOINT:
>> +	case PCI_EXP_TYPE_LEG_END:
>> +	case PCI_EXP_TYPE_RC_END:
>> +	case PCI_EXP_TYPE_ROOT_PORT:
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	while (bus->parent) {
>> +		struct pci_dev *bridge = bus->self;
>> +		u32 cap;
>> +
>> +		pcie_capability_read_dword(bridge, PCI_EXP_DEVCAP2, &cap);
>> +
>> +		switch (pci_pcie_type(bridge)) {
>> +		/*
>> +		 * Upstream, downstream and root ports may implement AtomicOp
>> +		 * routing capabilities. AtomicOp routing via a root port is
>> +		 * not considered.
>> +		 */
>> +		case PCI_EXP_TYPE_UPSTREAM:
>> +		case PCI_EXP_TYPE_DOWNSTREAM:
>> +			if (!(cap & PCI_EXP_DEVCAP2_ATOMIC_ROUTING))
>> +				return -EINVAL;
>> +			break;
>> +
>> +		/*
>> +		 * Root ports are permitted to implement AtomicOp completion
>> +		 * capabilities.
>> +		 */
>> +		case PCI_EXP_TYPE_ROOT_PORT:
>> +			if (!(cap & (PCI_EXP_DEVCAP2_ATOMIC_COMP32 |
>> +				     PCI_EXP_DEVCAP2_ATOMIC_COMP64 |
>> +				     PCI_EXP_DEVCAP2_ATOMIC_COMP128)))
>> +				return -EINVAL;
>> +			break;
>> +		}
>> +
>> +
>> +		bus = bus->parent;
>> +	}
>> +
>> +	pcie_capability_set_word(dev, PCI_EXP_DEVCTL2,
>> +				 PCI_EXP_DEVCTL2_ATOMICOP_REQ);
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL(pci_enable_atomic_request);
>> +
>> +/**
>>   * pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
>>   * @dev: the PCI device
>>   * @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
>> diff --git a/include/linux/pci.h b/include/linux/pci.h
>> index e90eb22..4e50003 100644
>> --- a/include/linux/pci.h
>> +++ b/include/linux/pci.h
>> @@ -1801,6 +1801,7 @@ void pci_request_acs(void);
>>  bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags);
>>  bool pci_acs_path_enabled(struct pci_dev *start,
>>  			  struct pci_dev *end, u16 acs_flags);
>> +int pci_enable_atomic_request(struct pci_dev *dev);
>> 
>>  #define PCI_VPD_LRDT			0x80	/* Large Resource Data Type */
>>  #define PCI_VPD_LRDT_ID(x)		((x) | PCI_VPD_LRDT)
>> diff --git a/include/uapi/linux/pci_regs.h 
>> b/include/uapi/linux/pci_regs.h
>> index 413417f..013c2bd 100644
>> --- a/include/uapi/linux/pci_regs.h
>> +++ b/include/uapi/linux/pci_regs.h
>> @@ -571,6 +571,10 @@
>>   */
>>  #define PCI_EXP_DEVCAP2		36	/* Device Capabilities 2 */
>>  #define  PCI_EXP_DEVCAP2_ARI		0x00000020 /* Alternative Routing-ID */
>> +#define  PCI_EXP_DEVCAP2_ATOMIC_ROUTING	0x00000040 /* AtomicOp 
>> routing */
>> +#define  PCI_EXP_DEVCAP2_ATOMIC_COMP32	0x00000080 /* 32b AtomicOp 
>> completion */
>> +#define  PCI_EXP_DEVCAP2_ATOMIC_COMP64	0x00000100 /* 64b AtomicOp 
>> completion */
>> +#define  PCI_EXP_DEVCAP2_ATOMIC_COMP128	0x00000200 /* 128b AtomicOp 
>> completion*/
>>  #define  PCI_EXP_DEVCAP2_LTR		0x00000800 /* Latency tolerance 
>> reporting */
>>  #define  PCI_EXP_DEVCAP2_OBFF_MASK	0x000c0000 /* OBFF support 
>> mechanism */
>>  #define  PCI_EXP_DEVCAP2_OBFF_MSG	0x00040000 /* New message signaling 
>> */
>> @@ -578,6 +582,7 @@
>>  #define PCI_EXP_DEVCTL2		40	/* Device Control 2 */
>>  #define  PCI_EXP_DEVCTL2_COMP_TIMEOUT	0x000f	/* Completion Timeout 
>> Value */
>>  #define  PCI_EXP_DEVCTL2_ARI		0x0020	/* Alternative Routing-ID */
>> +#define  PCI_EXP_DEVCTL2_ATOMICOP_REQ	0x0040	/* Allow AtomicOp 
>> requests */
>>  #define  PCI_EXP_DEVCTL2_IDO_REQ_EN	0x0100	/* Allow IDO for requests 
>> */
>>  #define  PCI_EXP_DEVCTL2_IDO_CMP_EN	0x0200	/* Allow IDO for 
>> completions */
>>  #define  PCI_EXP_DEVCTL2_LTR_EN		0x0400	/* Enable LTR mechanism */
>> --
>> 1.9.1
>> 
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-pci" 
>> in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Jay Cornwall