linux-pci.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: "Fabio M. De Francesco" <fabio.m.de.francesco@linux.intel.com>,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Len Brown <lenb@kernel.org>, Davidlohr Bueso <dave@stgolabs.net>,
	Jonathan Cameron <jonathan.cameron@huawei.com>,
	Alison Schofield <alison.schofield@intel.com>,
	Vishal Verma <vishal.l.verma@intel.com>,
	Ira Weiny <ira.weiny@intel.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Mahesh J Salgaonkar <mahesh@linux.ibm.com>,
	Oliver O'Halloran <oohall@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Tony Luck <tony.luck@intel.com>, Borislav Petkov <bp@alien8.de>,
	linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org,
	linux-cxl@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-pci@vger.kernel.org, linux-edac@vger.kernel.org
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Subject: Re: [PATCH 3/4 v3] ACPI: extlog: Trace CPER PCI Express Error Section
Date: Tue, 3 Jun 2025 14:49:10 -0700	[thread overview]
Message-ID: <d37669fc-72e6-48d8-a080-e0353ccc812d@intel.com> (raw)
In-Reply-To: <20250603155536.577493-4-fabio.m.de.francesco@linux.intel.com>



On 6/3/25 8:54 AM, Fabio M. De Francesco wrote:
> I/O Machine Check Architecture events may signal failing PCIe components
> or links. The AER event contains details on what was happening on the wire
> when the error was signaled.
> 
> Trace the CPER PCIe Error section (UEFI v2.10, Appendix N.2.7) reported
> by the I/O MCA.
> 
> Cc: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Fabio M. De Francesco <fabio.m.de.francesco@linux.intel.com>

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
>  drivers/acpi/Kconfig       |  1 +
>  drivers/acpi/acpi_extlog.c | 32 ++++++++++++++++++++++++++++++++
>  drivers/pci/pcie/aer.c     |  2 +-
>  include/linux/aer.h        |  8 ++++++--
>  4 files changed, 40 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index 7bc40c2735ac0..2bbd9e4868ad7 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -493,6 +493,7 @@ config ACPI_EXTLOG
>  	tristate "Extended Error Log support"
>  	depends on X86_MCE && X86_LOCAL_APIC && EDAC
>  	select UEFI_CPER
> +	select ACPI_APEI_PCIEAER
>  	help
>  	  Certain usages such as Predictive Failure Analysis (PFA) require
>  	  more information about the error than what can be described in
> diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c
> index 47d11cb5c9120..b2928ff297eda 100644
> --- a/drivers/acpi/acpi_extlog.c
> +++ b/drivers/acpi/acpi_extlog.c
> @@ -132,6 +132,34 @@ static int print_extlog_rcd(const char *pfx,
>  	return 1;
>  }
>  
> +static void extlog_print_pcie(struct cper_sec_pcie *pcie_err,
> +			      int severity)
> +{
> +	struct aer_capability_regs *aer;
> +	struct pci_dev *pdev;
> +	unsigned int devfn;
> +	unsigned int bus;
> +	int aer_severity;
> +	int domain;
> +
> +	if (!(pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID ||
> +	      pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO))
> +		return;
> +
> +	aer_severity = cper_severity_to_aer(severity);
> +	aer = (struct aer_capability_regs *)pcie_err->aer_info;
> +	domain = pcie_err->device_id.segment;
> +	bus = pcie_err->device_id.bus;
> +	devfn = PCI_DEVFN(pcie_err->device_id.device,
> +			  pcie_err->device_id.function);
> +	pdev = pci_get_domain_bus_and_slot(domain, bus, devfn);
> +	if (!pdev)
> +		return;
> +
> +	pci_print_aer(KERN_DEBUG, pdev, aer_severity, aer);
> +	pci_dev_put(pdev);
> +}
> +
>  static int extlog_print(struct notifier_block *nb, unsigned long val,
>  			void *data)
>  {
> @@ -183,6 +211,10 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
>  			if (gdata->error_data_length >= sizeof(*mem))
>  				trace_extlog_mem_event(mem, err_seq, fru_id, fru_text,
>  						       (u8)gdata->error_severity);
> +		} else if (guid_equal(sec_type, &CPER_SEC_PCIE)) {
> +			struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
> +
> +			extlog_print_pcie(pcie_err, gdata->error_severity);
>  		} else {
>  			void *err = acpi_hest_get_payload(gdata);
>  
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index d0ebf7c15afa9..627fcf4346983 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -801,7 +801,7 @@ void pci_print_aer(char *level, struct pci_dev *dev, int aer_severity,
>  	trace_aer_event(dev_name(&dev->dev), (status & ~mask),
>  			aer_severity, tlp_header_valid, &aer->header_log);
>  }
> -EXPORT_SYMBOL_NS_GPL(pci_print_aer, "CXL");
> +EXPORT_SYMBOL_GPL(pci_print_aer);
>  
>  /**
>   * add_error_device - list device to be handled
> diff --git a/include/linux/aer.h b/include/linux/aer.h
> index 45d0fb2e2e759..6ce433cee4625 100644
> --- a/include/linux/aer.h
> +++ b/include/linux/aer.h
> @@ -56,16 +56,20 @@ struct aer_capability_regs {
>  #if defined(CONFIG_PCIEAER)
>  int pci_aer_clear_nonfatal_status(struct pci_dev *dev);
>  int pcie_aer_is_native(struct pci_dev *dev);
> +void pci_print_aer(char *level, struct pci_dev *dev, int aer_severity,
> +		   struct aer_capability_regs *aer);
>  #else
>  static inline int pci_aer_clear_nonfatal_status(struct pci_dev *dev)
>  {
>  	return -EINVAL;
>  }
>  static inline int pcie_aer_is_native(struct pci_dev *dev) { return 0; }
> +static inline void pci_print_aer(char *level, struct pci_dev *dev,
> +				 int aer_severity,
> +				 struct aer_capability_regs *aer)
> +{ }
>  #endif
>  
> -void pci_print_aer(char *level, struct pci_dev *dev, int aer_severity,
> -		   struct aer_capability_regs *aer);
>  int cper_severity_to_aer(int cper_severity);
>  void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
>  		       int severity, struct aer_capability_regs *aer_regs);


  parent reply	other threads:[~2025-06-03 21:49 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-03 15:54 [PATCH 0/4 v3] Make ELOG and GHES log and trace consistently Fabio M. De Francesco
2025-06-03 15:54 ` [PATCH 1/4 v3] ACPI: extlog: Trace CPER Non-standard Section Body Fabio M. De Francesco
2025-06-03 21:14   ` Dave Jiang
2025-06-04  5:49   ` Zhuo, Qiuxu
2025-06-03 15:54 ` [PATCH 2/4 v3] PCI/AER: Modify pci_print_aer() to take log level Fabio M. De Francesco
2025-06-03 20:51   ` Sathyanarayanan Kuppuswamy
2025-06-03 21:23   ` Dave Jiang
2025-06-03 15:54 ` [PATCH 3/4 v3] ACPI: extlog: Trace CPER PCI Express Error Section Fabio M. De Francesco
2025-06-03 21:33   ` Dave Jiang
2025-06-03 21:49   ` Dave Jiang [this message]
2025-06-03 22:18   ` Sathyanarayanan Kuppuswamy
2025-06-04 14:25   ` Zhuo, Qiuxu
2025-06-03 15:54 ` [PATCH 4/4 v3] ACPI: extlog: Trace CPER CXL Protocol " Fabio M. De Francesco
2025-06-03 21:44   ` Dave Jiang
2025-06-03 22:11   ` Sathyanarayanan Kuppuswamy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d37669fc-72e6-48d8-a080-e0353ccc812d@intel.com \
    --to=dave.jiang@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=bhelgaas@google.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave@stgolabs.net \
    --cc=fabio.m.de.francesco@linux.intel.com \
    --cc=ira.weiny@intel.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mahesh@linux.ibm.com \
    --cc=oohall@gmail.com \
    --cc=rafael@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=vishal.l.verma@intel.com \
    --cc=yazen.ghannam@amd.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).