On Wed, 8 Jul 2026, Eric Auger wrote: > On 7/7/26 6:12 PM, Ilpo Järvinen wrote: > > On Tue, 7 Jul 2026, Eric Auger wrote: > > > >> Hi Ilpo, > >> > >> On 12/19/25 6:40 PM, Ilpo Järvinen wrote: > >>> The resource loop in pbus_size_mem() handles optional resources that > >>> are either fully optional (SRIOV and disabled Expansion ROMs) or bridge > >>> windows that may be optional only for a part. The logic is little > >>> inconsistent when it comes to a bridge window that has only optional > >>> children resources as it would be more natural to treat it similar to > >>> any fully optional resource. As resource size should be zero in that > >>> case, it shouldn't cause any bugs but it still seems useful to address > >>> the inconsistency. > >>> > >>> Place the optional size related code of pbus_size_mem() into > >>> pbus_mem_size_optional() and add check into pci_resource_is_optional() > >>> for entirely optional bridge windows. Reorder the logic inside > >>> pbus_mem_size_optional() such that fully optional resources are handled > >>> the same irrespective to whether the resource is a bridge window or > >>> not. > >> > >> This patch seems to introduce a regression when trying to hotplug a > >> virtio-net-pci device behind a XIO3130 downstream port in the following > >> hierarchy. > >> > >> this happens with a v7.2-rc2 guest kernel, on an arm64 guest with qemu vmm. > >> > >> > >> > >> 00:01.0 Host bridge: Red Hat, Inc. QEMU PCIe Expander bridge > >> Subsystem: Red Hat, Inc. Device 1100 > >> > >> |_ 0a:00.0 PCI bridge: Red Hat, Inc. QEMU PCIe Root port > >> Subsystem: Red Hat, Inc. Device 0000 > >> Kernel driver in use: pcieport > >> > >> |_ 0b:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch > >> > >> (Upstream) (rev 02) > >> Kernel driver in use: pcieport > >> > >> |_ 0c:02.0 PCI bridge: Texas Instruments XIO3130 PCI Express > >> Switch (Downstream) (rev 01) > >> Kernel driver in use: pcieport > > > > Hi Eric, > > > > Thanks for the report. > > > > I cannot get much done with the log snippets. The first line with > > difference is a symptom of something that originates from outside of the > > snippet. > > > > Could you please take a log with dyndbg="file drivers/pci/*.c +p" on the > > kernel command line and also include a /proc/iomem dump. Like > > you did now, preferrably take those from both working and failing case so > > I can easily diff them. > > > > -- > > i. > > > > > >> This produces the following trace > >> > >> > >> [ 28.557947] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Card present > >> [ 28.557949] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Link Up > >> [ 29.605376] pci 0000:0d:00.0: [1af4:1041] type 00 class 0x020000 PCIe > >> Endpoint > >> [ 29.605724] pci 0000:0d:00.0: BAR 1 [mem 0x00000000-0x00000fff] > >> [ 29.605765] pci 0000:0d:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit > >> pref] > >> [ 29.605816] pci 0000:0d:00.0: enabling Extended Tags > >> [ 29.606994] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref] to [bus 0d] add_size 100000 add_align 100000 > >> [ 29.606998] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000] to [bus 0d] add_size 100000 add_align 100000 > >> [ 29.607003] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: can't assign; no space > >> [ 29.607005] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: failed to assign > >> [ 29.607007] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: can't assign; no space > >> [ 29.607008] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: failed to assign > >> [ 29.607010] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 29.607012] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 29.607014] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000]: can't assign; no space > >> [ 29.607016] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000]: failed to assign > >> [ 29.607018] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref]: can't assign; no space > >> [ 29.607019] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref]: failed to assign > >> [ 29.607021] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 29.607022] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 29.607025] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> can't assign; no space > >> [ 29.607026] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> failed to assign > >> [ 29.607027] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't > >> assign; no space > >> [ 29.607028] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to > >> assign > >> [ 29.607029] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> can't assign; no space > >> [ 29.607030] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> failed to assign > >> [ 29.607031] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't > >> assign; no space > >> [ 29.607032] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to > >> assign > >> [ 29.607033] pcieport 0000:0c:02.0: PCI bridge to [bus 0d] > >> [ 29.611260] PCI: No. 2 try to assign unassigned res > >> [ 29.611269] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref] to [bus 0d] add_size 100000 add_align 100000 > >> [ 29.611272] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000] to [bus 0d] add_size 100000 add_align 100000 > >> [ 29.611276] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: can't assign; no space > >> [ 29.611277] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: failed to assign > >> [ 29.611278] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: can't assign; no space > >> [ 29.611279] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: failed to assign > >> [ 29.611280] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 29.611280] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 29.611281] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000]: can't assign; no space > >> [ 29.611282] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000]: failed to assign > >> [ 29.611283] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref]: can't assign; no space > >> [ 29.611283] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref]: failed to assign > >> [ 29.611284] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 29.611284] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 29.611286] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> can't assign; no space > >> [ 29.611286] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> failed to assign > >> [ 29.611287] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't > >> assign; no space > >> [ 29.611288] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to > >> assign > >> [ 29.611288] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> can't assign; no space > >> [ 29.611289] pci 0000:0d:00.0: BAR 4 [mem size 0x00004000 64bit pref]: > >> failed to assign > >> [ 29.611289] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: can't > >> assign; no space > >> [ 29.611290] pci 0000:0d:00.0: BAR 1 [mem size 0x00001000]: failed to > >> assign > >> [ 29.611291] pcieport 0000:0c:02.0: PCI bridge to [bus 0d] > >> [ 29.616141] ACPI: \_SB_.L0A2: Enabled at IRQ 37 > >> [ 29.616378] virtio-pci 0000:0d:00.0: virtio_pci: leaving for legacy > >> driver > >> > >> Previous to this commit hotplug was successful: > >> > >> vm-rhel10 login: [ 38.385692] pcieport 0000:0c:02.0: pciehp: > >> Slot(0-1): Button press: will power on in 5 sec > >> [ 38.385798] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Card present > >> [ 38.385799] pcieport 0000:0c:02.0: pciehp: Slot(0-1): Link Up > >> [ 39.553709] pci 0000:0d:00.0: [1af4:1041] type 00 class 0x020000 PCIe > >> Endpoint > >> [ 39.554018] pci 0000:0d:00.0: BAR 1 [mem 0x00000000-0x00000fff] > >> [ 39.554042] pci 0000:0d:00.0: BAR 4 [mem 0x00000000-0x00003fff 64bit > >> pref] > >> [ 39.554099] pci 0000:0d:00.0: enabling Extended Tags > >> [ 39.555202] pcieport 0000:0c:02.0: bridge window [mem size 0x00100000 > >> 64bit pref] to [bus 0d] add_size 100000 add_align 100000 > >> [ 39.555206] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00100000] to [bus 0d] add_size 100000 add_align 100000 > >> [ 39.555212] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: can't assign; no space > >> [ 39.555213] pcieport 0000:0c:02.0: bridge window [mem size > >> 0x00200000]: failed to assign > >> [ 39.555215] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: can't assign; no space > >> [ 39.555216] pcieport 0000:0c:02.0: bridge window [mem size 0x00200000 > >> 64bit pref]: failed to assign > >> [ 39.555218] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 39.555219] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 39.555222] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10a00000-0x10afffff]: assigned > >> [ 39.555224] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10b00000-0x10bfffff 64bit pref]: assigned > >> [ 39.555225] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 39.555227] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 39.555228] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10a00000-0x10afffff]: failed to expand by 0x100000 > >> [ 39.555230] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10a00000-0x10afffff]: failed to add optional 100000 > >> [ 39.555232] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10b00000-0x10bfffff 64bit pref]: failed to expand by 0x100000 > >> [ 39.555234] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10b00000-0x10bfffff 64bit pref]: failed to add optional 100000 > >> [ 39.555236] pci 0000:0d:00.0: BAR 4 [mem 0x10b00000-0x10b03fff 64bit > >> pref]: assigned > >> [ 39.555290] pci 0000:0d:00.0: BAR 1 [mem 0x10a00000-0x10a00fff]: assigned > >> [ 39.555305] pcieport 0000:0c:02.0: PCI bridge to [bus 0d] > >> [ 39.556804] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10a00000-0x10afffff] > >> [ 39.557730] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10b00000-0x10bfffff 64bit pref] > >> [ 39.559629] PCI: No. 2 try to assign unassigned res > >> [ 39.559636] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 39.559638] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 39.559640] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> can't assign; no space > >> [ 39.559642] pcieport 0000:0c:02.0: bridge window [io size 0x1000]: > >> failed to assign > >> [ 39.559644] pcieport 0000:0c:02.0: PCI bridge to [bus 0d] > >> [ 39.561078] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10a00000-0x10afffff] > >> [ 39.562011] pcieport 0000:0c:02.0: bridge window [mem > >> 0x10b00000-0x10bfffff 64bit pref] > >> [ 39.564500] ACPI: \_SB_.L0A2: Enabled at IRQ 37 > >> [ 39.564541] virtio-pci 0000:0d:00.0: enabling device (0000 -> 0002) > >> [ 39.572231] virtio_net virtio2 enp13s0: renamed from eth0 > >> > >> Any clue? > >> > >> Thank you in advance > >> > >> Eric > >> > >> > >> > >> > >> > >> > >> > >>> > >>> Additional motivation for this are the upcoming changes that add > >>> complexity to the optional sizing logic due to Resizable BAR awareness. > >>> The extra logic would exceed any reasonable indentation level if the > >>> optional sizing code is kept within the loop body. > >>> > >>> Signed-off-by: Ilpo Järvinen > >>> --- > >>> drivers/pci/setup-bus.c | 77 +++++++++++++++++++++++++++++------------ > >>> 1 file changed, 54 insertions(+), 23 deletions(-) > >>> > >>> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c > >>> index 3d1d3cefcdba..3fcc7641c374 100644 > >>> --- a/drivers/pci/setup-bus.c > >>> +++ b/drivers/pci/setup-bus.c > >>> @@ -125,15 +125,6 @@ static resource_size_t get_res_add_size(struct list_head *head, > >>> return dev_res ? dev_res->add_size : 0; > >>> } > >>> > >>> -static resource_size_t get_res_add_align(struct list_head *head, > >>> - struct resource *res) > >>> -{ > >>> - struct pci_dev_resource *dev_res; > >>> - > >>> - dev_res = res_to_dev_res(head, res); > >>> - return dev_res ? dev_res->min_align : 0; > >>> -} > >>> - > >>> static void restore_dev_resource(struct pci_dev_resource *dev_res) > >>> { > >>> struct resource *res = dev_res->res; > >>> @@ -386,6 +377,8 @@ bool pci_resource_is_optional(const struct pci_dev *dev, int resno) > >>> return true; > >>> if (resno == PCI_ROM_RESOURCE && !(res->flags & IORESOURCE_ROM_ENABLE)) > >>> return true; > >>> + if (pci_resource_is_bridge_win(resno) && !resource_size(res)) > adding > > && !dev->is_hotplug_bridge makes the hotplug successful. > > > My understanding is that otherwise the hotplug bridge window is > considered as optional and no memoy window is allocated to assign chid > device's BARS > > Please let me know if that makes sense. In the positive I can send a patch. I don't think that is the correct solution. These bridges, have both non-prefetchable and prefetchable windows, but the initial setup only sets the non-prefetchable one to 2M (and nothing more would fit to the associated root bus resource). There's only a single root bus resource that is 2M + a bit more (to fit that BAR0). Now, when sizing the bridge windows, the kernel sizing algorithm just uses the default 2M hotplug reservation to both of those windows as there are not yet any real devices underneath (the default hp reservation is controllable with hpmmiosize/hpmmioprefsize/hpmemsize cmdline parameters). Thus, to fit everything, the root bus resource should be 4M + a bit more for BAR0. However, it looks to me there's also a 4M add_size miscalculation (the downstream bridge window is only 2M per each type): [ 0.048078] pci 0000:0a:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0d] add_size 400000 add_align 100000 [ 0.048079] pci 0000:0a:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b-0d] add_size 400000 add_align 100000 It's almost as if both of the child windows would be summed into it, not just the one with the correct type. Maybe this is caused by the pci_is_root_bus() thing in pbus_select_window_for_type() (which I don't like but cannot currently really get rid of either) and find_bus_resource_of_type() messing things up. There's an attempt in the patch below to address that problem. But, even if the sizing would calculate 2M there, 2M + 2M windows are not going to fit. This works what looks like by chance in the older kernel, which (illogically) picks 1M required size for the both window (probably that comes from min alignment) which magically just happens to fit to the ~2M root bus resource. So to solve that issue, you could try with hpmemsize=1M on the kernel's cmndline to see if it elimnates those failures together with the patch below. Why the system setup doesn't create large enough root bus resource for it is way beyond my qemu and/or aarch64 knowledge and it seems to be where the problem kind of originates from. -- [PATCH 1/1] PCI: Fix mem resource type matching pbus_select_window_for_type() handles root bus differently by calling find_bus_resource_of_type() with different sets of flags to handle memory window type fallbacks. The first case is intended to match only exactly, but if type is IORESOURCE_MEM, the check in find_bus_resource_of_type() will not include IORESOURCE_MEM_64 in the mask. As a result, wrong resource may be selected even if a more precise match is available. Similarly for the other case with IORESOURCE_PREFETCH. Separate mask handling from the type of the particular resource to ensure the matching progresses from finer-grained matches towards more allowing matches. Signed-off-by: Ilpo Järvinen --- drivers/pci/setup-bus.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index c0a949f2c995..912a30211505 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -209,17 +209,21 @@ static struct resource *pbus_select_window_for_type(struct pci_bus *bus, return NULL; if (pci_is_root_bus(bus)) { - win = find_bus_resource_of_type(bus, type, type); + unsigned long mask = PCI_RES_TYPE_MASK; + + win = find_bus_resource_of_type(bus, mask, type); if (win) return win; type &= ~IORESOURCE_MEM_64; - win = find_bus_resource_of_type(bus, type, type); + mask &= ~IORESOURCE_MEM_64; + win = find_bus_resource_of_type(bus, mask, type); if (win) return win; type &= ~IORESOURCE_PREFETCH; - return find_bus_resource_of_type(bus, type, type); + mask &= ~IORESOURCE_PREFETCH; + return find_bus_resource_of_type(bus, mask, type); } switch (iores_type) { base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482 -- 2.47.3