From: Heiner Kallweit <hkallweit1@gmail.com>
To: Frederick Lawler <fred@fredlawl.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Greg KH <gregkh@linuxfoundation.org>,
Rajat Jain <rajatja@google.com>
Cc: "linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: [PATCH v7 5/5] PCI/ASPM: Remove Kconfig option PCIEASPM_DEBUG and related code
Date: Sat, 5 Oct 2019 14:08:52 +0200 [thread overview]
Message-ID: <ec935d8e-c084-3938-f1d1-748617596b25@gmail.com> (raw)
In-Reply-To: <e1c28e25-df18-16e1-3e9f-933f613ea858@gmail.com>
Now that we have sysfs attributes for enabling/disabling the individual
ASPM link states, this debug code isn't needed any longer. Removing this
debug code has been discussed for quite some time, see e.g. [0].
[0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v6:
- add discussion link to commit message
---
drivers/pci/pci-sysfs.c | 3 --
drivers/pci/pci.h | 8 ---
drivers/pci/pcie/Kconfig | 7 ---
drivers/pci/pcie/aspm.c | 105 ---------------------------------------
4 files changed, 123 deletions(-)
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 0e76c02e0..92bf1b1ce 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1330,7 +1330,6 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
int retval;
pcie_vpd_create_sysfs_dev_files(dev);
- pcie_aspm_create_sysfs_dev_files(dev);
if (dev->reset_fn) {
retval = device_create_file(&dev->dev, &dev_attr_reset);
@@ -1340,7 +1339,6 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
return 0;
error:
- pcie_aspm_remove_sysfs_dev_files(dev);
pcie_vpd_remove_sysfs_dev_files(dev);
return retval;
}
@@ -1416,7 +1414,6 @@ int __must_check pci_create_sysfs_dev_files(struct pci_dev *pdev)
static void pci_remove_capabilities_sysfs(struct pci_dev *dev)
{
pcie_vpd_remove_sysfs_dev_files(dev);
- pcie_aspm_remove_sysfs_dev_files(dev);
if (dev->reset_fn) {
device_remove_file(&dev->dev, &dev_attr_reset);
dev->reset_fn = 0;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index b2cd21e8c..ae231e3cd 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -541,14 +541,6 @@ static inline void pcie_aspm_pm_state_change(struct pci_dev *pdev) { }
static inline void pcie_aspm_powersave_config_link(struct pci_dev *pdev) { }
#endif
-#ifdef CONFIG_PCIEASPM_DEBUG
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev);
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev);
-#else
-static inline void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev) { }
-static inline void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev) { }
-#endif
-
#ifdef CONFIG_PCIE_ECRC
void pcie_set_ecrc_checking(struct pci_dev *dev);
void pcie_ecrc_get_policy(char *str);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 362eb8cfa..a2e862d4e 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -79,13 +79,6 @@ config PCIEASPM
When in doubt, say Y.
-config PCIEASPM_DEBUG
- bool "Debug PCI Express ASPM"
- depends on PCIEASPM
- help
- This enables PCI Express ASPM debug support. It will add per-device
- interface to control ASPM.
-
choice
prompt "Default ASPM policy"
default PCIEASPM_DEFAULT
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 05ea02abf..896299a6b 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -1221,111 +1221,6 @@ bool pcie_aspm_enabled(struct pci_dev *pdev)
}
EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
-#ifdef CONFIG_PCIEASPM_DEBUG
-static ssize_t link_state_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct pci_dev *pci_device = to_pci_dev(dev);
- struct pcie_link_state *link_state = pci_device->link_state;
-
- return sprintf(buf, "%d\n", link_state->aspm_enabled);
-}
-
-static ssize_t link_state_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t n)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct pcie_link_state *link, *root = pdev->link_state->root;
- u32 state;
-
- if (aspm_disabled)
- return -EPERM;
-
- if (kstrtouint(buf, 10, &state))
- return -EINVAL;
- if ((state & ~ASPM_STATE_ALL) != 0)
- return -EINVAL;
-
- down_read(&pci_bus_sem);
- mutex_lock(&aspm_lock);
- list_for_each_entry(link, &link_list, sibling) {
- if (link->root != root)
- continue;
- pcie_config_aspm_link(link, state);
- }
- mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
- return n;
-}
-
-static ssize_t clk_ctl_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct pci_dev *pci_device = to_pci_dev(dev);
- struct pcie_link_state *link_state = pci_device->link_state;
-
- return sprintf(buf, "%d\n", link_state->clkpm_enabled);
-}
-
-static ssize_t clk_ctl_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t n)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- bool state;
-
- if (strtobool(buf, &state))
- return -EINVAL;
-
- down_read(&pci_bus_sem);
- mutex_lock(&aspm_lock);
- pcie_set_clkpm_nocheck(pdev->link_state, state);
- mutex_unlock(&aspm_lock);
- up_read(&pci_bus_sem);
-
- return n;
-}
-
-static DEVICE_ATTR_RW(link_state);
-static DEVICE_ATTR_RW(clk_ctl);
-
-static char power_group[] = "power";
-void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
-{
- struct pcie_link_state *link_state = pdev->link_state;
-
- if (!link_state)
- return;
-
- if (link_state->aspm_support)
- sysfs_add_file_to_group(&pdev->dev.kobj,
- &dev_attr_link_state.attr, power_group);
- if (link_state->clkpm_capable)
- sysfs_add_file_to_group(&pdev->dev.kobj,
- &dev_attr_clk_ctl.attr, power_group);
-}
-
-void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
-{
- struct pcie_link_state *link_state = pdev->link_state;
-
- if (!link_state)
- return;
-
- if (link_state->aspm_support)
- sysfs_remove_file_from_group(&pdev->dev.kobj,
- &dev_attr_link_state.attr, power_group);
- if (link_state->clkpm_capable)
- sysfs_remove_file_from_group(&pdev->dev.kobj,
- &dev_attr_clk_ctl.attr, power_group);
-}
-#endif
-
static ssize_t aspm_attr_show_common(struct device *dev,
struct device_attribute *attr,
char *buf, u8 state)
--
2.23.0
next prev parent reply other threads:[~2019-10-05 12:09 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-05 12:02 [PATCH v7 0/5] PCI/ASPM: Add sysfs attributes for controlling ASPM Heiner Kallweit
2019-10-05 12:03 ` [PATCH v7 2/5] PCI/ASPM: Allow to re-enable Clock PM Heiner Kallweit
2019-10-05 12:04 ` [PATCH v7 1/5] PCI/ASPM: Add L1 sub-state support to pci_disable_link_state Heiner Kallweit
2019-10-05 12:07 ` [PATCH v7 3/5] PCI/ASPM: Add and use helper pcie_aspm_get_link Heiner Kallweit
2019-10-08 1:51 ` Bjorn Helgaas
2019-10-05 12:07 ` [PATCH v7 4/5] PCI/ASPM: Add sysfs attributes for controlling ASPM link states Heiner Kallweit
2019-10-08 1:53 ` Bjorn Helgaas
2019-11-21 20:49 ` Bjorn Helgaas
2019-11-21 21:03 ` Rajat Jain
2019-11-21 21:10 ` Greg KH
2019-11-21 23:04 ` Bjorn Helgaas
2019-11-24 17:02 ` Greg KH
2019-10-05 12:08 ` Heiner Kallweit [this message]
2019-10-08 22:10 ` [PATCH v7 0/5] PCI/ASPM: Add sysfs attributes for controlling ASPM Bjorn Helgaas
2019-10-10 13:22 ` Bjorn Helgaas
2019-10-10 20:45 ` Heiner Kallweit
2019-10-15 20:30 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec935d8e-c084-3938-f1d1-748617596b25@gmail.com \
--to=hkallweit1@gmail.com \
--cc=bhelgaas@google.com \
--cc=fred@fredlawl.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-pci@vger.kernel.org \
--cc=rajatja@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).