From: sashiko-bot@kernel.org
To: "Chengwen Feng" <fengchengwen@huawei.com>
Cc: kvm@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH v21 09/13] vfio/pci: Add basic NO-ST TPH VFIO device feature support
Date: Wed, 18 Nov 2026 10:51:54 +0000 [thread overview]
Message-ID: <sashiko-outbox-220757@kernel.org> (raw)
In-Reply-To: <20261118091238.45992-10-fengchengwen@huawei.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] vfio/pci: vfio_tph_config_write() fails when
pdev->tph_enabled is already set
--
commit e4125940aba8b4e82c51ed4d75d938a51d421022
Author: Chengwen Feng <fengchengwen@huawei.com>
vfio/pci: Add basic NO-ST TPH VFIO device feature support
This commit adds VFIO PCI support for PCIe TPH in NO-ST mode, virtualizing
the TPH extended capability and exposing the VFIO_DEVICE_FEATURE_TPH ioctl
for userspace opt-in.
> diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c
> index 9914f3ac69aef..3946ed2ec0cfe 100644
> --- a/drivers/vfio/pci/vfio_pci_config.c
> +++ b/drivers/vfio/pci/vfio_pci_config.c
[ ... ]
> +static int vfio_tph_config_write(struct vfio_pci_core_device *vdev, int pos,
> + int count, struct perm_bits *perm,
> + int offset, __le32 val)
> +{
> + u16 start = vfio_find_cap_start(vdev, pos);
> + struct pci_dev *pdev = vdev->pdev;
> + u32 org_ctrl, new_ctrl, cap;
> + u8 mode, req, org_req;
> + __le32 ctrl_val = 0;
> + u16 cmd;
> + int ret;
> +
> + if (!vdev->tph_opt_in || offset >= PCI_TPH_BASE_SIZEOF ||
> + offset < PCI_TPH_CTRL)
> + return count;
> +
> + cmd = vfio_pci_memory_lock_and_enable(vdev);
> +
> + /*
> + * Synchronize the CTRL value of the hardware to the virt. Otherwise,
> + * the value will be inconsistent when the device is reset.
> + */
> + vfio_user_config_read(pdev, start + PCI_TPH_CTRL, &ctrl_val, 4);
> + vfio_default_config_write(vdev, start + PCI_TPH_CTRL, 4, perm,
> + PCI_TPH_CTRL, ctrl_val);
> + org_ctrl = le32_to_cpu(ctrl_val);
> +
> + /* Do write operation to virt. */
> + ret = vfio_default_config_write(vdev, pos, count, perm, offset, val);
> + if (ret != count)
> + goto out;
> +
> + /* Reads the TPH_CTRL value after the write operation. */
> + new_ctrl = le32_to_cpu(*(__le32 *)&vdev->vconfig[start + PCI_TPH_CTRL]);
> + if (new_ctrl == org_ctrl)
> + goto out; /* Exit because there is no change. */
> +
> + cap = vdev->tph_vcap;
> + mode = FIELD_GET(PCI_TPH_CTRL_MODE_SEL_MASK, new_ctrl);
> + req = FIELD_GET(PCI_TPH_CTRL_REQ_EN_MASK, new_ctrl);
> + if (mode != PCI_TPH_ST_NS_MODE || !(cap & (1u << mode)) ||
> + req == 0x2 /* reserved */ ||
> + (req == PCI_TPH_REQ_EXT_TPH && !(cap & PCI_TPH_CAP_EXT_TPH)))
> + goto out; /* Drop invalid or unsupported write value. */
> +
> + org_req = FIELD_GET(PCI_TPH_CTRL_REQ_EN_MASK, org_ctrl);
> + if (req == org_req)
> + goto out; /* Only care about requester enable. */
> +
> + if (req == PCI_TPH_REQ_TPH_ONLY || req == PCI_TPH_REQ_EXT_TPH)
> + pcie_enable_tph_ext(pdev, mode, req);
> + else if (req == PCI_TPH_REQ_DISABLE)
> + pcie_disable_tph(vdev->pdev);
[Severity: Medium]
Does pcie_enable_tph_ext() fail here if pdev->tph_enabled is already set?
pcie_enable_tph_ext() returns -EBUSY whenever pdev->tph_enabled is 1, and
its return value is ignored. If userspace switches directly between
PCI_TPH_REQ_TPH_ONLY and PCI_TPH_REQ_EXT_TPH without an intermediate
PCI_TPH_REQ_DISABLE write, the hardware PCI_TPH_CTRL register is never
updated.
Similarly, if a device reset clears the hardware PCI_TPH_CTRL register to 0
while pdev->tph_enabled remains 1, subsequent writes of PCI_TPH_REQ_TPH_ONLY
or PCI_TPH_REQ_EXT_TPH fail with -EBUSY, and writing PCI_TPH_REQ_DISABLE
exits early at new_ctrl == org_ctrl without calling pcie_disable_tph(),
leaving TPH unable to be re-enabled.
Calling pcie_disable_tph(pdev) before pcie_enable_tph_ext() when
pdev->tph_enabled is set would avoid both issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261118091238.45992-1-fengchengwen@huawei.com?part=9
next prev parent reply other threads:[~2026-11-18 10:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 9:12 [PATCH v21 00/13] vfio/pci: Add PCIe TPH support Chengwen Feng
2026-11-18 9:12 ` [PATCH v21 01/13] PCI/TPH: Fix pcie_tph_get_st_table_loc() field extraction Chengwen Feng
2026-11-18 9:29 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 02/13] PCI/TPH: Fix tph_enabled concurrent update race by bitfield packing Chengwen Feng
2026-11-18 9:38 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 03/13] PCI/TPH: Cache negotiated max requester type at probe time Chengwen Feng
2026-11-18 9:45 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 04/13] PCI/TPH: Refactor pcie_enable_tph and add requester variant Chengwen Feng
2026-11-18 9:48 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 05/13] PCI/TPH: Refactor pcie_tph_get_cpu_st & " Chengwen Feng
2026-11-18 9:53 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 06/13] PCI/TPH: Add macros to check standard and extended TPH support Chengwen Feng
2026-11-18 10:06 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 07/13] PCI/TPH: Add pcie_tph_set_st_entries() batch ST entry programming helper Chengwen Feng
2026-11-18 10:15 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 08/13] PCI/TPH: Add pci_tph_dsm_supported() helper to detect device TPH ST _DSM Chengwen Feng
2026-11-18 10:29 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 09/13] vfio/pci: Add basic NO-ST TPH VFIO device feature support Chengwen Feng
2026-11-18 10:51 ` sashiko-bot [this message]
2026-11-18 9:12 ` [PATCH v21 10/13] vfio/pci: Add IV-ST TPH policy and TPH_PROGRAM batch programming support Chengwen Feng
2026-11-18 11:21 ` sashiko-bot
2026-11-18 9:12 ` [PATCH v21 11/13] vfio/pci: Add DS-ST TPH policy and TPH_RESOLVE capability Chengwen Feng
2026-11-18 9:12 ` [PATCH v21 12/13] vfio/pci: Reset PCIe TPH state on device open and close Chengwen Feng
2026-11-18 9:12 ` [PATCH v21 13/13] vfio/pci: Expose per-device TPH state via debugfs Chengwen Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-220757@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=fengchengwen@huawei.com \
--cc=kvm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox