From: Thomas Renninger <trenn@suse.de>
Cc: Thomas Renninger <trenn@suse.de>,
Robert Schoene <robert.schoene@tu-dresden.de>,
Jean Pihet <j-pihet@ti.com>,
Arjan van de Ven <arjan@linux.intel.com>,
Ingo Molnar <mingo@elte.hu>, Len Brown <lenb@kernel.org>,
linux-pm@lists.linux-foundation.org, linux-acpi@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
linux-omap@vger.kernel.org
Subject: [PATCH 3/8] X86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
Date: Thu, 2 Dec 2010 17:42:23 +0100 [thread overview]
Message-ID: <1291308148-28628-4-git-send-email-trenn@suse.de> (raw)
In-Reply-To: <1291308148-28628-3-git-send-email-trenn@suse.de>
Currently intel_idle and acpi_idle driver show double cpu_idle "exit idle"
events -> this patch fixes it and makes cpu_idle events throwing less complex.
It also introduces cpu_idle events for all architectures which use
the cpuidle subsystem, namely:
- arch/arm/mach-at91/cpuidle.c
- arch/arm/mach-davinci/cpuidle.c
- arch/arm/mach-kirkwood/cpuidle.c
- arch/arm/mach-omap2/cpuidle34xx.c
- arch/drivers/acpi/processor_idle.c (for all cases, not only mwait)
- arch/x86/kernel/process.c (did throw events before, but was a mess)
- drivers/idle/intel_idle.c (did throw events before)
Convention should be:
Fire cpu_idle events inside the current pm_idle function (not somewhere
down the the callee tree) to keep things easy.
Current possible pm_idle functions in X86:
c1e_idle, poll_idle, cpuidle_idle_call, mwait_idle, default_idle
-> this is really easy is now.
This affects userspace:
The type field of the cpu_idle power event can now direclty get
mapped to:
/sys/devices/system/cpu/cpuX/cpuidle/stateX/{name,desc,usage,time,...}
instead of throwing very CPU/mwait specific values.
This change is not visible for the intel_idle driver.
For the acpi_idle driver it should only be visible if the vendor
misses out C-states in his BIOS.
Another (perf timechart) patch reads out cpuidle info of cpu_idle
events from:
/sys/.../cpuidle/stateX/*, then the cpuidle events are mapped
to the correct C-/cpuidle state again, even if e.g. vendors miss
out C-states in their BIOS and for example only export C1 and C3.
-> everything is fine.
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Robert Schoene <robert.schoene@tu-dresden.de>
CC: Jean Pihet <j-pihet@ti.com>
CC: Arjan van de Ven <arjan@linux.intel.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Len Brown <lenb@kernel.org>
CC: linux-pm@lists.linux-foundation.org
CC: linux-acpi@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-perf-users@vger.kernel.org
CC: linux-omap@vger.kernel.org
---
arch/x86/kernel/process.c | 6 ++++--
arch/x86/kernel/process_32.c | 4 ----
arch/x86/kernel/process_64.c | 6 ------
drivers/cpuidle/cpuidle.c | 10 ++++++++--
drivers/idle/intel_idle.c | 2 --
5 files changed, 12 insertions(+), 16 deletions(-)
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 155d975..b618548 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -387,6 +387,8 @@ void default_idle(void)
else
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
+ trace_power_end(smp_processor_id());
+ trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
} else {
local_irq_enable();
/* loop is done by the caller */
@@ -444,8 +446,6 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
*/
void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
{
- trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id());
- trace_cpu_idle((ax>>4)+1, smp_processor_id());
if (!need_resched()) {
if (cpu_has(¤t_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
clflush((void *)¤t_thread_info()->flags);
@@ -472,6 +472,8 @@ static void mwait_idle(void)
__sti_mwait(0, 0);
else
local_irq_enable();
+ trace_power_end(smp_processor_id());
+ trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
} else
local_irq_enable();
}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 4b9befa..8d12878 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -57,8 +57,6 @@
#include <asm/syscalls.h>
#include <asm/debugreg.h>
-#include <trace/events/power.h>
-
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
/*
@@ -113,8 +111,6 @@ void cpu_idle(void)
stop_critical_timings();
pm_idle();
start_critical_timings();
- trace_power_end(smp_processor_id());
- trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
}
tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 4c818a7..bd387e8 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -51,8 +51,6 @@
#include <asm/syscalls.h>
#include <asm/debugreg.h>
-#include <trace/events/power.h>
-
asmlinkage extern void ret_from_fork(void);
DEFINE_PER_CPU(unsigned long, old_rsp);
@@ -141,10 +139,6 @@ void cpu_idle(void)
pm_idle();
start_critical_timings();
- trace_power_end(smp_processor_id());
- trace_cpu_idle(PWR_EVENT_EXIT,
- smp_processor_id());
-
/* In many cases the interrupt that ended idle
has already called exit_idle. But some idle
loops can be woken up without interrupt. */
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 99cc8fc..4649495 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -96,7 +96,15 @@ static void cpuidle_idle_call(void)
/* enter the state and update stats */
dev->last_state = target_state;
+
+ trace_power_start(POWER_CSTATE, next_state, dev->cpu);
+ trace_cpu_idle(next_state, dev->cpu);
+
dev->last_residency = target_state->enter(dev, target_state);
+
+ trace_power_end(dev->cpu);
+ trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
+
if (dev->last_state)
target_state = dev->last_state;
@@ -106,8 +114,6 @@ static void cpuidle_idle_call(void)
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev);
- trace_power_end(smp_processor_id());
- trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
}
/**
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index ba5134f..60414ae 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -220,8 +220,6 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
kt_before = ktime_get_real();
stop_critical_timings();
- trace_power_start(POWER_CSTATE, (eax >> 4) + 1, cpu);
- trace_cpu_idle((eax >> 4) + 1, cpu);
if (!need_resched()) {
__monitor((void *)¤t_thread_info()->flags, 0, 0);
--
1.6.0.2
next parent reply other threads:[~2010-12-02 16:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1291308148-28628-1-git-send-email-trenn@suse.de>
[not found] ` <1291308148-28628-2-git-send-email-trenn@suse.de>
[not found] ` <1291308148-28628-3-git-send-email-trenn@suse.de>
2010-12-02 16:42 ` Thomas Renninger [this message]
[not found] ` <1291308148-28628-5-git-send-email-trenn@suse.de>
[not found] ` <1291308148-28628-6-git-send-email-trenn@suse.de>
[not found] ` <1291308148-28628-7-git-send-email-trenn@suse.de>
2010-12-02 16:42 ` [PATCH 7/8] perf timechart: Map power:cpu_idle events to the corresponding cpuidle state Thomas Renninger
2010-12-02 16:42 ` [PATCH 8/8] perf: timechart: Fix memleak Thomas Renninger
2010-12-02 16:51 ` [PATCH 7/8] perf timechart: Map power:cpu_idle events to the corresponding cpuidle state Thomas Renninger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291308148-28628-4-git-send-email-trenn@suse.de \
--to=trenn@suse.de \
--cc=arjan@linux.intel.com \
--cc=j-pihet@ti.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=mingo@elte.hu \
--cc=robert.schoene@tu-dresden.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).