From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>, Namhyung Kim <namhyung@kernel.org>,
Clark Williams <williams@redhat.com>,
linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>,
Ravi Bangoria <ravi.bangoria@linux.ibm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Jiri Olsa <jolsa@redhat.com>,
Madhavan Srinivasan <maddy@linux.vnet.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Peter Zijlstra <peterz@infradead.org>,
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>,
Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH 09/44] perf vendor events: Remove P8 HW events which are not supported
Date: Thu, 21 Mar 2019 15:51:07 -0300 [thread overview]
Message-ID: <20190321185142.11441-10-acme@kernel.org> (raw)
In-Reply-To: <20190321185142.11441-1-acme@kernel.org>
From: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
This patch is to remove following hardware events from JSON file which
are not supported on POWER8.
pm_co_disp_fail
pm_co_tm_sc_footprint
pm_iside_disp
pm_iside_disp_fail
pm_iside_disp_fail_other
pm_iside_mru_touch
pm_l2_castout_mod
pm_l2_castout_shr
pm_l2_dc_inv
pm_l2_disp_all_l2miss
pm_l2_grp_guess_correct
pm_l2_grp_guess_wrong
pm_l2_ic_inv
pm_l2_inst
pm_l2_inst_miss
pm_l2_ld
pm_l2_ld_disp
pm_l2_ld_hit
pm_l2_ld_miss
pm_l2_loc_guess_correct
pm_l2_loc_guess_wrong
pm_l2_rcld_disp
pm_l2_rcld_disp_fail_addr
pm_l2_rcld_disp_fail_other
pm_l2_rcst_disp
pm_l2_rcst_disp_fail_addr
pm_l2_rcst_disp_fail_other
pm_l2_rc_st_done
pm_l2_rty_ld
pm_l2_sn_m_rd_done
pm_l2_sn_m_wr_done
pm_l2_sn_sx_i_done
pm_l2_st_disp
pm_l2_st_hit
pm_l2_sys_guess_correct
pm_l2_sys_guess_wrong
pm_l2_sys_pump
pm_l3_ci_hit
pm_l3_ci_miss
pm_l3_cinj
pm_l3_co
pm_l3_co_lco
pm_l3_grp_guess_correct
pm_l3_grp_guess_wrong_high
pm_l3_grp_guess_wrong_low
pm_l3_hit
pm_l3_l2_co_hit
pm_l3_l2_co_miss
pm_l3_lat_ci_hit
pm_l3_lat_ci_miss
pm_l3_ld_hit
pm_l3_ld_miss
pm_l3_loc_guess_correct
pm_l3_loc_guess_wrong
pm_l3_miss
pm_l3_p0_co_l31
pm_l3_p0_co_mem
pm_l3_p0_co_rty
pm_l3_p0_grp_pump
pm_l3_p0_lco_data
pm_l3_p0_lco_no_data
pm_l3_p0_lco_rty
pm_l3_p0_node_pump
pm_l3_p0_pf_rty
pm_l3_p0_sn_hit
pm_l3_p0_sn_inv
pm_l3_p0_sn_miss
pm_l3_p0_sys_pump
pm_l3_p1_co_l31
pm_l3_p1_co_mem
pm_l3_p1_co_rty
pm_l3_p1_grp_pump
pm_l3_p1_lco_data
pm_l3_p1_lco_no_data
pm_l3_p1_lco_rty
pm_l3_p1_node_pump
pm_l3_p1_pf_rty
pm_l3_p1_sn_hit
pm_l3_p1_sn_inv
pm_l3_p1_sn_miss
pm_l3_p1_sys_pump
pm_l3_pf_hit_l3
pm_l3_sys_guess_correct
pm_l3_sys_guess_wrong
pm_l3_trans_pf
pm_l3_wi0_busy
pm_l3_wi_usage
pm_non_tm_rst_sc
pm_rd_clearing_sc
pm_rd_forming_sc
pm_rd_hit_pf
pm_snp_tm_hit_m
pm_snp_tm_hit_t
pm_st_caused_fail
pm_tm_cam_overflow
pm_tm_cap_overflow
pm_tm_fav_caused_fail
pm_tm_ld_caused_fail
pm_tm_ld_conf
pm_tm_rst_sc
pm_tm_sc_co
pm_tm_st_caused_fail
pm_tm_st_conf
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: 2a81fa3bb5ed ("perf vendor events: Add power8 PMU events")
Link: http://lkml.kernel.org/r/154953186583.11022.14819560028300370163.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
.../pmu-events/arch/powerpc/power8/other.json | 594 ------------------
1 file changed, 594 deletions(-)
diff --git a/tools/perf/pmu-events/arch/powerpc/power8/other.json b/tools/perf/pmu-events/arch/powerpc/power8/other.json
index 704302c3e67d..9dc2f6b70354 100644
--- a/tools/perf/pmu-events/arch/powerpc/power8/other.json
+++ b/tools/perf/pmu-events/arch/powerpc/power8/other.json
@@ -347,18 +347,6 @@
"BriefDescription": "CO mach 0 Busy. Used by PMU to sample ave RC livetime(mach0 used as sample point)",
"PublicDescription": ""
},
- {,
- "EventCode": "0x517082",
- "EventName": "PM_CO_DISP_FAIL",
- "BriefDescription": "CO dispatch failed due to all CO machines being busy",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x527084",
- "EventName": "PM_CO_TM_SC_FOOTPRINT",
- "BriefDescription": "L2 did a cleanifdirty CO to the L3 (ie created an SC line in the L3)",
- "PublicDescription": ""
- },
{,
"EventCode": "0x3608a",
"EventName": "PM_CO_USAGE",
@@ -1577,36 +1565,12 @@
"BriefDescription": "A Page Table Entry was loaded into the TLB with Shared (S) data from another core's L3 on the same chip due to a instruction side request",
"PublicDescription": ""
},
- {,
- "EventCode": "0x617082",
- "EventName": "PM_ISIDE_DISP",
- "BriefDescription": "All i-side dispatch attempts",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x627084",
- "EventName": "PM_ISIDE_DISP_FAIL",
- "BriefDescription": "All i-side dispatch attempts that failed due to a addr collision with another machine",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x627086",
- "EventName": "PM_ISIDE_DISP_FAIL_OTHER",
- "BriefDescription": "All i-side dispatch attempts that failed due to a reason other than addrs collision",
- "PublicDescription": ""
- },
{,
"EventCode": "0x4608e",
"EventName": "PM_ISIDE_L2MEMACC",
"BriefDescription": "valid when first beat of data comes in for an i-side fetch where data came from mem(or L4)",
"PublicDescription": ""
},
- {,
- "EventCode": "0x44608e",
- "EventName": "PM_ISIDE_MRU_TOUCH",
- "BriefDescription": "Iside L2 MRU touch",
- "PublicDescription": ""
- },
{,
"EventCode": "0x30ac",
"EventName": "PM_ISU_REF_FX0",
@@ -1733,222 +1697,36 @@
"BriefDescription": "Instruction Demand sectors wriittent into IL1",
"PublicDescription": ""
},
- {,
- "EventCode": "0x417080",
- "EventName": "PM_L2_CASTOUT_MOD",
- "BriefDescription": "L2 Castouts - Modified (M, Mu, Me)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x417082",
- "EventName": "PM_L2_CASTOUT_SHR",
- "BriefDescription": "L2 Castouts - Shared (T, Te, Si, S)",
- "PublicDescription": ""
- },
{,
"EventCode": "0x27084",
"EventName": "PM_L2_CHIP_PUMP",
"BriefDescription": "RC requests that were local on chip pump attempts",
"PublicDescription": ""
},
- {,
- "EventCode": "0x427086",
- "EventName": "PM_L2_DC_INV",
- "BriefDescription": "Dcache invalidates from L2",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x44608c",
- "EventName": "PM_L2_DISP_ALL_L2MISS",
- "BriefDescription": "All successful Ld/St dispatches for this thread that were an L2miss",
- "PublicDescription": ""
- },
{,
"EventCode": "0x27086",
"EventName": "PM_L2_GROUP_PUMP",
"BriefDescription": "RC requests that were on Node Pump attempts",
"PublicDescription": ""
},
- {,
- "EventCode": "0x626084",
- "EventName": "PM_L2_GRP_GUESS_CORRECT",
- "BriefDescription": "L2 guess grp and guess was correct (data intra-6chip AND ^on-chip)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x626086",
- "EventName": "PM_L2_GRP_GUESS_WRONG",
- "BriefDescription": "L2 guess grp and guess was not correct (ie data on-chip OR beyond-6chip)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x427084",
- "EventName": "PM_L2_IC_INV",
- "BriefDescription": "Icache Invalidates from L2",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x436088",
- "EventName": "PM_L2_INST",
- "BriefDescription": "All successful I-side dispatches for this thread (excludes i_l2mru_tch reqs)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x43608a",
- "EventName": "PM_L2_INST_MISS",
- "BriefDescription": "All successful i-side dispatches that were an L2miss for this thread (excludes i_l2mru_tch reqs)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x416080",
- "EventName": "PM_L2_LD",
- "BriefDescription": "All successful D-side Load dispatches for this thread",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x437088",
- "EventName": "PM_L2_LD_DISP",
- "BriefDescription": "All successful load dispatches",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x43708a",
- "EventName": "PM_L2_LD_HIT",
- "BriefDescription": "All successful load dispatches that were L2 hits",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x426084",
- "EventName": "PM_L2_LD_MISS",
- "BriefDescription": "All successful D-Side Load dispatches that were an L2miss for this thread",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x616080",
- "EventName": "PM_L2_LOC_GUESS_CORRECT",
- "BriefDescription": "L2 guess loc and guess was correct (ie data local)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x616082",
- "EventName": "PM_L2_LOC_GUESS_WRONG",
- "BriefDescription": "L2 guess loc and guess was not correct (ie data not on chip)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x516080",
- "EventName": "PM_L2_RCLD_DISP",
- "BriefDescription": "L2 RC load dispatch attempt",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x516082",
- "EventName": "PM_L2_RCLD_DISP_FAIL_ADDR",
- "BriefDescription": "L2 RC load dispatch attempt failed due to address collision with RC/CO/SN/SQ",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x526084",
- "EventName": "PM_L2_RCLD_DISP_FAIL_OTHER",
- "BriefDescription": "L2 RC load dispatch attempt failed due to other reasons",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x536088",
- "EventName": "PM_L2_RCST_DISP",
- "BriefDescription": "L2 RC store dispatch attempt",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x53608a",
- "EventName": "PM_L2_RCST_DISP_FAIL_ADDR",
- "BriefDescription": "L2 RC store dispatch attempt failed due to address collision with RC/CO/SN/SQ",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x54608c",
- "EventName": "PM_L2_RCST_DISP_FAIL_OTHER",
- "BriefDescription": "L2 RC store dispatch attempt failed due to other reasons",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x537088",
- "EventName": "PM_L2_RC_ST_DONE",
- "BriefDescription": "RC did st to line that was Tx or Sx",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x63708a",
- "EventName": "PM_L2_RTY_LD",
- "BriefDescription": "RC retries on PB for any load from core",
- "PublicDescription": ""
- },
{,
"EventCode": "0x3708a",
"EventName": "PM_L2_RTY_ST",
"BriefDescription": "RC retries on PB for any store from core",
"PublicDescription": ""
},
- {,
- "EventCode": "0x54708c",
- "EventName": "PM_L2_SN_M_RD_DONE",
- "BriefDescription": "SNP dispatched for a read and was M",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x54708e",
- "EventName": "PM_L2_SN_M_WR_DONE",
- "BriefDescription": "SNP dispatched for a write and was M",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x53708a",
- "EventName": "PM_L2_SN_SX_I_DONE",
- "BriefDescription": "SNP dispatched and went from Sx or Tx to Ix",
- "PublicDescription": ""
- },
{,
"EventCode": "0x17080",
"EventName": "PM_L2_ST",
"BriefDescription": "All successful D-side store dispatches for this thread",
"PublicDescription": ""
},
- {,
- "EventCode": "0x44708c",
- "EventName": "PM_L2_ST_DISP",
- "BriefDescription": "All successful store dispatches",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x44708e",
- "EventName": "PM_L2_ST_HIT",
- "BriefDescription": "All successful store dispatches that were L2Hits",
- "PublicDescription": ""
- },
{,
"EventCode": "0x17082",
"EventName": "PM_L2_ST_MISS",
"BriefDescription": "All successful D-side store dispatches for this thread that were L2 Miss",
"PublicDescription": ""
},
- {,
- "EventCode": "0x636088",
- "EventName": "PM_L2_SYS_GUESS_CORRECT",
- "BriefDescription": "L2 guess sys and guess was correct (ie data beyond-6chip)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x63608a",
- "EventName": "PM_L2_SYS_GUESS_WRONG",
- "BriefDescription": "L2 guess sys and guess was not correct (ie data ^beyond-6chip)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x617080",
- "EventName": "PM_L2_SYS_PUMP",
- "BriefDescription": "RC requests that were system pump attempts",
- "PublicDescription": ""
- },
{,
"EventCode": "0x1e05e",
"EventName": "PM_L2_TM_REQ_ABORT",
@@ -1961,36 +1739,12 @@
"BriefDescription": "TM marked store abort",
"PublicDescription": ""
},
- {,
- "EventCode": "0x23808a",
- "EventName": "PM_L3_CINJ",
- "BriefDescription": "l3 ci of cache inject",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x128084",
- "EventName": "PM_L3_CI_HIT",
- "BriefDescription": "L3 Castins Hit (total count",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x128086",
- "EventName": "PM_L3_CI_MISS",
- "BriefDescription": "L3 castins miss (total count",
- "PublicDescription": ""
- },
{,
"EventCode": "0x819082",
"EventName": "PM_L3_CI_USAGE",
"BriefDescription": "rotating sample of 16 CI or CO actives",
"PublicDescription": ""
},
- {,
- "EventCode": "0x438088",
- "EventName": "PM_L3_CO",
- "BriefDescription": "l3 castout occurring ( does not include casthrough or log writes (cinj/dmaw)",
- "PublicDescription": ""
- },
{,
"EventCode": "0x83908b",
"EventName": "PM_L3_CO0_ALLOC",
@@ -2009,120 +1763,18 @@
"BriefDescription": "L3 CO to L3.1 OR of port 0 and 1 ( lossy)",
"PublicDescription": ""
},
- {,
- "EventCode": "0x238088",
- "EventName": "PM_L3_CO_LCO",
- "BriefDescription": "Total L3 castouts occurred on LCO",
- "PublicDescription": ""
- },
{,
"EventCode": "0x28084",
"EventName": "PM_L3_CO_MEM",
"BriefDescription": "L3 CO to memory OR of port 0 and 1 ( lossy)",
"PublicDescription": ""
},
- {,
- "EventCode": "0xb19082",
- "EventName": "PM_L3_GRP_GUESS_CORRECT",
- "BriefDescription": "Initial scope=group and data from same group (near) (pred successful)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xb3908a",
- "EventName": "PM_L3_GRP_GUESS_WRONG_HIGH",
- "BriefDescription": "Initial scope=group but data from local node. Predition too high",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xb39088",
- "EventName": "PM_L3_GRP_GUESS_WRONG_LOW",
- "BriefDescription": "Initial scope=group but data from outside group (far or rem). Prediction too Low",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x218080",
- "EventName": "PM_L3_HIT",
- "BriefDescription": "L3 Hits",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x138088",
- "EventName": "PM_L3_L2_CO_HIT",
- "BriefDescription": "L2 castout hits",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x13808a",
- "EventName": "PM_L3_L2_CO_MISS",
- "BriefDescription": "L2 castout miss",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x14808c",
- "EventName": "PM_L3_LAT_CI_HIT",
- "BriefDescription": "L3 Lateral Castins Hit",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x14808e",
- "EventName": "PM_L3_LAT_CI_MISS",
- "BriefDescription": "L3 Lateral Castins Miss",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x228084",
- "EventName": "PM_L3_LD_HIT",
- "BriefDescription": "L3 demand LD Hits",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x228086",
- "EventName": "PM_L3_LD_MISS",
- "BriefDescription": "L3 demand LD Miss",
- "PublicDescription": ""
- },
{,
"EventCode": "0x1e052",
"EventName": "PM_L3_LD_PREF",
"BriefDescription": "L3 Load Prefetches",
"PublicDescription": ""
},
- {,
- "EventCode": "0xb19080",
- "EventName": "PM_L3_LOC_GUESS_CORRECT",
- "BriefDescription": "initial scope=node/chip and data from local node (local) (pred successful)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xb29086",
- "EventName": "PM_L3_LOC_GUESS_WRONG",
- "BriefDescription": "Initial scope=node but data from out side local node (near or far or rem). Prediction too Low",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x218082",
- "EventName": "PM_L3_MISS",
- "BriefDescription": "L3 Misses",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x54808c",
- "EventName": "PM_L3_P0_CO_L31",
- "BriefDescription": "l3 CO to L3.1 (lco) port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x538088",
- "EventName": "PM_L3_P0_CO_MEM",
- "BriefDescription": "l3 CO to memory port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x929084",
- "EventName": "PM_L3_P0_CO_RTY",
- "BriefDescription": "L3 CO received retry port 0",
- "PublicDescription": ""
- },
{,
"EventCode": "0xa29084",
"EventName": "PM_L3_P0_GRP_PUMP",
@@ -2147,120 +1799,6 @@
"BriefDescription": "L3 LCO received retry port 0",
"PublicDescription": ""
},
- {,
- "EventCode": "0xa19080",
- "EventName": "PM_L3_P0_NODE_PUMP",
- "BriefDescription": "L3 pf sent with nodal scope port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x919080",
- "EventName": "PM_L3_P0_PF_RTY",
- "BriefDescription": "L3 PF received retry port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x939088",
- "EventName": "PM_L3_P0_SN_HIT",
- "BriefDescription": "L3 snoop hit port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x118080",
- "EventName": "PM_L3_P0_SN_INV",
- "BriefDescription": "Port0 snooper detects someone doing a store to a line thats Sx",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x94908c",
- "EventName": "PM_L3_P0_SN_MISS",
- "BriefDescription": "L3 snoop miss port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xa39088",
- "EventName": "PM_L3_P0_SYS_PUMP",
- "BriefDescription": "L3 pf sent with sys scope port 0",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x54808e",
- "EventName": "PM_L3_P1_CO_L31",
- "BriefDescription": "l3 CO to L3.1 (lco) port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x53808a",
- "EventName": "PM_L3_P1_CO_MEM",
- "BriefDescription": "l3 CO to memory port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x929086",
- "EventName": "PM_L3_P1_CO_RTY",
- "BriefDescription": "L3 CO received retry port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xa29086",
- "EventName": "PM_L3_P1_GRP_PUMP",
- "BriefDescription": "L3 pf sent with grp scope port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x528086",
- "EventName": "PM_L3_P1_LCO_DATA",
- "BriefDescription": "lco sent with data port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x518082",
- "EventName": "PM_L3_P1_LCO_NO_DATA",
- "BriefDescription": "dataless l3 lco sent port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xa4908e",
- "EventName": "PM_L3_P1_LCO_RTY",
- "BriefDescription": "L3 LCO received retry port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xa19082",
- "EventName": "PM_L3_P1_NODE_PUMP",
- "BriefDescription": "L3 pf sent with nodal scope port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x919082",
- "EventName": "PM_L3_P1_PF_RTY",
- "BriefDescription": "L3 PF received retry port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x93908a",
- "EventName": "PM_L3_P1_SN_HIT",
- "BriefDescription": "L3 snoop hit port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x118082",
- "EventName": "PM_L3_P1_SN_INV",
- "BriefDescription": "Port1 snooper detects someone doing a store to a line thats Sx",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x94908e",
- "EventName": "PM_L3_P1_SN_MISS",
- "BriefDescription": "L3 snoop miss port 1",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xa3908a",
- "EventName": "PM_L3_P1_SYS_PUMP",
- "BriefDescription": "L3 pf sent with sys scope port 1",
- "PublicDescription": ""
- },
{,
"EventCode": "0x84908d",
"EventName": "PM_L3_PF0_ALLOC",
@@ -2273,12 +1811,6 @@
"BriefDescription": "lifetime, sample of PF machine 0 valid",
"PublicDescription": ""
},
- {,
- "EventCode": "0x428084",
- "EventName": "PM_L3_PF_HIT_L3",
- "BriefDescription": "l3 pf hit in l3",
- "PublicDescription": ""
- },
{,
"EventCode": "0x18080",
"EventName": "PM_L3_PF_MISS_L3",
@@ -2369,42 +1901,12 @@
"BriefDescription": "Data stream touchto L3",
"PublicDescription": ""
},
- {,
- "EventCode": "0xb29084",
- "EventName": "PM_L3_SYS_GUESS_CORRECT",
- "BriefDescription": "Initial scope=system and data from outside group (far or rem)(pred successful)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0xb4908c",
- "EventName": "PM_L3_SYS_GUESS_WRONG",
- "BriefDescription": "Initial scope=system but data from local or near. Predction too high",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x24808e",
- "EventName": "PM_L3_TRANS_PF",
- "BriefDescription": "L3 Transient prefetch",
- "PublicDescription": ""
- },
{,
"EventCode": "0x18081",
"EventName": "PM_L3_WI0_ALLOC",
"BriefDescription": "lifetime, sample of Write Inject machine 0 valid",
"PublicDescription": "0.0"
},
- {,
- "EventCode": "0x418080",
- "EventName": "PM_L3_WI0_BUSY",
- "BriefDescription": "lifetime, sample of Write Inject machine 0 valid",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x418082",
- "EventName": "PM_L3_WI_USAGE",
- "BriefDescription": "rotating sample of 8 WI actives",
- "PublicDescription": ""
- },
{,
"EventCode": "0xc080",
"EventName": "PM_LD_REF_L1_LSU0",
@@ -3311,12 +2813,6 @@
"BriefDescription": "Dispatch time non favored tbegin",
"PublicDescription": ""
},
- {,
- "EventCode": "0x328084",
- "EventName": "PM_NON_TM_RST_SC",
- "BriefDescription": "non tm snp rst tm sc",
- "PublicDescription": ""
- },
{,
"EventCode": "0x2001a",
"EventName": "PM_NTCG_ALL_FIN",
@@ -3419,24 +2915,6 @@
"BriefDescription": "Continuous 16 cycle(2to1) window where this signals rotates thru sampling each L2 RC machine busy. PMU uses this wave to then do 16 cyc count to sample total number of machs running",
"PublicDescription": ""
},
- {,
- "EventCode": "0x34808e",
- "EventName": "PM_RD_CLEARING_SC",
- "BriefDescription": "rd clearing sc",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x34808c",
- "EventName": "PM_RD_FORMING_SC",
- "BriefDescription": "rd forming sc",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x428086",
- "EventName": "PM_RD_HIT_PF",
- "BriefDescription": "rd machine hit l3 pf machine",
- "PublicDescription": ""
- },
{,
"EventCode": "0x20004",
"EventName": "PM_REAL_SRQ_FULL",
@@ -3503,18 +2981,6 @@
"BriefDescription": "TLBIE snoop",
"PublicDescription": "TLBIE snoopSnoop TLBIE"
},
- {,
- "EventCode": "0x338088",
- "EventName": "PM_SNP_TM_HIT_M",
- "BriefDescription": "snp tm st hit m mu",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x33808a",
- "EventName": "PM_SNP_TM_HIT_T",
- "BriefDescription": "snp tm_st_hit t tn te",
- "PublicDescription": ""
- },
{,
"EventCode": "0x4608c",
"EventName": "PM_SN_USAGE",
@@ -3533,12 +2999,6 @@
"BriefDescription": "STCX executed reported at sent to nest",
"PublicDescription": "STCX executed reported at sent to nest42"
},
- {,
- "EventCode": "0x717080",
- "EventName": "PM_ST_CAUSED_FAIL",
- "BriefDescription": "Non TM St caused any thread to fail",
- "PublicDescription": ""
- },
{,
"EventCode": "0x3090",
"EventName": "PM_SWAP_CANCEL",
@@ -3623,18 +3083,6 @@
"BriefDescription": "Tm any tbegin",
"PublicDescription": ""
},
- {,
- "EventCode": "0x318082",
- "EventName": "PM_TM_CAM_OVERFLOW",
- "BriefDescription": "l3 tm cam overflow during L2 co of SC",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x74708c",
- "EventName": "PM_TM_CAP_OVERFLOW",
- "BriefDescription": "TM Footprint Capactiy Overflow",
- "PublicDescription": ""
- },
{,
"EventCode": "0x20ba",
"EventName": "PM_TM_END_ALL",
@@ -3689,48 +3137,6 @@
"BriefDescription": "Transactional conflict from LSU, whatever gets reported to texas",
"PublicDescription": "Transactional conflict from LSU, whatever gets reported to texas 42"
},
- {,
- "EventCode": "0x727086",
- "EventName": "PM_TM_FAV_CAUSED_FAIL",
- "BriefDescription": "TM Load (fav) caused another thread to fail",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x717082",
- "EventName": "PM_TM_LD_CAUSED_FAIL",
- "BriefDescription": "Non TM Ld caused any thread to fail",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x727084",
- "EventName": "PM_TM_LD_CONF",
- "BriefDescription": "TM Load (fav or non-fav) ran into conflict (failed)",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x328086",
- "EventName": "PM_TM_RST_SC",
- "BriefDescription": "tm snp rst tm sc",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x318080",
- "EventName": "PM_TM_SC_CO",
- "BriefDescription": "l3 castout tm Sc line",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x73708a",
- "EventName": "PM_TM_ST_CAUSED_FAIL",
- "BriefDescription": "TM Store (fav or non-fav) caused another thread to fail",
- "PublicDescription": ""
- },
- {,
- "EventCode": "0x737088",
- "EventName": "PM_TM_ST_CONF",
- "BriefDescription": "TM Store (fav or non-fav) ran into conflict (failed)",
- "PublicDescription": ""
- },
{,
"EventCode": "0x20bc",
"EventName": "PM_TM_TBEGIN",
--
2.20.1
next prev parent reply other threads:[~2019-03-21 18:51 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 18:50 [GIT PULL 00/44] perf/core fixes and improvements Arnaldo Carvalho de Melo
2019-03-21 18:50 ` [PATCH 01/44] perf list: Filter metrics too Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 02/44] perf record: Allow to limit number of reported perf.data files Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 03/44] perf record: Clarify help for --switch-output Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 04/44] perf report: Show all sort keys in help output Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 05/44] perf report: Indicate JITed code better in report Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 06/44] perf script: Support relative time Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 07/44] perf stat: Fix --no-scale Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 08/44] perf stat: Improve scaling Arnaldo Carvalho de Melo
2019-03-21 18:51 ` Arnaldo Carvalho de Melo [this message]
2019-03-21 18:51 ` [PATCH 10/44] perf tools: Add doc about how to build perf with Asan and UBSan Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 11/44] perf list: Don't forget to drop the reference to the allocated thread_map Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 12/44] perf tools: Fix errors under optimization level '-Og' Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 13/44] perf config: Fix an error in the config template documentation Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 14/44] perf config: Fix a memory leak in collect_config() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 15/44] perf build-id: Fix memory leak in print_sdt_events() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 16/44] perf top: Delete the evlist before perf_session, fixing heap-use-after-free issue Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 17/44] perf top: Fix error handling in cmd_top() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 18/44] perf hist: Add missing map__put() in error case Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 19/44] perf map: Remove map from 'names' tree in __maps__remove() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 20/44] perf maps: Purge all maps from the 'names' tree Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 21/44] perf top: Fix global-buffer-overflow issue Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 22/44] perf evsel: Free evsel->counts in perf_evsel__exit() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 23/44] perf tests: Fix a memory leak of cpu_map object in the openat_syscall_event_on_all_cpus test Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 24/44] perf tests: Fix memory leak by expr__find_other() in test__expr() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 25/44] perf tests: Fix a memory leak in test__perf_evsel__tp_sched_test() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 26/44] perf record: Replace option --bpf-event with --no-bpf-event Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 27/44] tools lib bpf: Introduce bpf_program__get_prog_info_linear() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 28/44] bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 29/44] perf bpf: Synthesize bpf events with bpf_program__get_prog_info_linear() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 30/44] perf bpf: Make synthesize_bpf_events() receive perf_session pointer instead of perf_tool Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 31/44] perf bpf: Save bpf_prog_info in a rbtree in perf_env Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 32/44] perf bpf: Save bpf_prog_info information as headers to perf.data Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 33/44] perf bpf: Save BTF in a rbtree in perf_env Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 34/44] perf bpf: Save BTF information as headers to perf.data Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 35/44] perf top: Add option --no-bpf-event Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 36/44] perf feature detection: Add -lopcodes to feature-libbfd Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 37/44] perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 38/44] perf bpf: Process PERF_BPF_EVENT_PROG_LOAD for annotation Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 39/44] perf build: Check what binutils's 'disassembler()' signature to use Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 40/44] perf annotate: Enable annotation of BPF programs Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 41/44] perf evlist: Introduce side band thread Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 42/44] perf tools: Save bpf_prog_info and BTF of new BPF programs Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 43/44] perf bpf: Extract logic to create program names from perf_event__synthesize_one_bpf_prog() Arnaldo Carvalho de Melo
2019-03-21 18:51 ` [PATCH 44/44] perf bpf: Show more BPF program info in print_bpf_prog_info() Arnaldo Carvalho de Melo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190321185142.11441-10-acme@kernel.org \
--to=acme@kernel.org \
--cc=acme@redhat.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=jolsa@kernel.org \
--cc=jolsa@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=maddy@linux.vnet.ibm.com \
--cc=mamatha4@linux.vnet.ibm.com \
--cc=mingo@kernel.org \
--cc=mpe@ellerman.id.au \
--cc=namhyung@kernel.org \
--cc=peterz@infradead.org \
--cc=ravi.bangoria@linux.ibm.com \
--cc=sukadev@linux.vnet.ibm.com \
--cc=williams@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).