[PATCH v3 00/10] riscv: Allow userspace to directly access perf counters

[PATCH v3 00/10] riscv: Allow userspace to directly access perf counters

[Alexandre Ghiti]

riscv used to allow direct access to cycle/time/instret counters,
bypassing the perf framework, this patchset intends to allow the user to
mmap any counter when accessed through perf. But we can't break the
existing behaviour so we introduce a sysctl perf_user_access like arm64
does, which defaults to the legacy mode described above.

This version needs openSBI v1.3 *and* a fix that went upstream lately
(https://lore.kernel.org/lkml/20230616114831.3186980-1-maz@kernel.org/T/).

**Important**: In this version, the default mode is now user access, not
the legacy so some applications will break.

base-commit-tag: v6.4-rc6

Changes in v3:
v3:
- patch 1 now contains the ref to the faulty commit (no Fixes tag as it is only a comment), as Andrew suggested
- Removed RISCV_PMU_LEGACY_TIME from patch 3, as Andrew suggested
- Rename RISCV_PMU_PDEV_NAME to "riscv-pmu-sbi", patch4 is just cosmetic now, as Andrew suggested
- Removed a few useless (and wrong) comments, as Andrew suggested
- Simplify arch_perf_update_userpage code, as Andrew suggested
- Documentation now mentions that time CSR is *always* accessible, whatever the mode, as suggested by Andrew
- Removed CYCLEH reference and add TODO for rv32 support, as suggested by Atish
- Do not rename the pmu instance as Atish suggested
- Set pmc_width only if rdpmc is enabled and CONFIG_RISCV_PMU is set and the event is a hw event
- Move arch_perf_update_userpage https://lore.kernel.org/lkml/20230616114831.3186980-1-maz@kernel.org/T/
- **Switch to user mode access by default**

Changes in v2:
- Split into smaller patches, way better!
- Add RB from Conor
- Simplify the way we checked riscv architecture
- Fix race mmap and other thread running on other cpus
- Use hwc when available
- Set all userspace access flags in event_init, too cumbersome to handle sysctl changes
- Fix arch_perf_update_userpage for pmu other than riscv-pmu by renaming pmu driver
- Fixed kernel test robot build error
- Fixed documentation (Andrew and Bagas)
- perf testsuite passes mmap tests in all 3 modes

Alexandre Ghiti (10):
  perf: Fix wrong comment about default event_idx
  include: riscv: Fix wrong include guard in riscv_pmu.h
  riscv: Make legacy counter enum match the HW numbering
  drivers: perf: Rename riscv pmu sbi driver
  riscv: Prepare for user-space perf event mmap support
  drivers: perf: Implement perf event mmap support in the legacy backend
  drivers: perf: Implement perf event mmap support in the SBI backend
  Documentation: admin-guide: Add riscv sysctl_perf_user_access
  tools: lib: perf: Implement riscv mmap support
  perf: tests: Adapt mmap-basic.c for riscv

 Documentation/admin-guide/sysctl/kernel.rst |  26 ++-
 drivers/perf/riscv_pmu.c                    | 113 +++++++++++
 drivers/perf/riscv_pmu_legacy.c             |  28 ++-
 drivers/perf/riscv_pmu_sbi.c                | 196 +++++++++++++++++++-
 include/linux/perf/riscv_pmu.h              |  12 +-
 include/linux/perf_event.h                  |   3 +-
 tools/lib/perf/mmap.c                       |  65 +++++++
 tools/perf/tests/mmap-basic.c               |   4 +-
 8 files changed, 427 insertions(+), 20 deletions(-)

-- 
2.39.2

[PATCH v3 01/10] perf: Fix wrong comment about default event_idx

[Alexandre Ghiti]

Since commit c719f56092ad ("perf: Fix and clean up initialization of
pmu::event_idx"), event_idx default implementation has returned 0, not
idx + 1, so fix the comment that can be misleading.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
---
 include/linux/perf_event.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index d5628a7b5eaa..56fe43b20966 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -442,7 +442,8 @@ struct pmu {
 
 	/*
 	 * Will return the value for perf_event_mmap_page::index for this event,
-	 * if no implementation is provided it will default to: event->hw.idx + 1.
+	 * if no implementation is provided it will default to 0 (see
+	 * perf_event_idx_default).
 	 */
 	int (*event_idx)		(struct perf_event *event); /*optional */
 
-- 
2.39.2

[PATCH v3 02/10] include: riscv: Fix wrong include guard in riscv_pmu.h

[Alexandre Ghiti]

The current include guard prevents the inclusion of asm/perf_event.h
which uses the same include guard: fix the one in riscv_pmu.h so that it
matches the file name.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
---
 include/linux/perf/riscv_pmu.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 43fc892aa7d9..9f70d94942e0 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -6,8 +6,8 @@
  *
  */
 
-#ifndef _ASM_RISCV_PERF_EVENT_H
-#define _ASM_RISCV_PERF_EVENT_H
+#ifndef _RISCV_PMU_H
+#define _RISCV_PMU_H
 
 #include <linux/perf_event.h>
 #include <linux/ptrace.h>
@@ -81,4 +81,4 @@ int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr);
 
 #endif /* CONFIG_RISCV_PMU */
 
-#endif /* _ASM_RISCV_PERF_EVENT_H */
+#endif /* _RISCV_PMU_H */
-- 
2.39.2

[PATCH v3 03/10] riscv: Make legacy counter enum match the HW numbering

[Alexandre Ghiti]

RISCV_PMU_LEGACY_INSTRET used to be set to 1 whereas the offset of this
hardware counter from CSR_CYCLE is actually 2: make this offset match the
real hw offset so that we can directly expose those values to userspace.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
---
 drivers/perf/riscv_pmu_legacy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
index ca9e20bfc7ac..6a000abc28bb 100644
--- a/drivers/perf/riscv_pmu_legacy.c
+++ b/drivers/perf/riscv_pmu_legacy.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 
 #define RISCV_PMU_LEGACY_CYCLE		0
-#define RISCV_PMU_LEGACY_INSTRET	1
+#define RISCV_PMU_LEGACY_INSTRET	2
 
 static bool pmu_init_done;
 
-- 
2.39.2

Re: [PATCH v3 03/10] riscv: Make legacy counter enum match the HW numbering

[Andrew Jones]

On Fri, Jun 30, 2023 at 10:30:06AM +0200, Alexandre Ghiti wrote:
> RISCV_PMU_LEGACY_INSTRET used to be set to 1 whereas the offset of this
> hardware counter from CSR_CYCLE is actually 2: make this offset match the
> real hw offset so that we can directly expose those values to userspace.
> 
> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> ---
>  drivers/perf/riscv_pmu_legacy.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
> index ca9e20bfc7ac..6a000abc28bb 100644
> --- a/drivers/perf/riscv_pmu_legacy.c
> +++ b/drivers/perf/riscv_pmu_legacy.c
> @@ -13,7 +13,7 @@
>  #include <linux/platform_device.h>
>  
>  #define RISCV_PMU_LEGACY_CYCLE		0
> -#define RISCV_PMU_LEGACY_INSTRET	1
> +#define RISCV_PMU_LEGACY_INSTRET	2
>  
>  static bool pmu_init_done;
>  
> -- 
> 2.39.2
>

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

[PATCH v3 04/10] drivers: perf: Rename riscv pmu sbi driver

[Alexandre Ghiti]

That's just cosmetic, no functional changes.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 drivers/perf/riscv_pmu_sbi.c   | 4 ++--
 include/linux/perf/riscv_pmu.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 4f3ac296b3e2..83c3f1c4d2f1 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -914,7 +914,7 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 static struct platform_driver pmu_sbi_driver = {
 	.probe		= pmu_sbi_device_probe,
 	.driver		= {
-		.name	= RISCV_PMU_PDEV_NAME,
+		.name	= RISCV_PMU_SBI_PDEV_NAME,
 	},
 };
 
@@ -941,7 +941,7 @@ static int __init pmu_sbi_devinit(void)
 	if (ret)
 		return ret;
 
-	pdev = platform_device_register_simple(RISCV_PMU_PDEV_NAME, -1, NULL, 0);
+	pdev = platform_device_register_simple(RISCV_PMU_SBI_PDEV_NAME, -1, NULL, 0);
 	if (IS_ERR(pdev)) {
 		platform_driver_unregister(&pmu_sbi_driver);
 		return PTR_ERR(pdev);
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 9f70d94942e0..5deeea0be7cb 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -21,7 +21,7 @@
 
 #define RISCV_MAX_COUNTERS	64
 #define RISCV_OP_UNSUPP		(-EOPNOTSUPP)
-#define RISCV_PMU_PDEV_NAME	"riscv-pmu"
+#define RISCV_PMU_SBI_PDEV_NAME	"riscv-pmu-sbi"
 #define RISCV_PMU_LEGACY_PDEV_NAME	"riscv-pmu-legacy"
 
 #define RISCV_PMU_STOP_FLAG_RESET 1
-- 
2.39.2

[PATCH v3 05/10] riscv: Prepare for user-space perf event mmap support

[Alexandre Ghiti]

Provide all the necessary bits in the generic riscv pmu driver to be
able to mmap perf events in userspace: the heavy lifting lies in the
driver backend, namely the legacy and sbi implementations.

Note that arch_perf_update_userpage is almost a copy of arm64 code.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 drivers/perf/riscv_pmu.c       | 106 +++++++++++++++++++++++++++++++++
 include/linux/perf/riscv_pmu.h |   4 ++
 2 files changed, 110 insertions(+)

diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index ebca5eab9c9b..e1b0992f34df 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -14,9 +14,74 @@
 #include <linux/perf/riscv_pmu.h>
 #include <linux/printk.h>
 #include <linux/smp.h>
+#include <linux/sched_clock.h>
 
 #include <asm/sbi.h>
 
+static bool riscv_perf_user_access(struct perf_event *event)
+{
+	return ((event->attr.type == PERF_TYPE_HARDWARE) ||
+		(event->attr.type == PERF_TYPE_HW_CACHE) ||
+		(event->attr.type == PERF_TYPE_RAW)) &&
+		!!(event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT);
+}
+
+void arch_perf_update_userpage(struct perf_event *event,
+			       struct perf_event_mmap_page *userpg, u64 now)
+{
+	struct clock_read_data *rd;
+	unsigned int seq;
+	u64 ns;
+
+	userpg->cap_user_time = 0;
+	userpg->cap_user_time_zero = 0;
+	userpg->cap_user_time_short = 0;
+	userpg->cap_user_rdpmc = riscv_perf_user_access(event);
+
+	if (userpg->cap_user_rdpmc)
+		userpg->pmc_width = 64;
+
+	do {
+		rd = sched_clock_read_begin(&seq);
+
+		userpg->time_mult = rd->mult;
+		userpg->time_shift = rd->shift;
+		userpg->time_zero = rd->epoch_ns;
+		userpg->time_cycles = rd->epoch_cyc;
+		userpg->time_mask = rd->sched_clock_mask;
+
+		/*
+		 * Subtract the cycle base, such that software that
+		 * doesn't know about cap_user_time_short still 'works'
+		 * assuming no wraps.
+		 */
+		ns = mul_u64_u32_shr(rd->epoch_cyc, rd->mult, rd->shift);
+		userpg->time_zero -= ns;
+
+	} while (sched_clock_read_retry(seq));
+
+	userpg->time_offset = userpg->time_zero - now;
+
+	/*
+	 * time_shift is not expected to be greater than 31 due to
+	 * the original published conversion algorithm shifting a
+	 * 32-bit value (now specifies a 64-bit value) - refer
+	 * perf_event_mmap_page documentation in perf_event.h.
+	 */
+	if (userpg->time_shift == 32) {
+		userpg->time_shift = 31;
+		userpg->time_mult >>= 1;
+	}
+
+	/*
+	 * Internal timekeeping for enabled/running/stopped times
+	 * is always computed with the sched_clock.
+	 */
+	userpg->cap_user_time = 1;
+	userpg->cap_user_time_zero = 1;
+	userpg->cap_user_time_short = 1;
+}
+
 static unsigned long csr_read_num(int csr_num)
 {
 #define switchcase_csr_read(__csr_num, __val)		{\
@@ -171,6 +236,8 @@ int riscv_pmu_event_set_period(struct perf_event *event)
 
 	local64_set(&hwc->prev_count, (u64)-left);
 
+	perf_event_update_userpage(event);
+
 	return overflow;
 }
 
@@ -267,6 +334,9 @@ static int riscv_pmu_event_init(struct perf_event *event)
 	hwc->idx = -1;
 	hwc->event_base = mapped_event;
 
+	if (rvpmu->event_init)
+		rvpmu->event_init(event);
+
 	if (!is_sampling_event(event)) {
 		/*
 		 * For non-sampling runs, limit the sample_period to half
@@ -283,6 +353,39 @@ static int riscv_pmu_event_init(struct perf_event *event)
 	return 0;
 }
 
+static int riscv_pmu_event_idx(struct perf_event *event)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+	if (!(event->hw.flags & PERF_EVENT_FLAG_USER_READ_CNT))
+		return 0;
+
+	if (rvpmu->csr_index)
+		return rvpmu->csr_index(event) + 1;
+
+	return 0;
+}
+
+static void riscv_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+	if (rvpmu->event_mapped) {
+		rvpmu->event_mapped(event, mm);
+		perf_event_update_userpage(event);
+	}
+}
+
+static void riscv_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mm)
+{
+	struct riscv_pmu *rvpmu = to_riscv_pmu(event->pmu);
+
+	if (rvpmu->event_unmapped) {
+		rvpmu->event_unmapped(event, mm);
+		perf_event_update_userpage(event);
+	}
+}
+
 struct riscv_pmu *riscv_pmu_alloc(void)
 {
 	struct riscv_pmu *pmu;
@@ -307,6 +410,9 @@ struct riscv_pmu *riscv_pmu_alloc(void)
 	}
 	pmu->pmu = (struct pmu) {
 		.event_init	= riscv_pmu_event_init,
+		.event_mapped	= riscv_pmu_event_mapped,
+		.event_unmapped	= riscv_pmu_event_unmapped,
+		.event_idx	= riscv_pmu_event_idx,
 		.add		= riscv_pmu_add,
 		.del		= riscv_pmu_del,
 		.start		= riscv_pmu_start,
diff --git a/include/linux/perf/riscv_pmu.h b/include/linux/perf/riscv_pmu.h
index 5deeea0be7cb..43282e22ebe1 100644
--- a/include/linux/perf/riscv_pmu.h
+++ b/include/linux/perf/riscv_pmu.h
@@ -55,6 +55,10 @@ struct riscv_pmu {
 	void		(*ctr_start)(struct perf_event *event, u64 init_val);
 	void		(*ctr_stop)(struct perf_event *event, unsigned long flag);
 	int		(*event_map)(struct perf_event *event, u64 *config);
+	void		(*event_init)(struct perf_event *event);
+	void		(*event_mapped)(struct perf_event *event, struct mm_struct *mm);
+	void		(*event_unmapped)(struct perf_event *event, struct mm_struct *mm);
+	uint8_t		(*csr_index)(struct perf_event *event);
 
 	struct cpu_hw_events	__percpu *hw_events;
 	struct hlist_node	node;
-- 
2.39.2

[PATCH v3 06/10] drivers: perf: Implement perf event mmap support in the legacy backend

[Alexandre Ghiti]

Implement the needed callbacks in the legacy driver so that we can
directly access the counters through perf in userspace.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 drivers/perf/riscv_pmu_legacy.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/perf/riscv_pmu_legacy.c b/drivers/perf/riscv_pmu_legacy.c
index 6a000abc28bb..79fdd667922e 100644
--- a/drivers/perf/riscv_pmu_legacy.c
+++ b/drivers/perf/riscv_pmu_legacy.c
@@ -71,6 +71,29 @@ static void pmu_legacy_ctr_start(struct perf_event *event, u64 ival)
 	local64_set(&hwc->prev_count, initial_val);
 }
 
+static uint8_t pmu_legacy_csr_index(struct perf_event *event)
+{
+	return event->hw.idx;
+}
+
+static void pmu_legacy_event_mapped(struct perf_event *event, struct mm_struct *mm)
+{
+	if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
+	    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS)
+		return;
+
+	event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT;
+}
+
+static void pmu_legacy_event_unmapped(struct perf_event *event, struct mm_struct *mm)
+{
+	if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
+	    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS)
+		return;
+
+	event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT;
+}
+
 /*
  * This is just a simple implementation to allow legacy implementations
  * compatible with new RISC-V PMU driver framework.
@@ -91,6 +114,9 @@ static void pmu_legacy_init(struct riscv_pmu *pmu)
 	pmu->ctr_get_width = NULL;
 	pmu->ctr_clear_idx = NULL;
 	pmu->ctr_read = pmu_legacy_read_ctr;
+	pmu->event_mapped = pmu_legacy_event_mapped;
+	pmu->event_unmapped = pmu_legacy_event_unmapped;
+	pmu->csr_index = pmu_legacy_csr_index;
 
 	perf_pmu_register(&pmu->pmu, "cpu", PERF_TYPE_RAW);
 }
-- 
2.39.2

[PATCH v3 07/10] drivers: perf: Implement perf event mmap support in the SBI backend

[Alexandre Ghiti]

We used to unconditionnally expose the cycle and instret csrs to
userspace, which gives rise to security concerns.

So now we only allow access to hw counters from userspace through the perf
framework which will handle context switches, per-task events...etc. But
as we cannot break userspace, we give the user the choice to go back to
the previous behaviour by setting the sysctl perf_user_access.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
---
 drivers/perf/riscv_pmu.c     |   9 +-
 drivers/perf/riscv_pmu_sbi.c | 192 +++++++++++++++++++++++++++++++++--
 2 files changed, 194 insertions(+), 7 deletions(-)

diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
index e1b0992f34df..80c052e93f9e 100644
--- a/drivers/perf/riscv_pmu.c
+++ b/drivers/perf/riscv_pmu.c
@@ -38,8 +38,15 @@ void arch_perf_update_userpage(struct perf_event *event,
 	userpg->cap_user_time_short = 0;
 	userpg->cap_user_rdpmc = riscv_perf_user_access(event);
 
+#ifdef CONFIG_RISCV_PMU
+	/*
+	 * The counters are 64-bit but the priv spec doesn't mandate all the
+	 * bits to be implemented: that's why, counter width can vary based on
+	 * the cpu vendor.
+	 */
 	if (userpg->cap_user_rdpmc)
-		userpg->pmc_width = 64;
+		userpg->pmc_width = to_riscv_pmu(event->pmu)->ctr_get_width(event->hw.idx) + 1;
+#endif
 
 	do {
 		rd = sched_clock_read_begin(&seq);
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 83c3f1c4d2f1..acabb6c273c1 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -24,6 +24,14 @@
 #include <asm/sbi.h>
 #include <asm/hwcap.h>
 
+#define SYSCTL_NO_USER_ACCESS	0
+#define SYSCTL_USER_ACCESS	1
+#define SYSCTL_LEGACY		2
+
+#define PERF_EVENT_FLAG_NO_USER_ACCESS	BIT(SYSCTL_NO_USER_ACCESS)
+#define PERF_EVENT_FLAG_USER_ACCESS	BIT(SYSCTL_USER_ACCESS)
+#define PERF_EVENT_FLAG_LEGACY		BIT(SYSCTL_LEGACY)
+
 PMU_FORMAT_ATTR(event, "config:0-47");
 PMU_FORMAT_ATTR(firmware, "config:63");
 
@@ -43,6 +51,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
 	NULL,
 };
 
+/* Allow user mode access by default */
+static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
+
 /*
  * RISC-V doesn't have heterogeneous harts yet. This need to be part of
  * per_cpu in case of harts with different pmu counters
@@ -301,6 +312,11 @@ int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr)
 }
 EXPORT_SYMBOL_GPL(riscv_pmu_get_hpm_info);
 
+static uint8_t pmu_sbi_csr_index(struct perf_event *event)
+{
+	return pmu_ctr_list[event->hw.idx].csr - CSR_CYCLE;
+}
+
 static unsigned long pmu_sbi_get_filter_flags(struct perf_event *event)
 {
 	unsigned long cflags = 0;
@@ -329,18 +345,34 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
 	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
 	struct sbiret ret;
 	int idx;
-	uint64_t cbase = 0;
+	uint64_t cbase = 0, cmask = rvpmu->cmask;
 	unsigned long cflags = 0;
 
 	cflags = pmu_sbi_get_filter_flags(event);
+
+	/*
+	 * In legacy mode, we have to force the fixed counters for those events
+	 * but not in the user access mode as we want to use the other counters
+	 * that support sampling/filtering.
+	 */
+	if (hwc->flags & PERF_EVENT_FLAG_LEGACY) {
+		if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
+			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
+			cmask = 1;
+		} else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) {
+			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
+			cmask = 1UL << (CSR_INSTRET - CSR_CYCLE);
+		}
+	}
+
 	/* retrieve the available counter index */
 #if defined(CONFIG_32BIT)
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
-			rvpmu->cmask, cflags, hwc->event_base, hwc->config,
+			cmask, cflags, hwc->event_base, hwc->config,
 			hwc->config >> 32);
 #else
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
-			rvpmu->cmask, cflags, hwc->event_base, hwc->config, 0);
+			cmask, cflags, hwc->event_base, hwc->config, 0);
 #endif
 	if (ret.error) {
 		pr_debug("Not able to find a counter for event %lx config %llx\n",
@@ -474,6 +506,14 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
 	return val;
 }
 
+static void pmu_sbi_set_scounteren(void *arg)
+{
+	struct perf_event *event = (struct perf_event *)arg;
+
+	csr_write(CSR_SCOUNTEREN,
+		  csr_read(CSR_SCOUNTEREN) | (1 << pmu_sbi_csr_index(event)));
+}
+
 static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
 {
 	struct sbiret ret;
@@ -490,6 +530,18 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
 	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
 		pr_err("Starting counter idx %d failed with error %d\n",
 			hwc->idx, sbi_err_map_linux_errno(ret.error));
+
+	if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
+	    hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)
+		pmu_sbi_set_scounteren((void *)event);
+}
+
+static void pmu_sbi_reset_scounteren(void *arg)
+{
+	struct perf_event *event = (struct perf_event *)arg;
+
+	csr_write(CSR_SCOUNTEREN,
+		  csr_read(CSR_SCOUNTEREN) & ~(1 << pmu_sbi_csr_index(event)));
 }
 
 static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
@@ -497,6 +549,10 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
 	struct sbiret ret;
 	struct hw_perf_event *hwc = &event->hw;
 
+	if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
+	    hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)
+		pmu_sbi_reset_scounteren((void *)event);
+
 	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
 	if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
 		flag != SBI_PMU_STOP_FLAG_RESET)
@@ -704,10 +760,13 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 	struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
 
 	/*
-	 * Enable the access for CYCLE, TIME, and INSTRET CSRs from userspace,
-	 * as is necessary to maintain uABI compatibility.
+	 * We keep enabling userspace access to CYCLE, TIME and INSRET via the
+	 * legacy option but that will be removed in the future.
 	 */
-	csr_write(CSR_SCOUNTEREN, 0x7);
+	if (sysctl_perf_user_access == SYSCTL_LEGACY)
+		csr_write(CSR_SCOUNTEREN, 0x7);
+	else
+		csr_write(CSR_SCOUNTEREN, 0x2);
 
 	/* Stop all the counters so that they can be enabled from perf */
 	pmu_sbi_stop_all(pmu);
@@ -851,6 +910,121 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu)
 	cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
 }
 
+static void pmu_sbi_event_init(struct perf_event *event)
+{
+	/*
+	 * The permissions are set at event_init so that we do not depend
+	 * on the sysctl value that can change.
+	 */
+	if (sysctl_perf_user_access == SYSCTL_NO_USER_ACCESS)
+		event->hw.flags |= PERF_EVENT_FLAG_NO_USER_ACCESS;
+	else if (sysctl_perf_user_access == SYSCTL_USER_ACCESS)
+		event->hw.flags |= PERF_EVENT_FLAG_USER_ACCESS;
+	else
+		event->hw.flags |= PERF_EVENT_FLAG_LEGACY;
+}
+
+static void pmu_sbi_event_mapped(struct perf_event *event, struct mm_struct *mm)
+{
+	if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
+		return;
+
+	if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
+		if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
+		    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
+			return;
+		}
+	}
+
+	/*
+	 * The user mmapped the event to directly access it: this is where
+	 * we determine based on sysctl_perf_user_access if we grant userspace
+	 * the direct access to this event. That means that within the same
+	 * task, some events may be directly accessible and some other may not,
+	 * if the user changes the value of sysctl_perf_user_accesss in the
+	 * meantime.
+	 */
+
+	event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT;
+
+	/*
+	 * We must enable userspace access *before* advertising in the user page
+	 * that it is possible to do so to avoid any race.
+	 * And we must notify all cpus here because threads that currently run
+	 * on other cpus will try to directly access the counter too without
+	 * calling pmu_sbi_ctr_start.
+	 */
+	if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
+		on_each_cpu_mask(mm_cpumask(mm),
+				 pmu_sbi_set_scounteren, (void *)event, 1);
+}
+
+static void pmu_sbi_event_unmapped(struct perf_event *event, struct mm_struct *mm)
+{
+	if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
+		return;
+
+	if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
+		if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
+		    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
+			return;
+		}
+	}
+
+	/*
+	 * Here we can directly remove user access since the user does not have
+	 * access to the user page anymore so we avoid the racy window where the
+	 * user could have read cap_user_rdpmc to true right before we disable
+	 * it.
+	 */
+	event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT;
+
+	if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
+		on_each_cpu_mask(mm_cpumask(mm),
+				 pmu_sbi_reset_scounteren, (void *)event, 1);
+}
+
+static void riscv_pmu_update_counter_access(void *info)
+{
+	if (sysctl_perf_user_access == SYSCTL_LEGACY)
+		csr_write(CSR_SCOUNTEREN, 0x7);
+	else
+		csr_write(CSR_SCOUNTEREN, 0x2);
+}
+
+static int riscv_pmu_proc_user_access_handler(struct ctl_table *table,
+					      int write, void *buffer,
+					      size_t *lenp, loff_t *ppos)
+{
+	int prev = sysctl_perf_user_access;
+	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+
+	/*
+	 * Test against the previous value since we clear SCOUNTEREN when
+	 * sysctl_perf_user_access is set to SYSCTL_USER_ACCESS, but we should
+	 * not do that if that was already the case.
+	 */
+	if (ret || !write || prev == sysctl_perf_user_access)
+		return ret;
+
+	on_each_cpu(riscv_pmu_update_counter_access, NULL, 1);
+
+	return 0;
+}
+
+static struct ctl_table sbi_pmu_sysctl_table[] = {
+	{
+		.procname       = "perf_user_access",
+		.data		= &sysctl_perf_user_access,
+		.maxlen		= sizeof(unsigned int),
+		.mode           = 0644,
+		.proc_handler	= riscv_pmu_proc_user_access_handler,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= SYSCTL_TWO,
+	},
+	{ }
+};
+
 static int pmu_sbi_device_probe(struct platform_device *pdev)
 {
 	struct riscv_pmu *pmu = NULL;
@@ -888,6 +1062,10 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	pmu->ctr_get_width = pmu_sbi_ctr_get_width;
 	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
 	pmu->ctr_read = pmu_sbi_ctr_read;
+	pmu->event_init = pmu_sbi_event_init;
+	pmu->event_mapped = pmu_sbi_event_mapped;
+	pmu->event_unmapped = pmu_sbi_event_unmapped;
+	pmu->csr_index = pmu_sbi_csr_index;
 
 	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
 	if (ret)
@@ -901,6 +1079,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_unregister;
 
+	register_sysctl("kernel", sbi_pmu_sysctl_table);
+
 	return 0;
 
 out_unregister:
-- 
2.39.2

Re: [PATCH v3 07/10] drivers: perf: Implement perf event mmap support in the SBI backend

[Andrew Jones]

On Fri, Jun 30, 2023 at 10:30:10AM +0200, Alexandre Ghiti wrote:
> We used to unconditionnally expose the cycle and instret csrs to
> userspace, which gives rise to security concerns.
> 
> So now we only allow access to hw counters from userspace through the perf
> framework which will handle context switches, per-task events...etc. But
> as we cannot break userspace, we give the user the choice to go back to
> the previous behaviour by setting the sysctl perf_user_access.
> 
> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> ---
>  drivers/perf/riscv_pmu.c     |   9 +-
>  drivers/perf/riscv_pmu_sbi.c | 192 +++++++++++++++++++++++++++++++++--
>  2 files changed, 194 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
> index e1b0992f34df..80c052e93f9e 100644
> --- a/drivers/perf/riscv_pmu.c
> +++ b/drivers/perf/riscv_pmu.c
> @@ -38,8 +38,15 @@ void arch_perf_update_userpage(struct perf_event *event,
>  	userpg->cap_user_time_short = 0;
>  	userpg->cap_user_rdpmc = riscv_perf_user_access(event);
>  
> +#ifdef CONFIG_RISCV_PMU
> +	/*
> +	 * The counters are 64-bit but the priv spec doesn't mandate all the
> +	 * bits to be implemented: that's why, counter width can vary based on
> +	 * the cpu vendor.
> +	 */
>  	if (userpg->cap_user_rdpmc)
> -		userpg->pmc_width = 64;
> +		userpg->pmc_width = to_riscv_pmu(event->pmu)->ctr_get_width(event->hw.idx) + 1;
> +#endif
>  
>  	do {
>  		rd = sched_clock_read_begin(&seq);
> diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> index 83c3f1c4d2f1..acabb6c273c1 100644
> --- a/drivers/perf/riscv_pmu_sbi.c
> +++ b/drivers/perf/riscv_pmu_sbi.c
> @@ -24,6 +24,14 @@
>  #include <asm/sbi.h>
>  #include <asm/hwcap.h>
>  
> +#define SYSCTL_NO_USER_ACCESS	0
> +#define SYSCTL_USER_ACCESS	1
> +#define SYSCTL_LEGACY		2
> +
> +#define PERF_EVENT_FLAG_NO_USER_ACCESS	BIT(SYSCTL_NO_USER_ACCESS)
> +#define PERF_EVENT_FLAG_USER_ACCESS	BIT(SYSCTL_USER_ACCESS)
> +#define PERF_EVENT_FLAG_LEGACY		BIT(SYSCTL_LEGACY)
> +
>  PMU_FORMAT_ATTR(event, "config:0-47");
>  PMU_FORMAT_ATTR(firmware, "config:63");
>  
> @@ -43,6 +51,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
>  	NULL,
>  };
>  
> +/* Allow user mode access by default */
> +static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
> +
>  /*
>   * RISC-V doesn't have heterogeneous harts yet. This need to be part of
>   * per_cpu in case of harts with different pmu counters
> @@ -301,6 +312,11 @@ int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr)
>  }
>  EXPORT_SYMBOL_GPL(riscv_pmu_get_hpm_info);
>  
> +static uint8_t pmu_sbi_csr_index(struct perf_event *event)
> +{
> +	return pmu_ctr_list[event->hw.idx].csr - CSR_CYCLE;
> +}
> +
>  static unsigned long pmu_sbi_get_filter_flags(struct perf_event *event)
>  {
>  	unsigned long cflags = 0;
> @@ -329,18 +345,34 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
>  	struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
>  	struct sbiret ret;
>  	int idx;
> -	uint64_t cbase = 0;
> +	uint64_t cbase = 0, cmask = rvpmu->cmask;
>  	unsigned long cflags = 0;
>  
>  	cflags = pmu_sbi_get_filter_flags(event);
> +
> +	/*
> +	 * In legacy mode, we have to force the fixed counters for those events
> +	 * but not in the user access mode as we want to use the other counters
> +	 * that support sampling/filtering.
> +	 */
> +	if (hwc->flags & PERF_EVENT_FLAG_LEGACY) {
> +		if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
> +			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> +			cmask = 1;
> +		} else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) {
> +			cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> +			cmask = 1UL << (CSR_INSTRET - CSR_CYCLE);
> +		}
> +	}
> +
>  	/* retrieve the available counter index */
>  #if defined(CONFIG_32BIT)
>  	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> -			rvpmu->cmask, cflags, hwc->event_base, hwc->config,
> +			cmask, cflags, hwc->event_base, hwc->config,
>  			hwc->config >> 32);
>  #else
>  	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> -			rvpmu->cmask, cflags, hwc->event_base, hwc->config, 0);
> +			cmask, cflags, hwc->event_base, hwc->config, 0);
>  #endif
>  	if (ret.error) {
>  		pr_debug("Not able to find a counter for event %lx config %llx\n",
> @@ -474,6 +506,14 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
>  	return val;
>  }
>  
> +static void pmu_sbi_set_scounteren(void *arg)
> +{
> +	struct perf_event *event = (struct perf_event *)arg;
> +
> +	csr_write(CSR_SCOUNTEREN,
> +		  csr_read(CSR_SCOUNTEREN) | (1 << pmu_sbi_csr_index(event)));
> +}
> +
>  static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
>  {
>  	struct sbiret ret;
> @@ -490,6 +530,18 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
>  	if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
>  		pr_err("Starting counter idx %d failed with error %d\n",
>  			hwc->idx, sbi_err_map_linux_errno(ret.error));
> +
> +	if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
> +	    hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)

nit: Add () around the &'s. I thought checkpatch complained about that?

> +		pmu_sbi_set_scounteren((void *)event);
> +}
> +
> +static void pmu_sbi_reset_scounteren(void *arg)
> +{
> +	struct perf_event *event = (struct perf_event *)arg;
> +
> +	csr_write(CSR_SCOUNTEREN,
> +		  csr_read(CSR_SCOUNTEREN) & ~(1 << pmu_sbi_csr_index(event)));
>  }

nit: I'd collocate pmu_sbi_set_scounteren() and
pmu_sbi_reset_scounteren() since they're counterparts.

>  
>  static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
> @@ -497,6 +549,10 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
>  	struct sbiret ret;
>  	struct hw_perf_event *hwc = &event->hw;
>  
> +	if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
> +	    hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)

nit: () around &'s

> +		pmu_sbi_reset_scounteren((void *)event);
> +
>  	ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
>  	if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
>  		flag != SBI_PMU_STOP_FLAG_RESET)
> @@ -704,10 +760,13 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
>  	struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
>  
>  	/*
> -	 * Enable the access for CYCLE, TIME, and INSTRET CSRs from userspace,
> -	 * as is necessary to maintain uABI compatibility.
> +	 * We keep enabling userspace access to CYCLE, TIME and INSRET via the
> +	 * legacy option but that will be removed in the future.
>  	 */
> -	csr_write(CSR_SCOUNTEREN, 0x7);
> +	if (sysctl_perf_user_access == SYSCTL_LEGACY)
> +		csr_write(CSR_SCOUNTEREN, 0x7);
> +	else
> +		csr_write(CSR_SCOUNTEREN, 0x2);
>  
>  	/* Stop all the counters so that they can be enabled from perf */
>  	pmu_sbi_stop_all(pmu);
> @@ -851,6 +910,121 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu)
>  	cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>  }
>  
> +static void pmu_sbi_event_init(struct perf_event *event)
> +{
> +	/*
> +	 * The permissions are set at event_init so that we do not depend
> +	 * on the sysctl value that can change.
> +	 */
> +	if (sysctl_perf_user_access == SYSCTL_NO_USER_ACCESS)
> +		event->hw.flags |= PERF_EVENT_FLAG_NO_USER_ACCESS;
> +	else if (sysctl_perf_user_access == SYSCTL_USER_ACCESS)
> +		event->hw.flags |= PERF_EVENT_FLAG_USER_ACCESS;
> +	else
> +		event->hw.flags |= PERF_EVENT_FLAG_LEGACY;
> +}
> +
> +static void pmu_sbi_event_mapped(struct perf_event *event, struct mm_struct *mm)
> +{
> +	if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
> +		return;
> +
> +	if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
> +		if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
> +		    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
> +			return;
> +		}
> +	}
> +
> +	/*
> +	 * The user mmapped the event to directly access it: this is where
> +	 * we determine based on sysctl_perf_user_access if we grant userspace
> +	 * the direct access to this event. That means that within the same
> +	 * task, some events may be directly accessible and some other may not,
> +	 * if the user changes the value of sysctl_perf_user_accesss in the
> +	 * meantime.
> +	 */
> +
> +	event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT;
> +
> +	/*
> +	 * We must enable userspace access *before* advertising in the user page
> +	 * that it is possible to do so to avoid any race.
> +	 * And we must notify all cpus here because threads that currently run
> +	 * on other cpus will try to directly access the counter too without
> +	 * calling pmu_sbi_ctr_start.
> +	 */
> +	if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
> +		on_each_cpu_mask(mm_cpumask(mm),
> +				 pmu_sbi_set_scounteren, (void *)event, 1);
> +}
> +
> +static void pmu_sbi_event_unmapped(struct perf_event *event, struct mm_struct *mm)
> +{
> +	if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
> +		return;
> +
> +	if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
> +		if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
> +		    event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
> +			return;
> +		}
> +	}
> +
> +	/*
> +	 * Here we can directly remove user access since the user does not have
> +	 * access to the user page anymore so we avoid the racy window where the
> +	 * user could have read cap_user_rdpmc to true right before we disable
> +	 * it.
> +	 */
> +	event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT;
> +
> +	if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
> +		on_each_cpu_mask(mm_cpumask(mm),
> +				 pmu_sbi_reset_scounteren, (void *)event, 1);
> +}
> +
> +static void riscv_pmu_update_counter_access(void *info)
> +{
> +	if (sysctl_perf_user_access == SYSCTL_LEGACY)
> +		csr_write(CSR_SCOUNTEREN, 0x7);
> +	else
> +		csr_write(CSR_SCOUNTEREN, 0x2);
> +}
> +
> +static int riscv_pmu_proc_user_access_handler(struct ctl_table *table,
> +					      int write, void *buffer,
> +					      size_t *lenp, loff_t *ppos)
> +{
> +	int prev = sysctl_perf_user_access;
> +	int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
> +
> +	/*
> +	 * Test against the previous value since we clear SCOUNTEREN when
> +	 * sysctl_perf_user_access is set to SYSCTL_USER_ACCESS, but we should
> +	 * not do that if that was already the case.
> +	 */
> +	if (ret || !write || prev == sysctl_perf_user_access)
> +		return ret;
> +
> +	on_each_cpu(riscv_pmu_update_counter_access, NULL, 1);
> +
> +	return 0;
> +}
> +
> +static struct ctl_table sbi_pmu_sysctl_table[] = {
> +	{
> +		.procname       = "perf_user_access",
> +		.data		= &sysctl_perf_user_access,
> +		.maxlen		= sizeof(unsigned int),
> +		.mode           = 0644,
> +		.proc_handler	= riscv_pmu_proc_user_access_handler,
> +		.extra1		= SYSCTL_ZERO,
> +		.extra2		= SYSCTL_TWO,
> +	},
> +	{ }
> +};
> +
>  static int pmu_sbi_device_probe(struct platform_device *pdev)
>  {
>  	struct riscv_pmu *pmu = NULL;
> @@ -888,6 +1062,10 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>  	pmu->ctr_get_width = pmu_sbi_ctr_get_width;
>  	pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
>  	pmu->ctr_read = pmu_sbi_ctr_read;
> +	pmu->event_init = pmu_sbi_event_init;
> +	pmu->event_mapped = pmu_sbi_event_mapped;
> +	pmu->event_unmapped = pmu_sbi_event_unmapped;
> +	pmu->csr_index = pmu_sbi_csr_index;
>  
>  	ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
>  	if (ret)
> @@ -901,6 +1079,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto out_unregister;
>  
> +	register_sysctl("kernel", sbi_pmu_sysctl_table);
> +
>  	return 0;
>  
>  out_unregister:
> -- 
> 2.39.2
>

Other than the nits,

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

Thanks,
drew

Re: [PATCH v3 07/10] drivers: perf: Implement perf event mmap support in the SBI backend

[Alexandre Ghiti]

On Fri, Jun 30, 2023 at 1:08 PM Andrew Jones <ajones@ventanamicro.com> wrote:
>
> On Fri, Jun 30, 2023 at 10:30:10AM +0200, Alexandre Ghiti wrote:
> > We used to unconditionnally expose the cycle and instret csrs to
> > userspace, which gives rise to security concerns.
> >
> > So now we only allow access to hw counters from userspace through the perf
> > framework which will handle context switches, per-task events...etc. But
> > as we cannot break userspace, we give the user the choice to go back to
> > the previous behaviour by setting the sysctl perf_user_access.
> >
> > Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> > ---
> >  drivers/perf/riscv_pmu.c     |   9 +-
> >  drivers/perf/riscv_pmu_sbi.c | 192 +++++++++++++++++++++++++++++++++--
> >  2 files changed, 194 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/perf/riscv_pmu.c b/drivers/perf/riscv_pmu.c
> > index e1b0992f34df..80c052e93f9e 100644
> > --- a/drivers/perf/riscv_pmu.c
> > +++ b/drivers/perf/riscv_pmu.c
> > @@ -38,8 +38,15 @@ void arch_perf_update_userpage(struct perf_event *event,
> >       userpg->cap_user_time_short = 0;
> >       userpg->cap_user_rdpmc = riscv_perf_user_access(event);
> >
> > +#ifdef CONFIG_RISCV_PMU
> > +     /*
> > +      * The counters are 64-bit but the priv spec doesn't mandate all the
> > +      * bits to be implemented: that's why, counter width can vary based on
> > +      * the cpu vendor.
> > +      */
> >       if (userpg->cap_user_rdpmc)
> > -             userpg->pmc_width = 64;
> > +             userpg->pmc_width = to_riscv_pmu(event->pmu)->ctr_get_width(event->hw.idx) + 1;
> > +#endif
> >
> >       do {
> >               rd = sched_clock_read_begin(&seq);
> > diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
> > index 83c3f1c4d2f1..acabb6c273c1 100644
> > --- a/drivers/perf/riscv_pmu_sbi.c
> > +++ b/drivers/perf/riscv_pmu_sbi.c
> > @@ -24,6 +24,14 @@
> >  #include <asm/sbi.h>
> >  #include <asm/hwcap.h>
> >
> > +#define SYSCTL_NO_USER_ACCESS        0
> > +#define SYSCTL_USER_ACCESS   1
> > +#define SYSCTL_LEGACY                2
> > +
> > +#define PERF_EVENT_FLAG_NO_USER_ACCESS       BIT(SYSCTL_NO_USER_ACCESS)
> > +#define PERF_EVENT_FLAG_USER_ACCESS  BIT(SYSCTL_USER_ACCESS)
> > +#define PERF_EVENT_FLAG_LEGACY               BIT(SYSCTL_LEGACY)
> > +
> >  PMU_FORMAT_ATTR(event, "config:0-47");
> >  PMU_FORMAT_ATTR(firmware, "config:63");
> >
> > @@ -43,6 +51,9 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
> >       NULL,
> >  };
> >
> > +/* Allow user mode access by default */
> > +static int sysctl_perf_user_access __read_mostly = SYSCTL_USER_ACCESS;
> > +
> >  /*
> >   * RISC-V doesn't have heterogeneous harts yet. This need to be part of
> >   * per_cpu in case of harts with different pmu counters
> > @@ -301,6 +312,11 @@ int riscv_pmu_get_hpm_info(u32 *hw_ctr_width, u32 *num_hw_ctr)
> >  }
> >  EXPORT_SYMBOL_GPL(riscv_pmu_get_hpm_info);
> >
> > +static uint8_t pmu_sbi_csr_index(struct perf_event *event)
> > +{
> > +     return pmu_ctr_list[event->hw.idx].csr - CSR_CYCLE;
> > +}
> > +
> >  static unsigned long pmu_sbi_get_filter_flags(struct perf_event *event)
> >  {
> >       unsigned long cflags = 0;
> > @@ -329,18 +345,34 @@ static int pmu_sbi_ctr_get_idx(struct perf_event *event)
> >       struct cpu_hw_events *cpuc = this_cpu_ptr(rvpmu->hw_events);
> >       struct sbiret ret;
> >       int idx;
> > -     uint64_t cbase = 0;
> > +     uint64_t cbase = 0, cmask = rvpmu->cmask;
> >       unsigned long cflags = 0;
> >
> >       cflags = pmu_sbi_get_filter_flags(event);
> > +
> > +     /*
> > +      * In legacy mode, we have to force the fixed counters for those events
> > +      * but not in the user access mode as we want to use the other counters
> > +      * that support sampling/filtering.
> > +      */
> > +     if (hwc->flags & PERF_EVENT_FLAG_LEGACY) {
> > +             if (event->attr.config == PERF_COUNT_HW_CPU_CYCLES) {
> > +                     cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> > +                     cmask = 1;
> > +             } else if (event->attr.config == PERF_COUNT_HW_INSTRUCTIONS) {
> > +                     cflags |= SBI_PMU_CFG_FLAG_SKIP_MATCH;
> > +                     cmask = 1UL << (CSR_INSTRET - CSR_CYCLE);
> > +             }
> > +     }
> > +
> >       /* retrieve the available counter index */
> >  #if defined(CONFIG_32BIT)
> >       ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> > -                     rvpmu->cmask, cflags, hwc->event_base, hwc->config,
> > +                     cmask, cflags, hwc->event_base, hwc->config,
> >                       hwc->config >> 32);
> >  #else
> >       ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_CFG_MATCH, cbase,
> > -                     rvpmu->cmask, cflags, hwc->event_base, hwc->config, 0);
> > +                     cmask, cflags, hwc->event_base, hwc->config, 0);
> >  #endif
> >       if (ret.error) {
> >               pr_debug("Not able to find a counter for event %lx config %llx\n",
> > @@ -474,6 +506,14 @@ static u64 pmu_sbi_ctr_read(struct perf_event *event)
> >       return val;
> >  }
> >
> > +static void pmu_sbi_set_scounteren(void *arg)
> > +{
> > +     struct perf_event *event = (struct perf_event *)arg;
> > +
> > +     csr_write(CSR_SCOUNTEREN,
> > +               csr_read(CSR_SCOUNTEREN) | (1 << pmu_sbi_csr_index(event)));
> > +}
> > +
> >  static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
> >  {
> >       struct sbiret ret;
> > @@ -490,6 +530,18 @@ static void pmu_sbi_ctr_start(struct perf_event *event, u64 ival)
> >       if (ret.error && (ret.error != SBI_ERR_ALREADY_STARTED))
> >               pr_err("Starting counter idx %d failed with error %d\n",
> >                       hwc->idx, sbi_err_map_linux_errno(ret.error));
> > +
> > +     if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
> > +         hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)
>
> nit: Add () around the &'s. I thought checkpatch complained about that?

Hmm indeed, I already saw such warnings, but nothing pops up here,
I'll fix it anyway, thanks.

>
> > +             pmu_sbi_set_scounteren((void *)event);
> > +}
> > +
> > +static void pmu_sbi_reset_scounteren(void *arg)
> > +{
> > +     struct perf_event *event = (struct perf_event *)arg;
> > +
> > +     csr_write(CSR_SCOUNTEREN,
> > +               csr_read(CSR_SCOUNTEREN) & ~(1 << pmu_sbi_csr_index(event)));
> >  }
>
> nit: I'd collocate pmu_sbi_set_scounteren() and
> pmu_sbi_reset_scounteren() since they're counterparts.

Indeed, thanks

>
> >
> >  static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
> > @@ -497,6 +549,10 @@ static void pmu_sbi_ctr_stop(struct perf_event *event, unsigned long flag)
> >       struct sbiret ret;
> >       struct hw_perf_event *hwc = &event->hw;
> >
> > +     if (hwc->flags & PERF_EVENT_FLAG_USER_ACCESS &&
> > +         hwc->flags & PERF_EVENT_FLAG_USER_READ_CNT)
>
> nit: () around &'s
>
> > +             pmu_sbi_reset_scounteren((void *)event);
> > +
> >       ret = sbi_ecall(SBI_EXT_PMU, SBI_EXT_PMU_COUNTER_STOP, hwc->idx, 1, flag, 0, 0, 0);
> >       if (ret.error && (ret.error != SBI_ERR_ALREADY_STOPPED) &&
> >               flag != SBI_PMU_STOP_FLAG_RESET)
> > @@ -704,10 +760,13 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
> >       struct cpu_hw_events *cpu_hw_evt = this_cpu_ptr(pmu->hw_events);
> >
> >       /*
> > -      * Enable the access for CYCLE, TIME, and INSTRET CSRs from userspace,
> > -      * as is necessary to maintain uABI compatibility.
> > +      * We keep enabling userspace access to CYCLE, TIME and INSRET via the
> > +      * legacy option but that will be removed in the future.
> >        */
> > -     csr_write(CSR_SCOUNTEREN, 0x7);
> > +     if (sysctl_perf_user_access == SYSCTL_LEGACY)
> > +             csr_write(CSR_SCOUNTEREN, 0x7);
> > +     else
> > +             csr_write(CSR_SCOUNTEREN, 0x2);
> >
> >       /* Stop all the counters so that they can be enabled from perf */
> >       pmu_sbi_stop_all(pmu);
> > @@ -851,6 +910,121 @@ static void riscv_pmu_destroy(struct riscv_pmu *pmu)
> >       cpuhp_state_remove_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> >  }
> >
> > +static void pmu_sbi_event_init(struct perf_event *event)
> > +{
> > +     /*
> > +      * The permissions are set at event_init so that we do not depend
> > +      * on the sysctl value that can change.
> > +      */
> > +     if (sysctl_perf_user_access == SYSCTL_NO_USER_ACCESS)
> > +             event->hw.flags |= PERF_EVENT_FLAG_NO_USER_ACCESS;
> > +     else if (sysctl_perf_user_access == SYSCTL_USER_ACCESS)
> > +             event->hw.flags |= PERF_EVENT_FLAG_USER_ACCESS;
> > +     else
> > +             event->hw.flags |= PERF_EVENT_FLAG_LEGACY;
> > +}
> > +
> > +static void pmu_sbi_event_mapped(struct perf_event *event, struct mm_struct *mm)
> > +{
> > +     if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
> > +             return;
> > +
> > +     if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
> > +             if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
> > +                 event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
> > +                     return;
> > +             }
> > +     }
> > +
> > +     /*
> > +      * The user mmapped the event to directly access it: this is where
> > +      * we determine based on sysctl_perf_user_access if we grant userspace
> > +      * the direct access to this event. That means that within the same
> > +      * task, some events may be directly accessible and some other may not,
> > +      * if the user changes the value of sysctl_perf_user_accesss in the
> > +      * meantime.
> > +      */
> > +
> > +     event->hw.flags |= PERF_EVENT_FLAG_USER_READ_CNT;
> > +
> > +     /*
> > +      * We must enable userspace access *before* advertising in the user page
> > +      * that it is possible to do so to avoid any race.
> > +      * And we must notify all cpus here because threads that currently run
> > +      * on other cpus will try to directly access the counter too without
> > +      * calling pmu_sbi_ctr_start.
> > +      */
> > +     if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
> > +             on_each_cpu_mask(mm_cpumask(mm),
> > +                              pmu_sbi_set_scounteren, (void *)event, 1);
> > +}
> > +
> > +static void pmu_sbi_event_unmapped(struct perf_event *event, struct mm_struct *mm)
> > +{
> > +     if (event->hw.flags & PERF_EVENT_FLAG_NO_USER_ACCESS)
> > +             return;
> > +
> > +     if (event->hw.flags & PERF_EVENT_FLAG_LEGACY) {
> > +             if (event->attr.config != PERF_COUNT_HW_CPU_CYCLES &&
> > +                 event->attr.config != PERF_COUNT_HW_INSTRUCTIONS) {
> > +                     return;
> > +             }
> > +     }
> > +
> > +     /*
> > +      * Here we can directly remove user access since the user does not have
> > +      * access to the user page anymore so we avoid the racy window where the
> > +      * user could have read cap_user_rdpmc to true right before we disable
> > +      * it.
> > +      */
> > +     event->hw.flags &= ~PERF_EVENT_FLAG_USER_READ_CNT;
> > +
> > +     if (event->hw.flags & PERF_EVENT_FLAG_USER_ACCESS)
> > +             on_each_cpu_mask(mm_cpumask(mm),
> > +                              pmu_sbi_reset_scounteren, (void *)event, 1);
> > +}
> > +
> > +static void riscv_pmu_update_counter_access(void *info)
> > +{
> > +     if (sysctl_perf_user_access == SYSCTL_LEGACY)
> > +             csr_write(CSR_SCOUNTEREN, 0x7);
> > +     else
> > +             csr_write(CSR_SCOUNTEREN, 0x2);
> > +}
> > +
> > +static int riscv_pmu_proc_user_access_handler(struct ctl_table *table,
> > +                                           int write, void *buffer,
> > +                                           size_t *lenp, loff_t *ppos)
> > +{
> > +     int prev = sysctl_perf_user_access;
> > +     int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
> > +
> > +     /*
> > +      * Test against the previous value since we clear SCOUNTEREN when
> > +      * sysctl_perf_user_access is set to SYSCTL_USER_ACCESS, but we should
> > +      * not do that if that was already the case.
> > +      */
> > +     if (ret || !write || prev == sysctl_perf_user_access)
> > +             return ret;
> > +
> > +     on_each_cpu(riscv_pmu_update_counter_access, NULL, 1);
> > +
> > +     return 0;
> > +}
> > +
> > +static struct ctl_table sbi_pmu_sysctl_table[] = {
> > +     {
> > +             .procname       = "perf_user_access",
> > +             .data           = &sysctl_perf_user_access,
> > +             .maxlen         = sizeof(unsigned int),
> > +             .mode           = 0644,
> > +             .proc_handler   = riscv_pmu_proc_user_access_handler,
> > +             .extra1         = SYSCTL_ZERO,
> > +             .extra2         = SYSCTL_TWO,
> > +     },
> > +     { }
> > +};
> > +
> >  static int pmu_sbi_device_probe(struct platform_device *pdev)
> >  {
> >       struct riscv_pmu *pmu = NULL;
> > @@ -888,6 +1062,10 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
> >       pmu->ctr_get_width = pmu_sbi_ctr_get_width;
> >       pmu->ctr_clear_idx = pmu_sbi_ctr_clear_idx;
> >       pmu->ctr_read = pmu_sbi_ctr_read;
> > +     pmu->event_init = pmu_sbi_event_init;
> > +     pmu->event_mapped = pmu_sbi_event_mapped;
> > +     pmu->event_unmapped = pmu_sbi_event_unmapped;
> > +     pmu->csr_index = pmu_sbi_csr_index;
> >
> >       ret = cpuhp_state_add_instance(CPUHP_AP_PERF_RISCV_STARTING, &pmu->node);
> >       if (ret)
> > @@ -901,6 +1079,8 @@ static int pmu_sbi_device_probe(struct platform_device *pdev)
> >       if (ret)
> >               goto out_unregister;
> >
> > +     register_sysctl("kernel", sbi_pmu_sysctl_table);
> > +
> >       return 0;
> >
> >  out_unregister:
> > --
> > 2.39.2
> >
>
> Other than the nits,
>
> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

Great, thanks!

>
> Thanks,
> drew

[PATCH v3 08/10] Documentation: admin-guide: Add riscv sysctl_perf_user_access

[Alexandre Ghiti]

riscv now uses this sysctl so document its usage for this architecture.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
---
 Documentation/admin-guide/sysctl/kernel.rst | 26 +++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index d85d90f5d000..c376692b372b 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -941,16 +941,34 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
 The default value is 8.
 
 
-perf_user_access (arm64 only)
-=================================
+perf_user_access (arm64 and riscv only)
+=======================================
+
+Controls user space access for reading perf event counters.
 
-Controls user space access for reading perf event counters. When set to 1,
-user space can read performance monitor counter registers directly.
+arm64
+=====
 
 The default value is 0 (access disabled).
+When set to 1, user space can read performance monitor counter registers
+directly.
 
 See Documentation/arm64/perf.rst for more information.
 
+riscv
+=====
+
+When set to 0, user access is disabled.
+
+When set to 1, user space can read performance monitor counter registers
+directly only through perf, any direct access without perf intervention will
+trigger an illegal instruction.
+
+The default value is 2, which enables legacy mode (user space has direct
+access to cycle and insret CSRs only). Note that this legacy value
+is deprecated and will be removed once all userspace applications are fixed.
+
+Note that the time CSR is for now always accessible to all modes.
 
 pid_max
 =======
-- 
2.39.2

Re: [PATCH v3 08/10] Documentation: admin-guide: Add riscv sysctl_perf_user_access

[Andrew Jones]

On Fri, Jun 30, 2023 at 10:30:11AM +0200, Alexandre Ghiti wrote:
> riscv now uses this sysctl so document its usage for this architecture.
> 
> Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> ---
>  Documentation/admin-guide/sysctl/kernel.rst | 26 +++++++++++++++++----
>  1 file changed, 22 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
> index d85d90f5d000..c376692b372b 100644
> --- a/Documentation/admin-guide/sysctl/kernel.rst
> +++ b/Documentation/admin-guide/sysctl/kernel.rst
> @@ -941,16 +941,34 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
>  The default value is 8.
>  
>  
> -perf_user_access (arm64 only)
> -=================================
> +perf_user_access (arm64 and riscv only)
> +=======================================
> +
> +Controls user space access for reading perf event counters.
>  
> -Controls user space access for reading perf event counters. When set to 1,
> -user space can read performance monitor counter registers directly.
> +arm64
> +=====
>  
>  The default value is 0 (access disabled).

Should add a blank line here.

> +When set to 1, user space can read performance monitor counter registers
> +directly.
>  
>  See Documentation/arm64/perf.rst for more information.
>  
> +riscv
> +=====
> +
> +When set to 0, user access is disabled.
> +
> +When set to 1, user space can read performance monitor counter registers
> +directly only through perf, any direct access without perf intervention will

Remove 'directly only'

(It can't be both "direct" and "through" at the same time.)

> +trigger an illegal instruction.
> +
> +The default value is 2,

This is no longer true.

> which enables legacy mode (user space has direct
> +access to cycle and insret CSRs only). Note that this legacy value
> +is deprecated and will be removed once all userspace applications are fixed.
> +
> +Note that the time CSR is for now always accessible to all modes.

s/always accessible/always directly accessible/

Also, remove 'for now'. While we may change this in the future, I'm not
sure if the 'for now' helps much. Maybe a "This may change in the future."
type of sentence? Or, just nothing (for now :-) and we'll modify this
document if it changes later.

Thanks,
drew

>  
>  pid_max
>  =======
> -- 
> 2.39.2
> 

Re: [PATCH v3 08/10] Documentation: admin-guide: Add riscv sysctl_perf_user_access

[Alexandre Ghiti]

On Fri, Jun 30, 2023 at 1:16 PM Andrew Jones <ajones@ventanamicro.com> wrote:
>
> On Fri, Jun 30, 2023 at 10:30:11AM +0200, Alexandre Ghiti wrote:
> > riscv now uses this sysctl so document its usage for this architecture.
> >
> > Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
> > ---
> >  Documentation/admin-guide/sysctl/kernel.rst | 26 +++++++++++++++++----
> >  1 file changed, 22 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
> > index d85d90f5d000..c376692b372b 100644
> > --- a/Documentation/admin-guide/sysctl/kernel.rst
> > +++ b/Documentation/admin-guide/sysctl/kernel.rst
> > @@ -941,16 +941,34 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
> >  The default value is 8.
> >
> >
> > -perf_user_access (arm64 only)
> > -=================================
> > +perf_user_access (arm64 and riscv only)
> > +=======================================
> > +
> > +Controls user space access for reading perf event counters.
> >
> > -Controls user space access for reading perf event counters. When set to 1,
> > -user space can read performance monitor counter registers directly.
> > +arm64
> > +=====
> >
> >  The default value is 0 (access disabled).
>
> Should add a blank line here.

Done, thanks

>
> > +When set to 1, user space can read performance monitor counter registers
> > +directly.
> >
> >  See Documentation/arm64/perf.rst for more information.
> >
> > +riscv
> > +=====
> > +
> > +When set to 0, user access is disabled.
> > +
> > +When set to 1, user space can read performance monitor counter registers
> > +directly only through perf, any direct access without perf intervention will
>
> Remove 'directly only'
>
> (It can't be both "direct" and "through" at the same time.)
>
> > +trigger an illegal instruction.
> > +
> > +The default value is 2,
>
> This is no longer true.

Damn, sorry about that.

>
> > which enables legacy mode (user space has direct
> > +access to cycle and insret CSRs only). Note that this legacy value
> > +is deprecated and will be removed once all userspace applications are fixed.
> > +
> > +Note that the time CSR is for now always accessible to all modes.
>
> s/always accessible/always directly accessible/
>
> Also, remove 'for now'. While we may change this in the future, I'm not
> sure if the 'for now' helps much. Maybe a "This may change in the future."
> type of sentence? Or, just nothing (for now :-) and we'll modify this
> document if it changes later.

I won't say anything about the future, thanks!

I also harmonized the "user space" and "userspace" in this document
with what arm64 does.

Thanks

>
> Thanks,
> drew
>
> >
> >  pid_max
> >  =======
> > --
> > 2.39.2
> >

[PATCH v3 09/10] tools: lib: perf: Implement riscv mmap support

[Alexandre Ghiti]

riscv now supports mmaping hardware counters so add what's needed to
take advantage of that in libperf.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 tools/lib/perf/mmap.c | 65 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/tools/lib/perf/mmap.c b/tools/lib/perf/mmap.c
index 0d1634cedf44..378a163f0554 100644
--- a/tools/lib/perf/mmap.c
+++ b/tools/lib/perf/mmap.c
@@ -392,6 +392,71 @@ static u64 read_perf_counter(unsigned int counter)
 
 static u64 read_timestamp(void) { return read_sysreg(cntvct_el0); }
 
+#elif __riscv_xlen == 64
+
+/* TODO: implement rv32 support */
+
+#define CSR_CYCLE	0xc00
+#define CSR_TIME	0xc01
+
+#define csr_read(csr)						\
+({								\
+	register unsigned long __v;				\
+		__asm__ __volatile__ ("csrr %0, " #csr		\
+		 : "=r" (__v) :					\
+		 : "memory");					\
+		 __v;						\
+})
+
+static unsigned long csr_read_num(int csr_num)
+{
+#define switchcase_csr_read(__csr_num, __val)           {\
+	case __csr_num:                                 \
+		__val = csr_read(__csr_num);            \
+		break; }
+#define switchcase_csr_read_2(__csr_num, __val)         {\
+	switchcase_csr_read(__csr_num + 0, __val)        \
+	switchcase_csr_read(__csr_num + 1, __val)}
+#define switchcase_csr_read_4(__csr_num, __val)         {\
+	switchcase_csr_read_2(__csr_num + 0, __val)      \
+	switchcase_csr_read_2(__csr_num + 2, __val)}
+#define switchcase_csr_read_8(__csr_num, __val)         {\
+	switchcase_csr_read_4(__csr_num + 0, __val)      \
+	switchcase_csr_read_4(__csr_num + 4, __val)}
+#define switchcase_csr_read_16(__csr_num, __val)        {\
+	switchcase_csr_read_8(__csr_num + 0, __val)      \
+	switchcase_csr_read_8(__csr_num + 8, __val)}
+#define switchcase_csr_read_32(__csr_num, __val)        {\
+	switchcase_csr_read_16(__csr_num + 0, __val)     \
+	switchcase_csr_read_16(__csr_num + 16, __val)}
+
+	unsigned long ret = 0;
+
+	switch (csr_num) {
+	switchcase_csr_read_32(CSR_CYCLE, ret)
+	default:
+		break;
+	}
+
+	return ret;
+#undef switchcase_csr_read_32
+#undef switchcase_csr_read_16
+#undef switchcase_csr_read_8
+#undef switchcase_csr_read_4
+#undef switchcase_csr_read_2
+#undef switchcase_csr_read
+}
+
+static u64 read_perf_counter(unsigned int counter)
+{
+	return csr_read_num(CSR_CYCLE + counter);
+}
+
+static u64 read_timestamp(void)
+{
+	return csr_read_num(CSR_TIME);
+}
+
 #else
 static u64 read_perf_counter(unsigned int counter __maybe_unused) { return 0; }
 static u64 read_timestamp(void) { return 0; }
-- 
2.39.2

[PATCH v3 10/10] perf: tests: Adapt mmap-basic.c for riscv

[Alexandre Ghiti]

riscv now supports mmaping hardware counters to userspace so adapt the test
to run on this architecture.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
 tools/perf/tests/mmap-basic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/tests/mmap-basic.c b/tools/perf/tests/mmap-basic.c
index e68ca6229756..f5075ca774f8 100644
--- a/tools/perf/tests/mmap-basic.c
+++ b/tools/perf/tests/mmap-basic.c
@@ -284,7 +284,7 @@ static struct test_case tests__basic_mmap[] = {
 			 "permissions"),
 	TEST_CASE_REASON("User space counter reading of instructions",
 			 mmap_user_read_instr,
-#if defined(__i386__) || defined(__x86_64__) || defined(__aarch64__)
+#if defined(__i386__) || defined(__x86_64__) || defined(__aarch64__) || __riscv_xlen == 64
 			 "permissions"
 #else
 			 "unsupported"
@@ -292,7 +292,7 @@ static struct test_case tests__basic_mmap[] = {
 		),
 	TEST_CASE_REASON("User space counter reading of cycles",
 			 mmap_user_read_cycles,
-#if defined(__i386__) || defined(__x86_64__) || defined(__aarch64__)
+#if defined(__i386__) || defined(__x86_64__) || defined(__aarch64__) || __riscv_xlen == 64
 			 "permissions"
 #else
 			 "unsupported"
-- 
2.39.2