From: Ian Rogers <irogers@google.com>
To: Peter Zijlstra <peterz@infradead.org>,
Ingo Molnar <mingo@redhat.com>,
Arnaldo Carvalho de Melo <acme@kernel.org>,
Namhyung Kim <namhyung@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Jiri Olsa <jolsa@kernel.org>, Ian Rogers <irogers@google.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Bill Wendling <morbo@google.com>,
Justin Stitt <justinstitt@google.com>,
James Clark <james.clark@arm.com>,
Athira Jajeev <atrajeev@linux.vnet.ibm.com>,
Kan Liang <kan.liang@linux.intel.com>,
Yang Jihong <yangjihong1@huawei.com>,
linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
llvm@lists.linux.dev
Subject: [PATCH v3 8/8] perf tests: Add option to run tests in parallel
Date: Mon, 12 Feb 2024 10:58:58 -0800 [thread overview]
Message-ID: <20240212185858.68189-9-irogers@google.com> (raw)
In-Reply-To: <20240212185858.68189-1-irogers@google.com>
By default tests are forked, add an option (-p or --parallel) so that
the forked tests are all started in parallel and then their output
gathered serially. This is opt-in as running in parallel can cause
test flakes.
Rather than fork within the code, the start_command/finish_command
from libsubcmd are used. This changes how stderr and stdout are
handled. The child stderr and stdout are always read to avoid the
child blocking. If verbose is 1 (-v) then if the test fails the child
stdout and stderr are displayed. If the verbose is >1 (e.g. -vv) then
the stdout and stderr from the child are immediately displayed.
An unscientific test on my laptop shows the wall clock time for perf
test without parallel being 5 minutes 21 seconds and with parallel
(-p) being 1 minute 50 seconds.
Signed-off-by: Ian Rogers <irogers@google.com>
---
v1 of this code had a bug where stdout/stderr weren't read fully. This
and additional issues/improvements are dealt with in v2.
---
tools/perf/tests/builtin-test.c | 305 ++++++++++++++++++++++----------
1 file changed, 213 insertions(+), 92 deletions(-)
diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
index c42cb40fc242..b815db8ebf79 100644
--- a/tools/perf/tests/builtin-test.c
+++ b/tools/perf/tests/builtin-test.c
@@ -6,6 +6,7 @@
*/
#include <fcntl.h>
#include <errno.h>
+#include <poll.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
@@ -21,9 +22,11 @@
#include "debug.h"
#include "color.h"
#include <subcmd/parse-options.h>
+#include <subcmd/run-command.h>
#include "string2.h"
#include "symbol.h"
#include "util/rlimit.h"
+#include "util/strbuf.h"
#include <linux/kernel.h>
#include <linux/string.h>
#include <subcmd/exec-cmd.h>
@@ -31,7 +34,13 @@
#include "tests-scripts.h"
+/*
+ * Command line option to not fork the test running in the same process and
+ * making them easier to debug.
+ */
static bool dont_fork;
+/* Fork the tests in parallel and then wait for their completion. */
+static bool parallel;
const char *dso_to_test;
const char *test_objdump_path = "objdump";
@@ -209,76 +218,36 @@ static bool perf_test__matches(const char *desc, int curr, int argc, const char
return false;
}
-static int run_test(struct test_suite *test, int subtest)
-{
- int status, err = -1, child = dont_fork ? 0 : fork();
- char sbuf[STRERR_BUFSIZE];
-
- if (child < 0) {
- pr_err("failed to fork test: %s\n",
- str_error_r(errno, sbuf, sizeof(sbuf)));
- return -1;
- }
-
- if (!child) {
- if (!dont_fork) {
- pr_debug("test child forked, pid %d\n", getpid());
-
- if (verbose <= 0) {
- int nullfd = open("/dev/null", O_WRONLY);
-
- if (nullfd >= 0) {
- close(STDERR_FILENO);
- close(STDOUT_FILENO);
-
- dup2(nullfd, STDOUT_FILENO);
- dup2(STDOUT_FILENO, STDERR_FILENO);
- close(nullfd);
- }
- } else {
- signal(SIGSEGV, sighandler_dump_stack);
- signal(SIGFPE, sighandler_dump_stack);
- }
- }
-
- err = test_function(test, subtest)(test, subtest);
- if (!dont_fork)
- exit(err);
- }
-
- if (!dont_fork) {
- wait(&status);
+struct child_test {
+ struct child_process process;
+ struct test_suite *test;
+ int test_num;
+ int subtest;
+};
- if (WIFEXITED(status)) {
- err = (signed char)WEXITSTATUS(status);
- pr_debug("test child finished with %d\n", err);
- } else if (WIFSIGNALED(status)) {
- err = -1;
- pr_debug("test child interrupted\n");
- }
- }
+static int run_test_child(struct child_process *process)
+{
+ struct child_test *child = container_of(process, struct child_test, process);
+ int err;
- return err;
+ pr_debug("--- start ---\n");
+ pr_debug("test child forked, pid %d\n", getpid());
+ err = test_function(child->test, child->subtest)(child->test, child->subtest);
+ pr_debug("---- end(%d) ----\n", err);
+ fflush(NULL);
+ return -err;
}
-#define for_each_test(j, k, t) \
- for (j = 0, k = 0; j < ARRAY_SIZE(tests); j++, k = 0) \
- while ((t = tests[j][k++]) != NULL)
-
-static int test_and_print(struct test_suite *t, int subtest)
+static int print_test_result(struct test_suite *t, int i, int subtest, int result, int width)
{
- int err;
-
- pr_debug("\n--- start ---\n");
- err = run_test(t, subtest);
- pr_debug("---- end ----\n");
+ if (has_subtests(t)) {
+ int subw = width > 2 ? width - 2 : width;
- if (!has_subtests(t))
- pr_debug("%s:", t->desc);
- else
- pr_debug("%s subtest %d:", t->desc, subtest + 1);
+ pr_info("%3d.%1d: %-*s:", i + 1, subtest + 1, subw, test_description(t, subtest));
+ } else
+ pr_info("%3d: %-*s:", i + 1, width, test_description(t, subtest));
- switch (err) {
+ switch (result) {
case TEST_OK:
pr_info(" Ok\n");
break;
@@ -297,22 +266,177 @@ static int test_and_print(struct test_suite *t, int subtest)
break;
}
- return err;
+ return 0;
+}
+
+static int finish_test(struct child_test *child_test, int width)
+{
+ struct test_suite *t = child_test->test;
+ int i = child_test->test_num;
+ int subi = child_test->subtest;
+ int out = child_test->process.out;
+ int err = child_test->process.err;
+ bool out_done = out <= 0;
+ bool err_done = err <= 0;
+ struct strbuf out_output = STRBUF_INIT;
+ struct strbuf err_output = STRBUF_INIT;
+ int ret;
+
+ /*
+ * For test suites with subtests, display the suite name ahead of the
+ * sub test names.
+ */
+ if (has_subtests(t) && subi == 0)
+ pr_info("%3d: %-*s:\n", i + 1, width, test_description(t, -1));
+
+ /*
+ * Busy loop reading from the child's stdout and stderr that are set to
+ * be non-blocking until EOF.
+ */
+ if (!out_done)
+ fcntl(out, F_SETFL, O_NONBLOCK);
+ if (!err_done)
+ fcntl(err, F_SETFL, O_NONBLOCK);
+ if (verbose > 1) {
+ if (has_subtests(t))
+ pr_info("%3d.%1d: %s:\n", i + 1, subi + 1, test_description(t, subi));
+ else
+ pr_info("%3d: %s:\n", i + 1, test_description(t, -1));
+ }
+ while (!out_done || !err_done) {
+ struct pollfd pfds[2] = {
+ { .fd = out,
+ .events = POLLIN | POLLERR | POLLHUP | POLLNVAL,
+ },
+ { .fd = err,
+ .events = POLLIN | POLLERR | POLLHUP | POLLNVAL,
+ },
+ };
+ char buf[512];
+ ssize_t len;
+
+ /* Poll to avoid excessive spinning, timeout set for 1000ms. */
+ poll(pfds, ARRAY_SIZE(pfds), /*timeout=*/1000);
+ if (!out_done && pfds[0].revents) {
+ errno = 0;
+ len = read(out, buf, sizeof(buf) - 1);
+
+ if (len <= 0) {
+ out_done = errno != EAGAIN;
+ } else {
+ buf[len] = '\0';
+ if (verbose > 1)
+ fprintf(stdout, "%s", buf);
+ else
+ strbuf_addstr(&out_output, buf);
+ }
+ }
+ if (!err_done && pfds[1].revents) {
+ errno = 0;
+ len = read(err, buf, sizeof(buf) - 1);
+
+ if (len <= 0) {
+ err_done = errno != EAGAIN;
+ } else {
+ buf[len] = '\0';
+ if (verbose > 1)
+ fprintf(stdout, "%s", buf);
+ else
+ strbuf_addstr(&err_output, buf);
+ }
+ }
+ }
+ /* Clean up child process. */
+ ret = finish_command(&child_test->process);
+ if (verbose == 1 && ret == TEST_FAIL) {
+ /* Add header for test that was skipped above. */
+ if (has_subtests(t))
+ pr_info("%3d.%1d: %s:\n", i + 1, subi + 1, test_description(t, subi));
+ else
+ pr_info("%3d: %s:\n", i + 1, test_description(t, -1));
+ fprintf(stdout, "%s", out_output.buf);
+ fprintf(stderr, "%s", err_output.buf);
+ }
+ strbuf_release(&out_output);
+ strbuf_release(&err_output);
+ print_test_result(t, i, subi, ret, width);
+ if (out > 0)
+ close(out);
+ if (err > 0)
+ close(err);
+ return 0;
+}
+
+static int start_test(struct test_suite *test, int i, int subi, struct child_test **child,
+ int width)
+{
+ int err;
+
+ *child = NULL;
+ if (dont_fork) {
+ pr_debug("--- start ---\n");
+ err = test_function(test, subi)(test, subi);
+ pr_debug("---- end ----\n");
+ print_test_result(test, i, subi, err, width);
+ return 0;
+ }
+
+ *child = zalloc(sizeof(**child));
+ if (!*child)
+ return -ENOMEM;
+
+ (*child)->test = test;
+ (*child)->test_num = i;
+ (*child)->subtest = subi;
+ (*child)->process.pid = -1;
+ (*child)->process.no_stdin = 1;
+ if (verbose <= 0) {
+ (*child)->process.no_stdout = 1;
+ (*child)->process.no_stderr = 1;
+ } else {
+ (*child)->process.out = -1;
+ (*child)->process.err = -1;
+ }
+ (*child)->process.no_exec_cmd = run_test_child;
+ err = start_command(&(*child)->process);
+ if (err || parallel)
+ return err;
+ return finish_test(*child, width);
}
+#define for_each_test(j, k, t) \
+ for (j = 0, k = 0; j < ARRAY_SIZE(tests); j++, k = 0) \
+ while ((t = tests[j][k++]) != NULL)
+
static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
{
struct test_suite *t;
unsigned int j, k;
int i = 0;
int width = 0;
+ size_t num_tests = 0;
+ struct child_test **child_tests;
+ int child_test_num = 0;
for_each_test(j, k, t) {
int len = strlen(test_description(t, -1));
if (width < len)
width = len;
+
+ if (has_subtests(t)) {
+ for (int l = 0, subn = num_subtests(t); l < subn; l++) {
+ len = strlen(test_description(t, -1));
+ if (width < len)
+ width = len;
+ num_tests++;
+ }
+ } else
+ num_tests++;
}
+ child_tests = calloc(num_tests, sizeof(*child_tests));
+ if (!child_tests)
+ return -ENOMEM;
for_each_test(j, k, t) {
int curr = i++;
@@ -334,52 +458,47 @@ static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
continue;
}
- pr_info("%3d: %-*s:", i, width, test_description(t, -1));
-
if (intlist__find(skiplist, i)) {
+ pr_info("%3d: %-*s:", curr + 1, width, test_description(t, -1));
color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip (user override)\n");
continue;
}
if (!has_subtests(t)) {
- test_and_print(t, -1);
+ int err = start_test(t, curr, -1, &child_tests[child_test_num++], width);
+
+ if (err) {
+ /* TODO: if parallel waitpid the already forked children. */
+ free(child_tests);
+ return err;
+ }
} else {
int subn = num_subtests(t);
- /*
- * minus 2 to align with normal testcases.
- * For subtest we print additional '.x' in number.
- * for example:
- *
- * 35: Test LLVM searching and compiling :
- * 35.1: Basic BPF llvm compiling test : Ok
- */
- int subw = width > 2 ? width - 2 : width;
-
- if (subn <= 0) {
- color_fprintf(stderr, PERF_COLOR_YELLOW,
- " Skip (not compiled in)\n");
- continue;
- }
- pr_info("\n");
for (subi = 0; subi < subn; subi++) {
- int len = strlen(test_description(t, subi));
+ int err;
- if (subw < len)
- subw = len;
- }
-
- for (subi = 0; subi < subn; subi++) {
if (!perf_test__matches(test_description(t, subi),
curr, argc, argv))
continue;
- pr_info("%3d.%1d: %-*s:", i, subi + 1, subw,
- test_description(t, subi));
- test_and_print(t, subi);
+ err = start_test(t, curr, subi, &child_tests[child_test_num++],
+ width);
+ if (err)
+ return err;
}
}
}
+ for (i = 0; i < child_test_num; i++) {
+ if (parallel) {
+ int ret = finish_test(child_tests[i], width);
+
+ if (ret)
+ return ret;
+ }
+ free(child_tests[i]);
+ }
+ free(child_tests);
return 0;
}
@@ -447,6 +566,8 @@ int cmd_test(int argc, const char **argv)
"be more verbose (show symbol address, etc)"),
OPT_BOOLEAN('F', "dont-fork", &dont_fork,
"Do not fork for testcase"),
+ OPT_BOOLEAN('p', "parallel", ¶llel,
+ "Run the tests altogether in parallel"),
OPT_STRING('w', "workload", &workload, "work", "workload to run for testing"),
OPT_STRING(0, "dso", &dso_to_test, "dso", "dso to test"),
OPT_STRING(0, "objdump", &test_objdump_path, "path",
--
2.43.0.687.g38aa6559b0-goog
next prev parent reply other threads:[~2024-02-12 18:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-12 18:58 [PATCH v3 0/8] Run tests in parallel Ian Rogers
2024-02-12 18:58 ` [PATCH v3 1/8] perf thread_map: Skip exited threads when scanning /proc Ian Rogers
2024-02-12 18:58 ` [PATCH v3 2/8] perf list: Add scandirat compatibility function Ian Rogers
2024-02-12 18:58 ` [PATCH v3 3/8] perf tests: Avoid fork in perf_has_symbol test Ian Rogers
2024-02-12 18:58 ` [PATCH v3 4/8] tools subcmd: Add a no exec function call option Ian Rogers
2024-02-12 18:58 ` [PATCH v3 5/8] perf test: Rename builtin-test-list and add missed header guard Ian Rogers
2024-02-12 18:58 ` [PATCH v3 6/8] perf tests: Use scandirat for shell script finding Ian Rogers
2024-02-12 18:58 ` [PATCH v3 7/8] perf tests: Run time generate shell test suites Ian Rogers
2024-02-12 18:58 ` Ian Rogers [this message]
2024-02-14 1:14 ` [PATCH v3 8/8] perf tests: Add option to run tests in parallel Namhyung Kim
2024-02-14 4:33 ` Ian Rogers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240212185858.68189-9-irogers@google.com \
--to=irogers@google.com \
--cc=acme@kernel.org \
--cc=adrian.hunter@intel.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=atrajeev@linux.vnet.ibm.com \
--cc=james.clark@arm.com \
--cc=jolsa@kernel.org \
--cc=justinstitt@google.com \
--cc=kan.liang@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-perf-users@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=mark.rutland@arm.com \
--cc=mingo@redhat.com \
--cc=morbo@google.com \
--cc=namhyung@kernel.org \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=peterz@infradead.org \
--cc=yangjihong1@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).