Linux Perf Users
 help / color / mirror / Atom feed
From: Arnaldo Carvalho de Melo <acme@kernel.org>
To: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	James Clark <james.clark@linaro.org>,
	Jiri Olsa <jolsa@kernel.org>, Ian Rogers <irogers@google.com>,
	Adrian Hunter <adrian.hunter@intel.com>,
	Clark Williams <williams@redhat.com>,
	linux-kernel@vger.kernel.org, linux-perf-users@vger.kernel.org,
	Arnaldo Carvalho de Melo <acme@redhat.com>
Subject: [PATCH v6 02/13] perf scripts: Add a coverage harness for perf
Date: Tue, 17 Nov 2026 17:04:20 -0300	[thread overview]
Message-ID: <20261117200433.45174-3-acme@kernel.org> (raw)
In-Reply-To: <20261117200433.45174-1-acme@kernel.org>

From: Arnaldo Carvalho de Melo <acme@redhat.com>

Build perf with clang source based coverage, run the complete perf test
suite, merge the raw profiles and report line and function coverage,
optionally against a baseline.  This is pahole's coverage/coverage.sh +
coverage-diff.sh merged into one script, wired as
'make -C tools/perf coverage' and listed in 'make help'.

Without -f the report lists the files with the most uncovered lines,
which is where new tests should try to get more coverage; -t narrows
the tests, -f focuses on specific files, --html writes a browsable
report and --table/-T, also available as 'make -C tools/perf
coverage-table', prints the last run as an ASCII table with the
per-file line and function coverage, like pahole's coverage_table.py.

The build can be split from the test run: 'make -C tools/perf
coverage-prep' builds the instrumented perf and records the build
directory, and a later run as root, which needs no make, checks that
build, runs the tests and renders the report, or prints the table with
--table.  This is for running the tests that need root on the bare
metal host while the instrumented perf is built in the development
container.

The report covers the whole tree, not only the paths the tests walk, so
the per-file table is a map of what the suite does not reach in a given
run.  The uncovered line list and the failures the runs exposed are what
drove the rest of this series.

  $ make -C tools/perf coverage-prep O=~/coverage-build
  ...
  $ sudo scripts/coverage.sh
  ...
  Total: 104787 of 205810 lines covered (50.91%)
    perf: 85674 of 173247 lines covered (49.45%)

    largest uncovered files (>= 100 lines)
    file                                            lines     cover    missed  fn-cover
    util/intel-pt.c                                  3237     0.00%      3237     0.00%
    util/intel-pt-decoder/intel-pt-decoder.c         3208     0.00%      3208     0.00%
    ui/browsers/hists.c                              2730     0.00%      2730     0.00%
    builtin-sched.c                                  3737    41.26%      2195    43.97%
    builtin-script.c                                 3212    33.50%      2136    37.90%
    util/auxtrace.c                                  2013     4.47%      1923    11.11%
    util/session.c                                   2686    41.14%      1581    48.80%
    ...
  Report:  /home/acme/coverage-build/cov/report.txt

The total also counts the tools/ libraries and headers linked into
perf, the perf line is the tools/perf/ files alone.  The numbers above
are from the split run: coverage-prep built the instrumented perf as the
developer, the tests and the report ran as root.  This machine has no
Intel PT, so the PT tests skip and leave intel-pt.c and
intel-pt-decoder.c at 0.00%; the TUI browser is in the list because the
suite does not drive it.

'perf test' exits 0 even when tests fail or time out, so the script
takes its status from the "Failed tests :" and "Timed out tests :" lines
that perf test prints since commit 33f20342ba525ef7 ("perf test: Add
summary reporting").

168 tests passed, 28 skipped, one failure (20.2: Tracepoint event), in
code this series does not change.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/.gitignore          |   1 +
 tools/perf/Makefile            |  11 +-
 tools/perf/Makefile.perf       |   4 +
 tools/perf/scripts/coverage.sh | 984 +++++++++++++++++++++++++++++++++
 4 files changed, 999 insertions(+), 1 deletion(-)
 create mode 100755 tools/perf/scripts/coverage.sh

diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index 3b968c5158b822ce..9052f25597ac9489 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -27,6 +27,7 @@ stats-*.csv
 cscope*
 config.mak
 config.mak.autogen
+.coverage-build-dir
 *-bison.*
 *-flex.*
 *.pyc
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 00baf90e5bda7123..8df8e9ed37f0a8f5 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -140,6 +140,15 @@ check-headers:
 sync-headers:
 	@./scripts/sync-headers.sh $(SYNC_HEADERS_ARGS)
 
+coverage-prep:
+	@./scripts/coverage.sh --prep $(if $(FULL_O),--build-dir=$(FULL_O)) $(COVERAGE_ARGS)
+
+coverage:
+	@./scripts/coverage.sh $(if $(FULL_O),--build-dir=$(FULL_O)) $(COVERAGE_ARGS)
+
+coverage-table:
+	@./scripts/coverage.sh --table $(if $(FULL_O),--build-dir=$(FULL_O)) $(COVERAGE_ARGS)
+
 #
 # All other targets get passed through:
 #
@@ -147,4 +156,4 @@ sync-headers:
 	$(print_msg)
 	$(make)
 
-.PHONY: all clean tags TAGS FORCE Makefile build-test build-test-tarball check-headers sync-headers
+.PHONY: all clean tags TAGS FORCE Makefile build-test build-test-tarball check-headers sync-headers coverage coverage-prep coverage-table
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 9f3e248d5c4efff8..6ca39ac86599bcad 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -873,6 +873,10 @@ help:
 	@echo '  check-headers		- check which header copies are out of sync with the kernel'
 	@echo '  sync-headers		- sync those header copies with the kernel, creating commits'
 	@echo '			  (SYNC_HEADERS_ARGS="..." passes options to the script)'
+	@echo '  coverage-prep		- build perf with clang coverage, ready for a root test run'
+	@echo '  coverage		- build perf with clang coverage, run the tests and report'
+	@echo '  coverage-table	- print an ASCII table of the last coverage run'
+	@echo '			  (COVERAGE_ARGS="..." passes options to the script)'
 
 
 DOC_TARGETS := doc man html info pdf
diff --git a/tools/perf/scripts/coverage.sh b/tools/perf/scripts/coverage.sh
new file mode 100755
index 0000000000000000..073d665229697269
--- /dev/null
+++ b/tools/perf/scripts/coverage.sh
@@ -0,0 +1,984 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2026, Red Hat Inc, Arnaldo Carvalho de Melo <acme@redhat.com>
+#
+# LLVM source-based coverage for perf: build with clang instrumentation,
+# run the complete perf test suite and report line/function coverage for
+# perf, optionally comparing it against a previously saved report.  -t
+# narrows the tests and -f adds files to the per-file table; without -f
+# the report lists the files with the most uncovered lines, which is
+# where new tests are needed.  --table prints the last run as an ASCII
+# coverage table, like pahole's coverage_table.py.  The build can be
+# split from the test run: --prep builds the instrumented perf and
+# records the build directory, and a later run as root uses that build,
+# skips the build and goes straight to the tests, unless --build is
+# given.  The sampling based tests move the percentages by a percent or
+# two between identical runs.
+
+set -euo pipefail
+
+PERF_DIR=$(cd "$(dirname "$0")/.." && pwd -P)
+TOOLS_DIR=$(cd "$PERF_DIR/.." && pwd -P)
+SRC_DIR=$(cd "$TOOLS_DIR/.." && pwd -P)
+
+# perf links objects from these directories, so a change in any of them
+# makes a build and a profile stale.
+PERF_SOURCES=("$PERF_DIR" "$TOOLS_DIR/lib/perf" "$TOOLS_DIR/lib/api"
+	      "$TOOLS_DIR/lib/subcmd" "$TOOLS_DIR/lib/bpf"
+	      "$TOOLS_DIR/include")
+
+DEFAULT_BUILD_DIR=/tmp/build/perf-coverage
+BUILD_DIR=${BUILD_DIR:-}
+COV_DIR=${COV_DIR:-}
+BUILD_DIR_SET=0
+COV_DIR_SET=0
+[ -n "$BUILD_DIR" ] && BUILD_DIR_SET=1
+[ -n "$COV_DIR" ] && COV_DIR_SET=1
+JOBS=${JOBS:-$(nproc 2>/dev/null || echo 1)}
+LLVM_PROFDATA=${LLVM_PROFDATA:-llvm-profdata}
+LLVM_COV=${LLVM_COV:-llvm-cov}
+
+DEBUG_BUILD=1
+SKIP_BUILD=0
+FORCE_BUILD=0
+REPORT_ONLY=0
+PREP=0
+TABLE=0
+HTML=0
+USE_BASELINE=1
+BASELINE=
+BASELINE_SET=0
+UNCOVERED=${UNCOVERED:-20}
+TOP=${TOP:-20}
+MIN_LINES=${MIN_LINES:-100}
+DWARF_VERSION=${DWARF_VERSION:-4}
+TESTS=()
+
+FOCUS=()
+
+ROOT=0
+[ "$(id -u)" = 0 ] && ROOT=1
+
+say()  { printf '\033[1;34m==>\033[0m %s\n' "$*"; }
+warn() { printf '\033[0;33mwarning:\033[0m %s\n' "$*" >&2; }
+die()  { printf '\033[0;31merror:\033[0m %s\n' "$*" >&2; exit 1; }
+
+usage()
+{
+	cat <<EOF
+Usage: scripts/coverage.sh [options] [test name fragment...]
+
+Builds perf with clang source-based coverage, runs the complete perf
+test suite and reports coverage for perf.  Use -t to run a subset and
+-f to focus the per-file table.
+
+Options:
+  -b, --build-dir DIR    perf build directory (default: $DEFAULT_BUILD_DIR)
+  -c, --cov-dir DIR      profiles and reports (default: BUILD_DIR/cov)
+  -j, --jobs N           parallel build jobs (default: $JOBS)
+  -t, --tests "A;B"      test name fragments, ';' separated (default: all);
+                         a subset run does not update the baseline
+  -f, --focus FILE       add a file to the per-file table (repeatable)
+      --top N            when no -f is given, show the N files with the
+                         most uncovered lines (default: $TOP, 0 to disable)
+      --baseline FILE    compare against FILE, keeping it read-only
+                         (default: COV_DIR/baseline.txt, which a full run
+                         saves for the next one)
+      --no-baseline      do not compare against or update a baseline
+      --uncovered N      uncovered line numbers per focus file (default: $UNCOVERED)
+      --skip-build       reuse the existing build, just run the tests
+      --build            build as root even when a prepared build exists
+      --report-only      reuse build and profiles, just render the report
+      --prep             build the instrumented perf and stop; run the
+                         tests later as root with this script
+  -T, --table            print an ASCII table of the last run and exit,
+                         like pahole's coverage_table.py
+      --optimized        build with perf's default -O3 instead of -O0 -g
+      --dwarf-version N  DWARF version for the instrumented build (default: $DWARF_VERSION)
+      --html             also write an HTML report
+  -h, --help             show this help
+
+Environment:
+  BUILD_DIR, COV_DIR, JOBS, LLVM_COV, LLVM_PROFDATA, UNCOVERED, TOP,
+  MIN_LINES, DWARF_VERSION
+
+As root, without --prep or --build, the script uses the build prepared
+by 'make coverage-prep' when there is one, and builds otherwise.  The
+prepared build is recorded in tools/perf/.coverage-build-dir.
+
+Through make:
+  make -C tools/perf coverage COVERAGE_ARGS="-t 'perf annotate'"
+  make -C tools/perf coverage-prep O=/tmp/build/perf-tools-next
+  make -C tools/perf coverage-table
+
+Examples:
+  scripts/coverage.sh                       # full suite, fresh build
+  scripts/coverage.sh --prep                # build only, test later as root
+  scripts/coverage.sh --report-only         # re-render the last run
+  scripts/coverage.sh --table               # ASCII table of the last run
+  scripts/coverage.sh -t "perf annotate"    # a single test fragment
+  scripts/coverage.sh -f util/evsel.c       # add a file to the table
+EOF
+}
+
+while [ $# -gt 0 ]; do
+	arg=$1
+	optval=
+	case "$arg" in
+	--*=*) optval=${arg#*=}; arg=${arg%%=*}
+	       [ -n "$optval" ] || die "$arg needs a value" ;;
+	esac
+
+	case "$arg" in
+	-b|--build-dir)   BUILD_DIR=${optval:-${2?missing value}}; BUILD_DIR_SET=1
+	                  [ -z "$optval" ] && shift ;;
+	-c|--cov-dir)     COV_DIR=${optval:-${2?missing value}}; COV_DIR_SET=1
+	                  [ -z "$optval" ] && shift ;;
+	-j|--jobs)        JOBS=${optval:-${2?missing value}}; [ -z "$optval" ] && shift ;;
+	-f|--focus)       FOCUS+=("${optval:-${2?missing value}}"); [ -z "$optval" ] && shift ;;
+	--baseline)       BASELINE=${optval:-${2?missing value}}; BASELINE_SET=1
+	                  [ -z "$optval" ] && shift ;;
+	--uncovered)      UNCOVERED=${optval:-${2?missing value}}; [ -z "$optval" ] && shift ;;
+	--top)            TOP=${optval:-${2?missing value}}; [ -z "$optval" ] && shift ;;
+	--dwarf-version)  DWARF_VERSION=${optval:-${2?missing value}}; [ -z "$optval" ] && shift ;;
+	-t|--tests)       IFS=';' read -r -a _t <<< "${optval:-${2?missing value}}"
+	                  TESTS+=("${_t[@]}"); [ -z "$optval" ] && shift ;;
+	--no-baseline)    USE_BASELINE=0 ;;
+	--skip-build)     SKIP_BUILD=1 ;;
+	--build)          FORCE_BUILD=1; SKIP_BUILD=0 ;;
+	--report-only)    REPORT_ONLY=1; SKIP_BUILD=1 ;;
+	--prep)           PREP=1 ;;
+	-T|--table)       TABLE=1; REPORT_ONLY=1; SKIP_BUILD=1 ;;
+	--optimized)      DEBUG_BUILD=0 ;;
+	--html)           HTML=1 ;;
+	-h|--help)        usage; exit 0 ;;
+	-*)               die "unknown option: $arg (see --help)" ;;
+	*)                TESTS+=("$arg") ;;
+	esac
+	shift
+done
+
+#
+# The build directory is recorded by --prep (and by a full run) so a
+# later root run, which does not build, finds it without arguments.
+#
+if [ "$BUILD_DIR_SET" = 0 ] && [ "$PREP" = 0 ] &&
+   { [ "$ROOT" = 1 ] || [ "$SKIP_BUILD" = 1 ] ||
+     [ "$REPORT_ONLY" = 1 ] || [ "$TABLE" = 1 ]; } &&
+   [ -f "$PERF_DIR/.coverage-build-dir" ]; then
+	read -r BUILD_DIR < "$PERF_DIR/.coverage-build-dir"
+fi
+[ -n "$BUILD_DIR" ] || BUILD_DIR=$DEFAULT_BUILD_DIR
+
+if [ "$COV_DIR_SET" = 0 ] && [ -f "$BUILD_DIR/cov/state" ]; then
+	COV_DIR=$(awk -F= '$1 == "COV_DIR" { print $2; exit }' \
+		"$BUILD_DIR/cov/state")
+fi
+[ -n "$COV_DIR" ] || COV_DIR=$BUILD_DIR/cov
+
+# The tests run from the kernel tree root, so keep these absolute.  The
+# Makefile passes FULL_O resolved with readlink -f; resolve here too so an
+# in-tree build directory compares equal to the physical PERF_DIR below.
+abspath()
+{
+	realpath -m "$1"
+}
+BUILD_DIR=$(abspath "$BUILD_DIR")
+COV_DIR=$(abspath "$COV_DIR")
+
+# llvm-cov strips the prefix all reported files share.  A build inside
+# tools/perf makes the rows read perf/<build>/..., so BUILD_REL lets the
+# report leave those generated files out; it is empty for any other layout.
+BUILD_REL=
+case "$BUILD_DIR" in
+"$PERF_DIR"/*) BUILD_REL=${BUILD_DIR#"$PERF_DIR"/} ;;
+esac
+
+[ -n "$BASELINE" ] || BASELINE=$COV_DIR/baseline.txt
+[[ $TOP =~ ^[0-9]+$ ]] || die "--top wants a number, not '$TOP'"
+[[ $MIN_LINES =~ ^[0-9]+$ ]] || die "MIN_LINES wants a number, not '$MIN_LINES'"
+
+# Root does not rebuild a prepared build unless asked: use the perf
+# prepared by coverage-prep, or build when there is none.
+if [ "$ROOT" = 1 ] && [ "$PREP" = 0 ] && [ "$TABLE" = 0 ]; then
+	if [ "$REPORT_ONLY" = 0 ] && [ "$SKIP_BUILD" = 0 ] &&
+	   { [ "$FORCE_BUILD" = 1 ] ||
+	     { [ ! -f "$PERF_DIR/.coverage-build-dir" ] &&
+	       [ ! -x "$BUILD_DIR/perf" ]; }; }; then
+		say "Running as root, building perf in $BUILD_DIR"
+	else
+		SKIP_BUILD=1
+		say "Running as root, using the coverage build in $BUILD_DIR"
+	fi
+fi
+
+#
+# Under sudo the build directory comes from a file the invoking user wrote;
+# root would execute the perf found there and delete and rewrite its cov/
+# directory, so refuse one owned by somebody else or writable by another
+# group or by others.  Every parent is checked too: a directory another
+# user can write lets them swap an entry between this check and the run.
+#
+check_root_path()
+{
+	local path=$1 uid gid mode
+	[ "$ROOT" = 1 ] && [ -n "${SUDO_UID:-}" ] || return 0
+	# abspath() resolves links such as /home -> /var/home on Silverblue
+	# and CoreOS, so the walk below checks their targets.  A path not
+	# resolved that way, like $BUILD_DIR/perf, must not be a link.
+	[ -L "$path" ] && die "$path is a symbolic link, use its target"
+	while :; do
+		if [ -e "$path" ]; then
+			if ! read -r uid gid mode < \
+				<(stat -c '%u %g %a' "$path" 2>/dev/null); then
+				die "could not stat $path"
+			fi
+			# A sticky directory (/tmp) lets anybody create entries
+			# but not replace one that belongs to somebody else.
+			if [ $(( 8#$mode & 8#1000 )) = 0 ]; then
+				[ "$uid" = 0 ] || [ "$uid" = "$SUDO_UID" ] ||
+					die "$path is owned by uid $uid, not by root or $SUDO_UID"
+				# A user private group with umask 002
+				# gives 775, so only the developer's
+				# own group may write here.
+				[ $(( 8#$mode & 8#002 )) = 0 ] ||
+					die "$path is writable by others"
+				if [ $(( 8#$mode & 8#020 )) != 0 ] &&
+				   [ "$gid" != "${SUDO_GID:-}" ]; then
+					die "$path is writable by group $gid"
+				fi
+			fi
+		fi
+		[ "$path" = / ] && return 0
+		path=$(dirname "$path")
+	done
+}
+
+check_root_path "$BUILD_DIR"
+check_root_path "$BUILD_DIR/perf"
+check_root_path "$COV_DIR"
+
+#
+# A root run leaves the files it writes owned by root; give them back to the
+# developer, or the next non-root run cannot clean raw/ or move the baseline.
+# The uid comes from sudo, or from the kernel tree when root runs in a
+# container with the tree mounted from the host.  Only the directories this
+# run created are chowned recursively: a mistyped --cov-dir or --build-dir
+# must not hand a shared or system tree to the developer.
+#
+COV_WRITES=(raw html build.log tests.log report.txt perf.profdata profiles.txt
+	    merge.log baseline.txt baseline.txt.prev)
+
+fix_ownership()
+{
+	local uid gid path
+	[ "$ROOT" = 1 ] || return 0
+	if [ -n "${SUDO_UID:-}" ]; then
+		uid=$SUDO_UID
+		gid=${SUDO_GID:-$SUDO_UID}
+	else
+		read -r uid gid < <(stat -c '%u %g' "$PERF_DIR" 2>/dev/null) || return 0
+	fi
+	[ "$uid" != 0 ] || return 0
+
+	for path in "${COV_WRITES[@]}"; do
+		[ -e "$COV_DIR/$path" ] || continue
+		chown -R "$uid:$gid" "$COV_DIR/$path" ||
+			warn "could not give $COV_DIR/$path back to uid $uid"
+	done
+	if [ "$COV_CREATED" = 1 ]; then
+		chown "$uid:$gid" "$COV_DIR" ||
+			warn "could not give $COV_DIR back to uid $uid"
+	fi
+	if [ "$BUILD_CREATED" = 1 ]; then
+		chown -R "$uid:$gid" "$BUILD_DIR" ||
+			warn "could not give $BUILD_DIR back to uid $uid"
+	fi
+	if [ -n "$BUILD_STAMP" ] && [ -f "$BUILD_STAMP" ]; then
+		# -h: find matches a symlink by its own owner, but chown would
+		# otherwise follow it and change a file outside the build tree.
+		find "$BUILD_DIR" -user 0 -newer "$BUILD_STAMP" \
+			-exec chown -h "$uid:$gid" {} + ||
+			warn "could not give the files root built in $BUILD_DIR back to uid $uid"
+		rm -f "$BUILD_STAMP" || true
+	fi
+	if [ "$STATE_DIR_CREATED" = 1 ] && [ -d "$STATE_DIR" ]; then
+		chown "$uid:$gid" "$STATE_DIR" ||
+			warn "could not give $STATE_DIR back to uid $uid"
+	fi
+	if [ -f "$STATE_FILE" ]; then
+		chown "$uid:$gid" "$STATE_FILE" ||
+			warn "could not give $STATE_FILE back to uid $uid"
+	fi
+	if [ -f "$POINTER" ]; then
+		chown "$uid:$gid" "$POINTER" ||
+			warn "could not give $POINTER back to uid $uid"
+	fi
+}
+
+BUILD_LOG=$COV_DIR/build.log
+TEST_LOG=$COV_DIR/tests.log
+REPORT=$COV_DIR/report.txt
+PROFDATA=$COV_DIR/perf.profdata
+# Discovery point for a later root or --table run, so it stays under
+# BUILD_DIR even when --cov-dir points elsewhere.
+STATE_FILE=$BUILD_DIR/cov/state
+STATE_DIR=$(dirname "$STATE_FILE")
+POINTER=$PERF_DIR/.coverage-build-dir
+
+# What exists before this run writes anything: fix_ownership() chowns a
+# shared COV_DIR or BUILD_DIR only when root created it.
+COV_CREATED=0
+[ -d "$COV_DIR" ] || COV_CREATED=1
+BUILD_CREATED=0
+[ -d "$BUILD_DIR" ] || BUILD_CREATED=1
+STATE_DIR_CREATED=0
+[ -d "$STATE_DIR" ] || STATE_DIR_CREATED=1
+# An existing build directory is not chowned as a whole: a stamp taken
+# when the build starts marks the files a root build writes.
+BUILD_STAMP=
+
+#
+# Sanity checks
+#
+for src in "${PERF_SOURCES[@]}"; do
+	[ -d "$src" ] || die "$src not found"
+done
+case "$BUILD_DIR" in
+"$PERF_DIR"|"$TOOLS_DIR"|"$SRC_DIR")
+	die "$BUILD_DIR would mix generated files with the sources, use -b DIR" ;;
+esac
+
+if [ "$TABLE" = 0 ]; then
+	if [ "$PREP" = 0 ]; then
+		command -v "$LLVM_COV" > /dev/null ||
+			die "$LLVM_COV not found (set LLVM_COV)"
+	fi
+	if [ "$SKIP_BUILD" = 0 ]; then
+		command -v clang > /dev/null ||
+			die "clang not found, it is the only compiler with -fcoverage-mapping"
+	fi
+	if [ "$PREP" = 0 ] && [ "$REPORT_ONLY" = 0 ]; then
+		command -v "$LLVM_PROFDATA" > /dev/null ||
+			die "$LLVM_PROFDATA not found (set LLVM_PROFDATA)"
+	fi
+	mkdir -p "$COV_DIR"
+fi
+
+#
+# Build: clang, DEBUG=1 gives -O0 -g like pahole's coverage build, which
+# keeps the line mapping honest at the cost of slower test runs.  DWARF 4
+# is the default; --dwarf-version 5 describes the workloads linked into
+# perf with DW_OP_addrx, the encoding clang uses for globals in DWARF 5.
+#
+check_coverage_build()
+{
+	[ -x "$BUILD_DIR/perf" ] ||
+		die "no $BUILD_DIR/perf, run 'make -C $PERF_DIR O=$BUILD_DIR" \
+		    "coverage-prep' first, or pass --build"
+	if command -v nm > /dev/null; then
+		# No -q: grep reads all of nm's output, so pipefail does
+		# not see a SIGPIPE from an early exit.
+		nm "$BUILD_DIR/perf" 2>/dev/null |
+			grep '__llvm_profile' > /dev/null ||
+			die "$BUILD_DIR/perf was not built for coverage, run coverage-prep"
+	else
+		warn "nm not found, cannot verify that $BUILD_DIR/perf is instrumented"
+	fi
+}
+
+write_state()
+{
+	mkdir -p "$STATE_DIR" ||
+		die "could not create $STATE_DIR"
+	{
+		printf 'BUILD_DIR=%s\n' "$BUILD_DIR"
+		printf 'COV_DIR=%s\n' "$COV_DIR"
+		printf 'DEBUG_BUILD=%s\n' "$DEBUG_BUILD"
+		printf 'DWARF_VERSION=%s\n' "$DWARF_VERSION"
+	} > "$STATE_FILE" || die "could not write $STATE_FILE"
+
+	if ! printf '%s\n' "$BUILD_DIR" > "$POINTER" 2>/dev/null; then
+		warn "could not write $POINTER, root runs will need -b $BUILD_DIR"
+	fi
+}
+
+#
+# A source file newer than $1, if any, skipping the build directory.
+#
+newer_sources()
+{
+	find "${PERF_SOURCES[@]}" -path "$BUILD_DIR" -prune -o \
+		-name '*.[ch]' -newer "$1" -print -quit 2>/dev/null || true
+}
+
+check_build_freshness()
+{
+	local newer
+	[ -x "$BUILD_DIR/perf" ] || return 0
+	newer=$(newer_sources "$BUILD_DIR/perf")
+	[ -z "$newer" ] ||
+		warn "build is older than source changes" \
+		     "(e.g. ${newer#"$SRC_DIR"/}), rerun coverage-prep"
+}
+
+build_perf()
+{
+	if [ "$SKIP_BUILD" = 1 ]; then
+		check_coverage_build
+		check_build_freshness
+		return
+	fi
+
+	say "Building perf in $BUILD_DIR"
+	mkdir -p "$BUILD_DIR"
+	if [ "$ROOT" = 1 ] && [ "$BUILD_CREATED" = 0 ]; then
+		BUILD_STAMP=$BUILD_DIR/.coverage-stamp
+		: > "$BUILD_STAMP" 2>/dev/null ||
+			{ warn "could not write $BUILD_STAMP"; BUILD_STAMP=; }
+	fi
+	local debug=()
+	[ "$DEBUG_BUILD" = 1 ] && debug=(DEBUG=1)
+
+	if ! make -C "$PERF_DIR" O="$BUILD_DIR" CC=clang \
+		"${debug[@]+"${debug[@]}"}" \
+		EXTRA_CFLAGS="-fprofile-instr-generate -fcoverage-mapping -gdwarf-$DWARF_VERSION" \
+		-j"$JOBS" > "$BUILD_LOG" 2>&1; then
+		tail -20 "$BUILD_LOG" >&2
+		die "build failed, full log in $BUILD_LOG"
+	fi
+	tail -1 "$BUILD_LOG"
+	write_state
+}
+
+#
+# Run the selected tests with the instrumented perf in PATH: the shell
+# tests, the workloads and 'perf test' itself all come from there.
+#
+run_tests()
+{
+	if [ ${#TESTS[@]} -eq 0 ]; then
+		say "Running the complete perf test suite"
+	else
+		say "Running perf tests: ${TESTS[*]}"
+	fi
+	rm -rf "$COV_DIR/raw"
+	mkdir -p "$COV_DIR/raw"
+
+	set +e
+	# The shell tests only get discovered from the kernel tree root.
+	(cd "$SRC_DIR" &&
+		PATH="$BUILD_DIR:$PATH" \
+		LLVM_PROFILE_FILE="$COV_DIR/raw/perf-%p-%m.profraw" \
+			"$BUILD_DIR/perf" test -v \
+				"${TESTS[@]+"${TESTS[@]}"}") 2>&1 | tee "$TEST_LOG"
+	test_status=${PIPESTATUS[0]}
+	set -e
+
+	# 'perf test' exits 0 even when tests fail or time out, only the
+	# summary tells.
+	if [ "$test_status" = 0 ] &&
+	   grep -qE '^(Failed|Timed out) tests +: +[1-9]' "$TEST_LOG"; then
+		test_status=1
+	fi
+
+	grep -E '^(Passed|Skipped|Failed|Timed out) .*:' "$TEST_LOG" || true
+	[ "$test_status" = 0 ] ||
+		warn "some tests failed, coverage is still collected"
+	if [ "$test_status" != 0 ] && grep -q 'Access to performance monitoring' "$TEST_LOG"; then
+		warn "perf_event_paranoid=$(cat /proc/sys/kernel/perf_event_paranoid 2>/dev/null)" \
+		     "denied events to tests recording with callchains;" \
+		     "run as root or lower it for the full suite"
+	fi
+}
+
+#
+# Merge the per-process profiles and render the text report.
+#
+merge_profiles()
+{
+	local count size unusable=0 list=$COV_DIR/profiles.txt
+	# A full run leaves thousands of profiles: llvm-profdata reads the
+	# list from a file so they do not have to fit on the command line.
+	find "$COV_DIR/raw" -name '*.profraw' | sort > "$list"
+	count=$(wc -l < "$list")
+	size=$(du -sh "$COV_DIR/raw" 2>/dev/null | cut -f1)
+	[ "$count" -gt 0 ] ||
+		die "no .profraw files, was perf rebuilt with -fprofile-instr-generate?"
+
+	say "Merging $count profile files ($size)"
+	if ! "$LLVM_PROFDATA" merge -sparse --input-files="$list" \
+			-o "$PROFDATA" 2> "$COV_DIR/merge.log"; then
+		# A file left half written, by a perf killed at exit or by a full
+		# tmpfs, makes llvm-profdata drop the whole merge and with it the
+		# run's measurement: retry keeping what can be read and say how
+		# much was lost.  --failure-mode=warn exists since LLVM 14, the
+		# oldest llvm-profdata the test images ship.
+		warn "some profile files are unusable, merging the rest"
+		"$LLVM_PROFDATA" merge -sparse --failure-mode=warn \
+			--input-files="$list" -o "$PROFDATA" \
+			2> "$COV_DIR/merge.log" ||
+			die "llvm-profdata merge failed, see $COV_DIR/merge.log"
+		# Count only warnings naming a profile: the merge also warns
+		# about counter and hash mismatches.
+		unusable=$(sed -n 's/^warning: \(.*\.profraw\):.*/\1/p' \
+			"$COV_DIR/merge.log" | sort -u | wc -l)
+		[ "$unusable" -lt "$count" ] ||
+			die "no usable profile among $count, see $COV_DIR/merge.log"
+		warn "merged $((count - unusable)) profile files, ignored $unusable unusable"
+	fi
+}
+
+llvm_cov_objects()
+{
+	echo "$BUILD_DIR/perf"
+	local so
+	for so in perf.so libperf.so libperf-jvmti.so; do
+		[ -f "$BUILD_DIR/$so" ] && echo "--object=$BUILD_DIR/$so"
+	done
+	# The Python extension is named after the interpreter ABI and lives
+	# in its own directory.
+	for so in "$BUILD_DIR"/python/perf*.so; do
+		[ -f "$so" ] && echo "--object=$so"
+	done
+}
+
+render_report()
+{
+	local objects
+	mapfile -t objects < <(llvm_cov_objects)
+
+	say "Generating report"
+	"$LLVM_COV" report "${objects[@]}" --instr-profile="$PROFDATA" > "$REPORT"
+}
+
+#
+# The report parsers share these: llvm-cov strips the prefix every
+# reported file has in common, so a tools/perf source can read as
+# perf/util/evsel.c; perf_relpath() gives the path -f takes, generated()
+# spots a build directory row.
+AWK_PERF='
+function perf_relpath(p) {
+	sub(/^.*tools\/perf\//, "", p)
+	sub(/^perf\//, "", p)
+	return p
+}
+function generated(p) {
+	return build != "" && index(perf_relpath(p), build "/") == 1
+}
+'
+
+# Line coverage of a full report for one file: "lines missed cover fn%".
+# Match the requested path as a suffix: a build outside the source tree
+# gives ".../tools/perf/...", one inside it "tools/perf/...", and one
+# inside tools/ makes llvm-cov strip the "<srctree>/tools/" prefix shared
+# by every reported file, giving "perf/...".
+#
+# -f takes the path as it shows in the report, or a tools/perf/ relative one.
+focus_path()
+{
+	case "$1" in
+	*tools/perf/*) printf '%s\n' "${1#*tools/perf/}" ;;
+	*) printf '%s\n' "$1" ;;
+	esac
+}
+
+file_cov()
+{
+	awk -v f="$2" "$AWK_PERF"'
+		{
+			g = perf_relpath(f)
+			rel = perf_relpath($1)
+			if (rel == f || rel == g || $1 == f) {
+				print $8, $9, $10, $7
+				exit
+			}
+		}' "$1"
+}
+
+total_cov()
+{
+	awk '$1 == "TOTAL" { print $8, $9, $10 }' "$1"
+}
+
+total_cov_perf()
+{
+	# Generated files under an in-tree build directory read as
+	# perf/<build>/...; leave them out so an in and an out of tree
+	# build count the same files.
+	awk -v build="$BUILD_REL" "$AWK_PERF"'
+		generated($1) { next }
+		$1 != "TOTAL" &&
+		($1 ~ /(^|\/)tools\/perf\// || $1 ~ /^perf\//) {
+			lines += $8
+			missed += $9
+		}
+		END {
+			if (lines)
+				printf "%d %d %.2f%%\n", lines, missed,
+					100 * (lines - missed) / lines
+		}' "$1"
+}
+
+# Delta between the totals the $3 helper (total_cov or total_cov_perf)
+# prints for $prev and $cur.
+total_delta()
+{
+	local prev=$1 cur=$2 total=$3 old cur_cov
+	[ -f "$prev" ] || return 0
+	old=$("$total" "$prev" | awk '{print $3}')
+	cur_cov=$("$total" "$cur" | awk '{print $3}')
+	[ -n "$old" ] && [ -n "$cur_cov" ] || return 0
+	awk -v cur="$cur_cov" -v old="$old" 'BEGIN {
+		sub(/%$/, "", cur); sub(/%$/, "", old)
+		printf "%+.2f%%", cur - old }'
+}
+
+#
+# "  (previous X, +Y)": the same total in $BASELINE and its delta, when
+# there is a baseline from an earlier run.
+#
+since_baseline()
+{
+	local prev delta
+	[ "$USE_BASELINE" = 1 ] && [ -f "$BASELINE" ] &&
+		! cmp -s "$BASELINE" "$REPORT" || return 0
+	prev=$("$1" "$BASELINE" | awk '{print $3}')
+	delta=$(total_delta "$BASELINE" "$REPORT" "$1")
+	[ -n "$prev" ] && [ -n "$delta" ] || return 0
+	printf "  (previous %s, %s)" "$prev" "$delta"
+}
+
+report_delta()
+{
+	local prev=$1 cur=$2 label
+	local cur_cov old_cov delta
+	label=$(focus_path "$3")
+	cur_cov=$(file_cov "$cur" "$label" | awk '{print $3}')
+	[ -n "$cur_cov" ] || return 0
+
+	if [ -f "$prev" ]; then
+		old_cov=$(file_cov "$prev" "$label" | awk '{print $3}')
+		if [ -n "$old_cov" ]; then
+			delta=$(awk -v cur="$cur_cov" -v old="$old_cov" 'BEGIN {
+				sub(/%$/, "", cur); sub(/%$/, "", old)
+				printf "%+.2f%%", cur - old }')
+		else
+			delta="(new)"
+		fi
+	else
+		old_cov="-"
+		delta="-"
+	fi
+	printf "  %-36s %8s  %8s  %9s\n" "$label" "${old_cov:--}" "$cur_cov" "$delta"
+}
+
+#
+# With no -f, show where the uncovered lines are: the files with the most
+# missed lines are where new tests should try to get more coverage.
+#
+print_worst_files()
+{
+	[ "$TOP" -gt 0 ] || return 0
+	local rows missed lines cover fn path
+	rows=$(awk -v min="$MIN_LINES" -v build="$BUILD_REL" "$AWK_PERF"'
+		($1 ~ /(^|\/)tools\/perf\// || $1 ~ /^perf\//) &&
+		!generated($1) && $8 >= min && $9 > 0 {
+			printf "%s %s %s %s %s\n", $9, $8, $10, $7,
+				perf_relpath($1)
+		}' "$REPORT" | sort -k1,1nr -k2,2nr | sed -n "1,${TOP}p")
+	[ -n "$rows" ] || return 0
+
+	printf "  largest uncovered files (>= %s lines)\n" "$MIN_LINES"
+	printf "  %-44s %8s  %8s  %8s  %8s\n" \
+		"file" "lines" "cover" "missed" "fn-cover"
+	while read -r missed lines cover fn path; do
+		printf "  %-44s %8s  %8s  %8s  %8s\n" \
+			"$path" "$lines" "$cover" "$missed" "$fn"
+	done <<< "$rows"
+}
+
+print_summary()
+{
+	local lines missed cover p_lines p_missed p_cover file cov
+	read -r lines missed cover < <(total_cov "$REPORT")
+	printf "\n\033[1mTotal:\033[0m %s of %s lines covered (%s)" \
+		"$((lines - missed))" "$lines" "$cover"
+	since_baseline total_cov
+	printf "\n"
+	read -r p_lines p_missed p_cover < <(total_cov_perf "$REPORT") || true
+	if [ -n "$p_lines" ]; then
+		printf "  perf: %s of %s lines covered (%s)" \
+			"$((p_lines - p_missed))" "$p_lines" "$p_cover"
+		since_baseline total_cov_perf
+		printf "\n"
+	fi
+	printf "\n"
+
+	if [ ${#FOCUS[@]} -eq 0 ]; then
+		print_worst_files
+		return
+	fi
+
+	printf "  \033[1m%-36s\033[0m %8s  %6s  %6s  %8s\n" \
+		"file" "lines" "cover" "missed" "fn-cover"
+	for file in "${FOCUS[@]}"; do
+		file=$(focus_path "$file")
+		cov=$(file_cov "$REPORT" "$file")
+		if [ -z "$cov" ]; then
+			printf "  %-36s %8s\n" "$file" "not covered"
+			continue
+		fi
+		printf "  %-36s %8s  %6s  %6s  %8s\n" "$file" \
+			"$(echo "$cov" | awk '{print $1}')" \
+			"$(echo "$cov" | awk '{print $3}')" \
+			"$(echo "$cov" | awk '{print $2}')" \
+			"$(echo "$cov" | awk '{print $4}')"
+	done
+
+	if [ "$USE_BASELINE" = 1 ] && [ -f "$BASELINE" ] &&
+	   ! cmp -s "$BASELINE" "$REPORT"; then
+		printf "\n  per file delta since %s\n" "$BASELINE"
+		printf "  %-36s %8s  %8s  %9s\n" "file" "previous" "current" "delta"
+		for file in "${FOCUS[@]}"; do
+			report_delta "$BASELINE" "$REPORT" "$file"
+		done
+	fi
+}
+
+#
+# --table: render the report of the last run as an ASCII table, like
+# pahole's coverage_table.py.  Without -f the rows are the TOP files with
+# the most uncovered lines, sorted by line coverage; --top 0 lists every
+# file with at least MIN_LINES lines and uncovered lines.  The total is
+# the whole report, which also counts the libraries perf links with.
+#
+bar()
+{
+	local pct=$1 width=$2 filled i out=
+	filled=$(awk -v p="$pct" -v w="$width" 'BEGIN { printf "%d", p * w / 100 }')
+	for ((i = 0; i < filled; i++)); do out+=█; done
+	for ((i = filled; i < width; i++)); do out+=░; done
+	printf '%s' "$out"
+}
+
+center()
+{
+	local left=$(( ($2 - ${#1}) / 2 ))
+	printf '%*s%s%*s' "$left" '' "$1" "$(( $2 - ${#1} - left ))" ''
+}
+
+dashes()
+{
+	local s
+	printf -v s '%*s' "$1" ''
+	printf '%s' "${s// /─}"
+}
+
+table_row()
+{
+	awk -v f="$2" "$AWK_PERF"'
+		{
+			g = perf_relpath(f)
+			path = perf_relpath($1)
+			if (path == f || path == g || $1 == f) {
+				printf "%s\t%s\t%d\t%d\t%.2f\t%s\t%d\t%s\n",
+				       path, $8, $8 - $9, $9, $10, $5, $5 - $6, $7
+				exit
+			}
+		}' "$1"
+}
+
+table_rows()
+{
+	if [ ${#FOCUS[@]} -gt 0 ]; then
+		local file
+		for file in "${FOCUS[@]}"; do
+			table_row "$REPORT" "$file"
+		done | sort -t$'\t' -k5,5gr
+		return
+	fi
+
+	awk -v min="$MIN_LINES" -v build="$BUILD_REL" "$AWK_PERF"'
+		($1 ~ /(^|\/)tools\/perf\// || $1 ~ /^perf\//) &&
+		!generated($1) && $8 >= min && $9 > 0 {
+			printf "%s\t%s\t%d\t%d\t%.2f\t%s\t%d\t%s\n",
+			       perf_relpath($1), $8, $8 - $9, $9, $10,
+			       $5, $5 - $6, $7
+		}' "$REPORT" |
+		sort -t$'\t' -k4,4nr |
+		if [ "$TOP" -gt 0 ]; then sed -n "1,${TOP}p"; else cat; fi |
+		sort -t$'\t' -k5,5gr
+}
+
+print_table()
+{
+	local rows total path lines hit missed pct funcs funcs_hit func_cov
+	local row_fmt w d_file d29 d13 d10 d8
+
+	rows=$(table_rows)
+	[ -n "$rows" ] ||
+		die "no coverage data in $REPORT for the requested files"
+	total=$(awk '$1 == "TOTAL" {
+		printf "%s\t%d\t%d\t%.2f\t%s\t%d\t%s\n",
+		       $8, $8 - $9, $9, $10, $5, $5 - $6, $7
+	}' "$REPORT")
+
+	w=5
+	while IFS=$'\t' read -r path _; do
+		if [ ${#path} -gt "$w" ]; then
+			w=${#path}
+		fi
+	done <<< "$rows"
+
+	d8=$(dashes 8)
+	d10=$(dashes 10)
+	d13=$(dashes 13)
+	d29=$(dashes 29)
+	d_file=$(dashes $((w + 2)))
+
+	printf '┌%s┬%s┬%s┬%s┬%s┬%s┬%s┐\n' \
+		"$d_file" "$d8" "$d8" "$d8" "$d29" "$d13" "$d10"
+	printf '│ %-*s │ %6s │ %6s │ %6s │ %s │ %11s │ %8s │\n' \
+		"$w" "File" "Lines" "Hit" "Miss" \
+		"$(center 'Line Coverage' 27)" "Funcs" "FuncCov"
+	printf '├%s┼%s┼%s┼%s┼%s┼%s┼%s┤\n' \
+		"$d_file" "$d8" "$d8" "$d8" "$d29" "$d13" "$d10"
+
+	row_fmt=$(printf '│ %%-%ds │ %%6s │ %%6s │ %%6s │ %%s %%5.1f%%%%' "$w")
+	row_fmt+=' │ %5s/%-5s │ %8s │\n'
+
+	while IFS=$'\t' read -r path lines hit missed pct funcs funcs_hit func_cov; do
+		printf "$row_fmt" "$path" "$lines" "$hit" "$missed" \
+			"$(bar "$pct" 20)" "$pct" "$funcs_hit" "$funcs" "$func_cov"
+	done <<< "$rows"
+
+	printf '├%s┼%s┼%s┼%s┼%s┼%s┼%s┤\n' \
+		"$d_file" "$d8" "$d8" "$d8" "$d29" "$d13" "$d10"
+	while IFS=$'\t' read -r lines hit missed pct funcs funcs_hit func_cov; do
+		printf "$row_fmt" "TOTAL" "$lines" "$hit" "$missed" \
+			"$(bar "$pct" 20)" "$pct" "$funcs_hit" "$funcs" "$func_cov"
+	done <<< "$total"
+	printf '└%s┴%s┴%s┴%s┴%s┴%s┴%s┘\n' \
+		"$d_file" "$d8" "$d8" "$d8" "$d29" "$d13" "$d10"
+}
+
+print_uncovered()
+{
+	[ "$UNCOVERED" -gt 0 ] || return 0
+	[ ${#FOCUS[@]} -gt 0 ] || return 0
+	local objects file out lines header=0
+	mapfile -t objects < <(llvm_cov_objects)
+
+	for file in "${FOCUS[@]}"; do
+		file=$(focus_path "$file")
+		# No report row means the file was not built: print_summary()
+		# already said so, llvm-cov show would dump the whole profile.
+		[ -n "$(file_cov "$REPORT" "$file")" ] || continue
+		out=$("$LLVM_COV" show "${objects[@]}" --instr-profile="$PROFDATA" \
+			"$PERF_DIR/$file" 2>/dev/null |
+			awk -F'|' '$2 ~ /^[[:space:]]*0[[:space:]]*$/ {
+				gsub(/[[:space:]]/, "", $1); printf "%s ", $1 }')
+		lines=$(echo "$out" | wc -w)
+		[ "$lines" -gt 0 ] || continue
+		if [ "$header" = 0 ]; then
+			printf "\n  uncovered lines (first %s per file)\n" "$UNCOVERED"
+			header=1
+		fi
+		printf "  %-24s %4s lines: %s\n" "$file" "$lines" \
+			"$(echo "$out" | cut -d' ' -f1-"$UNCOVERED")"
+	done
+}
+
+save_html()
+{
+	[ "$HTML" = 1 ] || return 0
+	local objects
+	mapfile -t objects < <(llvm_cov_objects)
+	say "Writing HTML report to $COV_DIR/html"
+	"$LLVM_COV" show "${objects[@]}" --instr-profile="$PROFDATA" \
+		--format=html --output-dir="$COV_DIR/html" \
+		--show-line-counts-or-regions --show-branches=count
+}
+
+check_stale()
+{
+	[ "$REPORT_ONLY" = 1 ] || return 0
+	if [ ! -f "$PROFDATA" ]; then
+		[ "$TABLE" = 1 ] && return 0
+		die "no $PROFDATA, run without --report-only first"
+	fi
+	local newer
+	newer=$(newer_sources "$PROFDATA")
+	if [ -n "$newer" ]; then
+		warn "profiles are older than source changes" \
+		     "(e.g. ${newer#"$SRC_DIR"/}), results may be stale"
+	fi
+}
+
+update_baseline()
+{
+	[ "$USE_BASELINE" = 1 ] || return 0
+	[ "$REPORT_ONLY" = 1 ] && return 0
+	# A --baseline file is only read, the default one rolls forward.
+	[ "$BASELINE_SET" = 0 ] || return 0
+	# A -t run covers a subset, saving it would poison the next full run.
+	if [ ${#TESTS[@]} -gt 0 ]; then
+		printf "\nBaseline not updated, this was a subset run\n"
+		return 0
+	fi
+	[ -f "$BASELINE" ] && mv "$BASELINE" "$BASELINE.prev"
+	cp "$REPORT" "$BASELINE"
+	printf "\nBaseline saved: %s\n" "$BASELINE"
+}
+
+test_status=0
+
+if [ "$TABLE" = 1 ]; then
+	[ -f "$REPORT" ] || die "no $REPORT, run coverage first"
+	# The table code parses llvm-cov's decimal points; keep the numeric
+	# locale fixed here only, the tests must run with their normal one.
+	export LC_ALL=C
+	check_stale
+	print_table
+	exit 0
+fi
+
+if [ "$ROOT" = 1 ]; then
+	trap fix_ownership EXIT
+fi
+
+if [ "$PREP" = 1 ]; then
+	build_perf
+	# build_perf() records the build unless it only checked it.
+	if [ "$SKIP_BUILD" = 1 ]; then
+		write_state
+	fi
+	say "Coverage build ready: $BUILD_DIR/perf"
+	printf "As root: %s/scripts/coverage.sh\n" "$PERF_DIR"
+	exit 0
+fi
+
+if [ "$REPORT_ONLY" = 0 ]; then
+	build_perf
+	run_tests
+	merge_profiles
+else
+	check_coverage_build
+	check_stale
+fi
+
+[ -f "$PROFDATA" ] || die "no $PROFDATA, run without --report-only first"
+
+export LC_ALL=C
+render_report
+print_summary
+print_uncovered
+save_html
+update_baseline
+
+printf "\nReport:  %s\n" "$REPORT"
+[ "$HTML" = 1 ] && printf "HTML:    %s\n" "$COV_DIR/html/index.html"
+
+exit "$test_status"
-- 
2.56.0


  parent reply	other threads:[~2026-11-17 20:04 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 20:04 [PATCH v6 0/13] perf coverage: A harness for perf, and the fixes it found Arnaldo Carvalho de Melo
2026-11-17 20:04 ` [PATCH v6 01/13] perf jvmti: Link the agent with EXTRA_CFLAGS Arnaldo Carvalho de Melo
2026-11-17 20:10   ` sashiko-bot
2026-11-17 20:04 ` Arnaldo Carvalho de Melo [this message]
2026-11-17 20:04 ` [PATCH v6 03/13] perf annotate: Handle absolute addressing in data type profiling Arnaldo Carvalho de Melo
2026-11-17 20:04 ` [PATCH v6 04/13] perf tests: Exercise DW_OP_addrx global variables Arnaldo Carvalho de Melo
2026-11-17 20:13   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 05/13] perf tests: Exercise the flexible array member path Arnaldo Carvalho de Melo
2026-11-17 20:11   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 06/13] perf annotate-data: Count flexible array accesses for the whole struct Arnaldo Carvalho de Melo
2026-11-17 20:10   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 07/13] perf tests: Exercise data type resolution from a register Arnaldo Carvalho de Melo
2026-11-17 20:04 ` [PATCH v6 08/13] perf annotate: Print the stats after the annotations Arnaldo Carvalho de Melo
2026-11-17 20:11   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 09/13] perf tests: Silence the libbfd probe in build-test Arnaldo Carvalho de Melo
2026-11-17 20:08   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 10/13] perf build: Record the display-only features in FEATURE-DUMP Arnaldo Carvalho de Melo
2026-11-17 20:04 ` [PATCH v6 11/13] perf tests: Fix the Intel PT virtual LBR check Arnaldo Carvalho de Melo
2026-11-17 20:04 ` [PATCH v6 12/13] perf test: Drop samples without an IP in the dlfilter test Arnaldo Carvalho de Melo
2026-11-17 20:12   ` sashiko-bot
2026-11-17 20:04 ` [PATCH v6 13/13] perf test: Skip the LBR inline unwinding check when unsupported Arnaldo Carvalho de Melo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117200433.45174-3-acme@kernel.org \
    --to=acme@kernel.org \
    --cc=acme@redhat.com \
    --cc=adrian.hunter@intel.com \
    --cc=irogers@google.com \
    --cc=james.clark@linaro.org \
    --cc=jolsa@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-perf-users@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=namhyung@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=williams@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox