Re: [PATCH v2] perf stat: Introduce skippable evsels

["Liang, Kan" <kan.liang@linux.intel.com>]

On 2023-04-18 11:43 a.m., Ian Rogers wrote:
> On Tue, Apr 18, 2023 at 6:03 AM Liang, Kan <kan.liang@linux.intel.com> wrote:
>>
>>
>>
>> On 2023-04-17 2:13 p.m., Ian Rogers wrote:
>>> The json TopdownL1 is enabled if present unconditionally for perf stat
>>> default. Enabling it on Skylake has multiplexing as TopdownL1 on
>>> Skylake has multiplexing unrelated to this change - at least on the
>>> machine I was testing on. We can remove the metric group TopdownL1 on
>>> Skylake so that we don't enable it by default, there is still the
>>> group TmaL1. To me, disabling TopdownL1 seems less desirable than
>>> running with multiplexing - previously to get into topdown analysis
>>> there has to be knowledge that "perf stat -M TopdownL1" is the way to
>>> do this.
>>
>> To be honest, I don't think it's a good idea to remove the TopdownL1. We
>> cannot remove it just because the new way cannot handle it. The perf
>> stat default works well until 6.3-rc7. It's a regression issue of the
>> current perf-tools-next.
> 
> I'm not so clear it is a regression to consistently add TopdownL1 for
> all architectures supporting it. 


Breaking the perf stat default is a regression.

The reason we once added the TopdownL1 for ICL and later platform is
that it doesn't break the original design (a *clean* output).

> The assertion is that because
> TopdownL1 has multiplexing and multiplexing is global then we've
> lowered the accuracy of other metrics, but the only other hardware
> metrics in the default output pre-Icelake are IPC and branch miss
> rate. Having TopdownL1 is a way of drilling into performance issues,
> while IPC and branch miss rate are putting your finger in the air to
> see which way the wind is blowing. Perhaps we should drop these if
> TopdownL1 is present.
> 
>> But I'm OK to add some flags with the metrics to assist the perf tool to
>> specially handle the case if you prefer to modify the event list.
> 
> We've already removed thresholds from the default output, we could
> remove groups.
> 
>>>
>>> This doesn't relate to this change which is about making it so that
>>> failing to set up TopdownL1 doesn't cause an early exit. The reason I
>>> showed TigerLake output was that on TigerLake the skip/fallback
>>> approach works while Skylake just needs the events disabled/skipped
>>> unless it has sufficient permissions. Note the :u on the events in:
>>
>> The perf_event_open() should be good to detect the insufficient
>> permission, but it doesn't work to detect an existing of an event.
>> That's because the kernel only checks the features not specific events.
>> It's not a reliable way to rely on the output of the perf_event_open() here.
> 
> I'm unclear why not as not having perf_event_open fail seems like a
> kernel bug. I can see there is little motivation to fix this on older
> architectures like Skylake.

Updating kernel may not be an option here. Because
- There is no issue with the existing perf tool until 6.3-rc7. It
doesn't sound like a defect of the kernel.
- The kernel for the SKL has been there for many years. It's impossible
to change all the kernels to support a new requirement from the perf tool.

> We do attempt to workaround it with the
> errata flags on the metrics introduced here:
> https://github.com/intel/perfmon/blob/main/scripts/create_perf_json.py#L1296
>
If so, I would still suggest to check the slots and topdown events in
sysfs and decide whether to append the TopdownL1 to perf stat default.

So we probably need a ARCH specific is_event_available(), before
appending the events.


>>>> From your test result in the v2 description, we can see that there is no
>>>> TopdownL1, which is good and expected. However, there is a (48.99%) with
>>>> cycles:u event, which implies multiplexing. Could you please check
>>>> what's the problem here?
>>>> Also, if it's because of the backgroud, all the events should be
>>>> multiplexing. But it looks like only cycle:u has multiplexing. Other
>>>> events, instructions:u, branches:u and branch-misses:u work without
>>>> multiplexing. That's very strange.
>>> I wasn't able to reproduce it and suspect it was a transient thing. I
>>> think there are multiplexing things to look into, 2 events on a fixed
>>> counter on Icelake+ will trigger multiplexing on all counters, and
>>> Skylake's 3 fixed and 4 generic should fit TopdownL1.
>>
>> Just found a cascade lake. With this patch + the current
>> perf-tools-next, partial of the TopdownL1 and multiplexing can still be
>> observed.
>>
>> $ sudo ./perf stat true
>>
>>  Performance counter stats for 'true':
>>
>>               2.91 msec task-clock                       #    0.316 CPUs
>> utilized
>>                  0      context-switches                 #    0.000 /sec
>>                  0      cpu-migrations                   #    0.000 /sec
>>                 45      page-faults                      #   15.474 K/sec
>>          2,819,972      cycles                           #    0.970 GHz
>>                        (60.14%)
>>          5,391,406      instructions                     #    1.91  insn
>> per cycle
>>          1,068,575      branches                         #  367.442 M/sec
>>              8,455      branch-misses                    #    0.79% of
>> all branches
>>             70,283      CPU_CLK_UNHALTED.REF_XCLK        #   24.168
>> M/sec
>>             48,806      INT_MISC.RECOVERY_CYCLES_ANY     #   16.783
>> M/sec                       (39.86%)
>>
>>        0.009204517 seconds time elapsed
>>
>>        0.000000000 seconds user
>>        0.009614000 seconds sys
> 
> The issue here is that 'true' ran very quickly and so we skipped the
> output of the events with 0 counts, no metrics were computed due to
> the zero counts. Cascade lake has the same TopdownL1 multiplexing
> issues as Skylake.
> 

I tried other benchmark. I can still observe the multiplexing. But my
remote machine just crashed. I'm asking the tech support. So I cannot do
more tests.

Thanks,
Kan