* [PATCH -next v2 0/2] perf stat: Support inherit events for bperf
@ 2024-09-05 11:59 Tengda Wu
2024-09-05 11:59 ` [PATCH -next v2 1/2] perf stat: Support inherit events during fork() " Tengda Wu
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Tengda Wu @ 2024-09-05 11:59 UTC (permalink / raw)
To: Peter Zijlstra
Cc: song, Ingo Molnar, Arnaldo Carvalho de Melo, Namhyung Kim,
Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers,
Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf
Hi,
bperf (perf-stat --bpf-counter) has not supported inherit events
during fork() since it was first introduced.
This patch series tries to add this support by:
1) adding two new bpf programs to monitor task lifecycle;
2) recording new tasks in the filter map dynamically;
3) reusing `accum_key` of parent task for new tasks.
Thanks,
Tengda
Changelog:
---------
v2: (Address comments from Namhyung)
* Remove the unused init_filter_entries in follower bpf, declare
a global filter_entry_count in bpf_counter instead
* Attach on_newtask and on_exittask progs only if the filter type
is either PID or TGID
v1: https://lore.kernel.org/all/20240904123103.732507-1-wutengda@huaweicloud.com/
Tengda Wu (2):
perf stat: Support inherit events during fork() for bperf
perf test: Use sqrtloop workload to test bperf event
tools/perf/tests/shell/stat_bpf_counters.sh | 2 +-
tools/perf/util/bpf_counter.c | 32 +++++++--
tools/perf/util/bpf_skel/bperf_follower.bpf.c | 70 +++++++++++++++++--
tools/perf/util/bpf_skel/bperf_u.h | 5 ++
4 files changed, 95 insertions(+), 14 deletions(-)
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH -next v2 1/2] perf stat: Support inherit events during fork() for bperf 2024-09-05 11:59 [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu @ 2024-09-05 11:59 ` Tengda Wu 2024-09-14 18:02 ` Namhyung Kim 2024-09-05 11:59 ` [PATCH -next v2 2/2] perf test: Use sqrtloop workload to test bperf event Tengda Wu 2024-09-14 6:58 ` [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu 2 siblings, 1 reply; 6+ messages in thread From: Tengda Wu @ 2024-09-05 11:59 UTC (permalink / raw) To: Peter Zijlstra Cc: song, Ingo Molnar, Arnaldo Carvalho de Melo, Namhyung Kim, Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers, Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf bperf has a nice ability to share PMUs, but it still does not support inherit events during fork(), resulting in some deviations in its stat results compared with perf. perf stat result: $ ./perf stat -e cycles,instructions -- ./perf test -w sqrtloop Performance counter stats for './perf test -w sqrtloop': 2,316,038,116 cycles 2,859,350,725 instructions # 1.23 insn per cycle 1.009603637 seconds time elapsed 1.004196000 seconds user 0.003950000 seconds sys bperf stat result: $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop Performance counter stats for './perf test -w sqrtloop': 18,762,093 cycles 23,487,766 instructions # 1.25 insn per cycle 1.008913769 seconds time elapsed 1.003248000 seconds user 0.004069000 seconds sys In order to support event inheritance, two new bpf programs are added to monitor the fork and exit of tasks respectively. When a task is created, add it to the filter map to enable counting, and reuse the `accum_key` of its parent task to count together with the parent task. When a task exits, remove it from the filter map to disable counting. After support: $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop Performance counter stats for './perf test -w sqrtloop': 2,316,543,537 cycles 2,859,677,779 instructions # 1.23 insn per cycle 1.009566332 seconds time elapsed 1.004414000 seconds user 0.003545000 seconds sys Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> --- tools/perf/util/bpf_counter.c | 32 +++++++-- tools/perf/util/bpf_skel/bperf_follower.bpf.c | 70 +++++++++++++++++-- tools/perf/util/bpf_skel/bperf_u.h | 5 ++ 3 files changed, 94 insertions(+), 13 deletions(-) diff --git a/tools/perf/util/bpf_counter.c b/tools/perf/util/bpf_counter.c index 7a8af60e0f51..94aa46f50052 100644 --- a/tools/perf/util/bpf_counter.c +++ b/tools/perf/util/bpf_counter.c @@ -394,6 +394,7 @@ static int bperf_check_target(struct evsel *evsel, } static struct perf_cpu_map *all_cpu_map; +static __u32 filter_entry_cnt; static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, struct perf_event_attr_map_entry *entry) @@ -444,12 +445,31 @@ static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, return err; } +/* Attach programs on demand according to filter types to reduce overhead */ +static int bperf_attach_follower_program(struct bperf_follower_bpf *skel, + enum bperf_filter_type filter_type) +{ + struct bpf_link *link; + int err = 0; + + if (filter_type == BPERF_FILTER_PID || + filter_type == BPERF_FILTER_TGID) + err = bperf_follower_bpf__attach(skel); + else { + link = bpf_program__attach(skel->progs.fexit_XXX); + if (IS_ERR(link)) + err = PTR_ERR(link); + } + + return err; +} + static int bperf__load(struct evsel *evsel, struct target *target) { struct perf_event_attr_map_entry entry = {0xffffffff, 0xffffffff}; int attr_map_fd, diff_map_fd = -1, err; enum bperf_filter_type filter_type; - __u32 filter_entry_cnt, i; + __u32 i; if (bperf_check_target(evsel, target, &filter_type, &filter_entry_cnt)) return -1; @@ -529,9 +549,6 @@ static int bperf__load(struct evsel *evsel, struct target *target) /* set up reading map */ bpf_map__set_max_entries(evsel->follower_skel->maps.accum_readings, filter_entry_cnt); - /* set up follower filter based on target */ - bpf_map__set_max_entries(evsel->follower_skel->maps.filter, - filter_entry_cnt); err = bperf_follower_bpf__load(evsel->follower_skel); if (err) { pr_err("Failed to load follower skeleton\n"); @@ -543,6 +560,7 @@ static int bperf__load(struct evsel *evsel, struct target *target) for (i = 0; i < filter_entry_cnt; i++) { int filter_map_fd; __u32 key; + struct bperf_filter_value fval = { i, 0 }; if (filter_type == BPERF_FILTER_PID || filter_type == BPERF_FILTER_TGID) @@ -553,12 +571,12 @@ static int bperf__load(struct evsel *evsel, struct target *target) break; filter_map_fd = bpf_map__fd(evsel->follower_skel->maps.filter); - bpf_map_update_elem(filter_map_fd, &key, &i, BPF_ANY); + bpf_map_update_elem(filter_map_fd, &key, &fval, BPF_ANY); } evsel->follower_skel->bss->type = filter_type; - err = bperf_follower_bpf__attach(evsel->follower_skel); + err = bperf_attach_follower_program(evsel->follower_skel, filter_type); out: if (err && evsel->bperf_leader_link_fd >= 0) @@ -623,7 +641,7 @@ static int bperf__read(struct evsel *evsel) bperf_sync_counters(evsel); reading_map_fd = bpf_map__fd(skel->maps.accum_readings); - for (i = 0; i < bpf_map__max_entries(skel->maps.accum_readings); i++) { + for (i = 0; i < filter_entry_cnt; i++) { struct perf_cpu entry; __u32 cpu; diff --git a/tools/perf/util/bpf_skel/bperf_follower.bpf.c b/tools/perf/util/bpf_skel/bperf_follower.bpf.c index f193998530d4..32b944f28776 100644 --- a/tools/perf/util/bpf_skel/bperf_follower.bpf.c +++ b/tools/perf/util/bpf_skel/bperf_follower.bpf.c @@ -5,6 +5,8 @@ #include <bpf/bpf_tracing.h> #include "bperf_u.h" +#define MAX_ENTRIES 102400 + struct { __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); __uint(key_size, sizeof(__u32)); @@ -22,7 +24,9 @@ struct { struct { __uint(type, BPF_MAP_TYPE_HASH); __uint(key_size, sizeof(__u32)); - __uint(value_size, sizeof(__u32)); + __uint(value_size, sizeof(struct bperf_filter_value)); + __uint(max_entries, MAX_ENTRIES); + __uint(map_flags, BPF_F_NO_PREALLOC); } filter SEC(".maps"); enum bperf_filter_type type = 0; @@ -33,14 +37,15 @@ int BPF_PROG(fexit_XXX) { struct bpf_perf_event_value *diff_val, *accum_val; __u32 filter_key, zero = 0; - __u32 *accum_key; + __u32 accum_key; + struct bperf_filter_value *fval; if (!enabled) return 0; switch (type) { case BPERF_FILTER_GLOBAL: - accum_key = &zero; + accum_key = zero; goto do_add; case BPERF_FILTER_CPU: filter_key = bpf_get_smp_processor_id(); @@ -55,16 +60,20 @@ int BPF_PROG(fexit_XXX) return 0; } - accum_key = bpf_map_lookup_elem(&filter, &filter_key); - if (!accum_key) + fval = bpf_map_lookup_elem(&filter, &filter_key); + if (!fval) return 0; + accum_key = fval->accum_key; + if (fval->exited) + bpf_map_delete_elem(&filter, &filter_key); + do_add: diff_val = bpf_map_lookup_elem(&diff_readings, &zero); if (!diff_val) return 0; - accum_val = bpf_map_lookup_elem(&accum_readings, accum_key); + accum_val = bpf_map_lookup_elem(&accum_readings, &accum_key); if (!accum_val) return 0; @@ -75,4 +84,53 @@ int BPF_PROG(fexit_XXX) return 0; } +/* The program is only used for PID or TGID filter types. */ +SEC("tp_btf/task_newtask") +int BPF_PROG(on_newtask, struct task_struct *task, __u64 clone_flags) +{ + __u32 parent_pid, child_pid; + struct bperf_filter_value *parent_fval; + struct bperf_filter_value child_fval = { 0 }; + + if (!enabled) + return 0; + + parent_pid = bpf_get_current_pid_tgid() >> 32; + child_pid = task->pid; + + /* Check if the current task is one of the target tasks to be counted */ + parent_fval = bpf_map_lookup_elem(&filter, &parent_pid); + if (!parent_fval) + return 0; + + /* Start counting for the new task by adding it into filter map, + * inherit the accum key of its parent task so that they can be + * counted together. + */ + child_fval.accum_key = parent_fval->accum_key; + child_fval.exited = 0; + bpf_map_update_elem(&filter, &child_pid, &child_fval, BPF_NOEXIST); + + return 0; +} + +/* The program is only used for PID or TGID filter types. */ +SEC("tp_btf/sched_process_exit") +int BPF_PROG(on_exittask, struct task_struct *task) +{ + __u32 pid; + struct bperf_filter_value *fval; + + if (!enabled) + return 0; + + /* Stop counting for this task by removing it from filter map */ + pid = task->pid; + fval = bpf_map_lookup_elem(&filter, &pid); + if (fval) + fval->exited = 1; + + return 0; +} + char LICENSE[] SEC("license") = "Dual BSD/GPL"; diff --git a/tools/perf/util/bpf_skel/bperf_u.h b/tools/perf/util/bpf_skel/bperf_u.h index 1ce0c2c905c1..4a4a753980be 100644 --- a/tools/perf/util/bpf_skel/bperf_u.h +++ b/tools/perf/util/bpf_skel/bperf_u.h @@ -11,4 +11,9 @@ enum bperf_filter_type { BPERF_FILTER_TGID, }; +struct bperf_filter_value { + __u32 accum_key; + __u8 exited; +}; + #endif /* __BPERF_STAT_U_H */ -- 2.34.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH -next v2 1/2] perf stat: Support inherit events during fork() for bperf 2024-09-05 11:59 ` [PATCH -next v2 1/2] perf stat: Support inherit events during fork() " Tengda Wu @ 2024-09-14 18:02 ` Namhyung Kim 2024-09-15 11:22 ` Tengda Wu 0 siblings, 1 reply; 6+ messages in thread From: Namhyung Kim @ 2024-09-14 18:02 UTC (permalink / raw) To: Tengda Wu Cc: Peter Zijlstra, song, Ingo Molnar, Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers, Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf Hello, On Thu, Sep 05, 2024 at 11:59:17AM +0000, Tengda Wu wrote: > bperf has a nice ability to share PMUs, but it still does not support > inherit events during fork(), resulting in some deviations in its stat > results compared with perf. > > perf stat result: > $ ./perf stat -e cycles,instructions -- ./perf test -w sqrtloop > > Performance counter stats for './perf test -w sqrtloop': > > 2,316,038,116 cycles > 2,859,350,725 instructions # 1.23 insn per cycle > > 1.009603637 seconds time elapsed > > 1.004196000 seconds user > 0.003950000 seconds sys > > bperf stat result: > $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop > > Performance counter stats for './perf test -w sqrtloop': > > 18,762,093 cycles > 23,487,766 instructions # 1.25 insn per cycle > > 1.008913769 seconds time elapsed > > 1.003248000 seconds user > 0.004069000 seconds sys > > In order to support event inheritance, two new bpf programs are added > to monitor the fork and exit of tasks respectively. When a task is > created, add it to the filter map to enable counting, and reuse the > `accum_key` of its parent task to count together with the parent task. > When a task exits, remove it from the filter map to disable counting. > > After support: > $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop > > Performance counter stats for './perf test -w sqrtloop': > > 2,316,543,537 cycles > 2,859,677,779 instructions # 1.23 insn per cycle > > 1.009566332 seconds time elapsed > > 1.004414000 seconds user > 0.003545000 seconds sys > > Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> > --- > tools/perf/util/bpf_counter.c | 32 +++++++-- > tools/perf/util/bpf_skel/bperf_follower.bpf.c | 70 +++++++++++++++++-- > tools/perf/util/bpf_skel/bperf_u.h | 5 ++ > 3 files changed, 94 insertions(+), 13 deletions(-) > > diff --git a/tools/perf/util/bpf_counter.c b/tools/perf/util/bpf_counter.c > index 7a8af60e0f51..94aa46f50052 100644 > --- a/tools/perf/util/bpf_counter.c > +++ b/tools/perf/util/bpf_counter.c > @@ -394,6 +394,7 @@ static int bperf_check_target(struct evsel *evsel, > } > > static struct perf_cpu_map *all_cpu_map; > +static __u32 filter_entry_cnt; > > static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, > struct perf_event_attr_map_entry *entry) > @@ -444,12 +445,31 @@ static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, > return err; > } > > +/* Attach programs on demand according to filter types to reduce overhead */ > +static int bperf_attach_follower_program(struct bperf_follower_bpf *skel, > + enum bperf_filter_type filter_type) > +{ > + struct bpf_link *link; > + int err = 0; > + > + if (filter_type == BPERF_FILTER_PID || > + filter_type == BPERF_FILTER_TGID) > + err = bperf_follower_bpf__attach(skel); > + else { > + link = bpf_program__attach(skel->progs.fexit_XXX); > + if (IS_ERR(link)) > + err = PTR_ERR(link); > + } > + > + return err; > +} > + > static int bperf__load(struct evsel *evsel, struct target *target) > { > struct perf_event_attr_map_entry entry = {0xffffffff, 0xffffffff}; > int attr_map_fd, diff_map_fd = -1, err; > enum bperf_filter_type filter_type; > - __u32 filter_entry_cnt, i; > + __u32 i; > > if (bperf_check_target(evsel, target, &filter_type, &filter_entry_cnt)) > return -1; > @@ -529,9 +549,6 @@ static int bperf__load(struct evsel *evsel, struct target *target) > /* set up reading map */ > bpf_map__set_max_entries(evsel->follower_skel->maps.accum_readings, > filter_entry_cnt); > - /* set up follower filter based on target */ > - bpf_map__set_max_entries(evsel->follower_skel->maps.filter, > - filter_entry_cnt); > err = bperf_follower_bpf__load(evsel->follower_skel); > if (err) { > pr_err("Failed to load follower skeleton\n"); > @@ -543,6 +560,7 @@ static int bperf__load(struct evsel *evsel, struct target *target) > for (i = 0; i < filter_entry_cnt; i++) { > int filter_map_fd; > __u32 key; > + struct bperf_filter_value fval = { i, 0 }; > > if (filter_type == BPERF_FILTER_PID || > filter_type == BPERF_FILTER_TGID) > @@ -553,12 +571,12 @@ static int bperf__load(struct evsel *evsel, struct target *target) > break; > > filter_map_fd = bpf_map__fd(evsel->follower_skel->maps.filter); > - bpf_map_update_elem(filter_map_fd, &key, &i, BPF_ANY); > + bpf_map_update_elem(filter_map_fd, &key, &fval, BPF_ANY); > } > > evsel->follower_skel->bss->type = filter_type; > > - err = bperf_follower_bpf__attach(evsel->follower_skel); > + err = bperf_attach_follower_program(evsel->follower_skel, filter_type); > > out: > if (err && evsel->bperf_leader_link_fd >= 0) > @@ -623,7 +641,7 @@ static int bperf__read(struct evsel *evsel) > bperf_sync_counters(evsel); > reading_map_fd = bpf_map__fd(skel->maps.accum_readings); > > - for (i = 0; i < bpf_map__max_entries(skel->maps.accum_readings); i++) { > + for (i = 0; i < filter_entry_cnt; i++) { > struct perf_cpu entry; > __u32 cpu; > > diff --git a/tools/perf/util/bpf_skel/bperf_follower.bpf.c b/tools/perf/util/bpf_skel/bperf_follower.bpf.c > index f193998530d4..32b944f28776 100644 > --- a/tools/perf/util/bpf_skel/bperf_follower.bpf.c > +++ b/tools/perf/util/bpf_skel/bperf_follower.bpf.c > @@ -5,6 +5,8 @@ > #include <bpf/bpf_tracing.h> > #include "bperf_u.h" > > +#define MAX_ENTRIES 102400 > + > struct { > __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); > __uint(key_size, sizeof(__u32)); > @@ -22,7 +24,9 @@ struct { > struct { > __uint(type, BPF_MAP_TYPE_HASH); > __uint(key_size, sizeof(__u32)); > - __uint(value_size, sizeof(__u32)); > + __uint(value_size, sizeof(struct bperf_filter_value)); > + __uint(max_entries, MAX_ENTRIES); > + __uint(map_flags, BPF_F_NO_PREALLOC); > } filter SEC(".maps"); > > enum bperf_filter_type type = 0; > @@ -33,14 +37,15 @@ int BPF_PROG(fexit_XXX) > { > struct bpf_perf_event_value *diff_val, *accum_val; > __u32 filter_key, zero = 0; > - __u32 *accum_key; > + __u32 accum_key; > + struct bperf_filter_value *fval; > > if (!enabled) > return 0; > > switch (type) { > case BPERF_FILTER_GLOBAL: > - accum_key = &zero; > + accum_key = zero; > goto do_add; > case BPERF_FILTER_CPU: > filter_key = bpf_get_smp_processor_id(); > @@ -55,16 +60,20 @@ int BPF_PROG(fexit_XXX) > return 0; > } > > - accum_key = bpf_map_lookup_elem(&filter, &filter_key); > - if (!accum_key) > + fval = bpf_map_lookup_elem(&filter, &filter_key); > + if (!fval) > return 0; > > + accum_key = fval->accum_key; > + if (fval->exited) > + bpf_map_delete_elem(&filter, &filter_key); > + > do_add: > diff_val = bpf_map_lookup_elem(&diff_readings, &zero); > if (!diff_val) > return 0; > > - accum_val = bpf_map_lookup_elem(&accum_readings, accum_key); > + accum_val = bpf_map_lookup_elem(&accum_readings, &accum_key); > if (!accum_val) > return 0; > > @@ -75,4 +84,53 @@ int BPF_PROG(fexit_XXX) > return 0; > } > > +/* The program is only used for PID or TGID filter types. */ > +SEC("tp_btf/task_newtask") > +int BPF_PROG(on_newtask, struct task_struct *task, __u64 clone_flags) > +{ > + __u32 parent_pid, child_pid; > + struct bperf_filter_value *parent_fval; > + struct bperf_filter_value child_fval = { 0 }; > + > + if (!enabled) > + return 0; > + > + parent_pid = bpf_get_current_pid_tgid() >> 32; > + child_pid = task->pid; Should it use pid or tgid depending on the filter type? Thanks, Namhyung > + > + /* Check if the current task is one of the target tasks to be counted */ > + parent_fval = bpf_map_lookup_elem(&filter, &parent_pid); > + if (!parent_fval) > + return 0; > + > + /* Start counting for the new task by adding it into filter map, > + * inherit the accum key of its parent task so that they can be > + * counted together. > + */ > + child_fval.accum_key = parent_fval->accum_key; > + child_fval.exited = 0; > + bpf_map_update_elem(&filter, &child_pid, &child_fval, BPF_NOEXIST); > + > + return 0; > +} > + > +/* The program is only used for PID or TGID filter types. */ > +SEC("tp_btf/sched_process_exit") > +int BPF_PROG(on_exittask, struct task_struct *task) > +{ > + __u32 pid; > + struct bperf_filter_value *fval; > + > + if (!enabled) > + return 0; > + > + /* Stop counting for this task by removing it from filter map */ > + pid = task->pid; > + fval = bpf_map_lookup_elem(&filter, &pid); > + if (fval) > + fval->exited = 1; > + > + return 0; > +} > + > char LICENSE[] SEC("license") = "Dual BSD/GPL"; > diff --git a/tools/perf/util/bpf_skel/bperf_u.h b/tools/perf/util/bpf_skel/bperf_u.h > index 1ce0c2c905c1..4a4a753980be 100644 > --- a/tools/perf/util/bpf_skel/bperf_u.h > +++ b/tools/perf/util/bpf_skel/bperf_u.h > @@ -11,4 +11,9 @@ enum bperf_filter_type { > BPERF_FILTER_TGID, > }; > > +struct bperf_filter_value { > + __u32 accum_key; > + __u8 exited; > +}; > + > #endif /* __BPERF_STAT_U_H */ > -- > 2.34.1 > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH -next v2 1/2] perf stat: Support inherit events during fork() for bperf 2024-09-14 18:02 ` Namhyung Kim @ 2024-09-15 11:22 ` Tengda Wu 0 siblings, 0 replies; 6+ messages in thread From: Tengda Wu @ 2024-09-15 11:22 UTC (permalink / raw) To: Namhyung Kim Cc: Peter Zijlstra, song, Ingo Molnar, Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers, Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf On 2024/9/15 2:02, Namhyung Kim wrote: > Hello, > > On Thu, Sep 05, 2024 at 11:59:17AM +0000, Tengda Wu wrote: >> bperf has a nice ability to share PMUs, but it still does not support >> inherit events during fork(), resulting in some deviations in its stat >> results compared with perf. >> >> perf stat result: >> $ ./perf stat -e cycles,instructions -- ./perf test -w sqrtloop >> >> Performance counter stats for './perf test -w sqrtloop': >> >> 2,316,038,116 cycles >> 2,859,350,725 instructions # 1.23 insn per cycle >> >> 1.009603637 seconds time elapsed >> >> 1.004196000 seconds user >> 0.003950000 seconds sys >> >> bperf stat result: >> $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop >> >> Performance counter stats for './perf test -w sqrtloop': >> >> 18,762,093 cycles >> 23,487,766 instructions # 1.25 insn per cycle >> >> 1.008913769 seconds time elapsed >> >> 1.003248000 seconds user >> 0.004069000 seconds sys >> >> In order to support event inheritance, two new bpf programs are added >> to monitor the fork and exit of tasks respectively. When a task is >> created, add it to the filter map to enable counting, and reuse the >> `accum_key` of its parent task to count together with the parent task. >> When a task exits, remove it from the filter map to disable counting. >> >> After support: >> $ ./perf stat --bpf-counters -e cycles,instructions -- ./perf test -w sqrtloop >> >> Performance counter stats for './perf test -w sqrtloop': >> >> 2,316,543,537 cycles >> 2,859,677,779 instructions # 1.23 insn per cycle >> >> 1.009566332 seconds time elapsed >> >> 1.004414000 seconds user >> 0.003545000 seconds sys >> >> Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> >> --- >> tools/perf/util/bpf_counter.c | 32 +++++++-- >> tools/perf/util/bpf_skel/bperf_follower.bpf.c | 70 +++++++++++++++++-- >> tools/perf/util/bpf_skel/bperf_u.h | 5 ++ >> 3 files changed, 94 insertions(+), 13 deletions(-) >> >> diff --git a/tools/perf/util/bpf_counter.c b/tools/perf/util/bpf_counter.c >> index 7a8af60e0f51..94aa46f50052 100644 >> --- a/tools/perf/util/bpf_counter.c >> +++ b/tools/perf/util/bpf_counter.c >> @@ -394,6 +394,7 @@ static int bperf_check_target(struct evsel *evsel, >> } >> >> static struct perf_cpu_map *all_cpu_map; >> +static __u32 filter_entry_cnt; >> >> static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, >> struct perf_event_attr_map_entry *entry) >> @@ -444,12 +445,31 @@ static int bperf_reload_leader_program(struct evsel *evsel, int attr_map_fd, >> return err; >> } >> >> +/* Attach programs on demand according to filter types to reduce overhead */ >> +static int bperf_attach_follower_program(struct bperf_follower_bpf *skel, >> + enum bperf_filter_type filter_type) >> +{ >> + struct bpf_link *link; >> + int err = 0; >> + >> + if (filter_type == BPERF_FILTER_PID || >> + filter_type == BPERF_FILTER_TGID) >> + err = bperf_follower_bpf__attach(skel); >> + else { >> + link = bpf_program__attach(skel->progs.fexit_XXX); >> + if (IS_ERR(link)) >> + err = PTR_ERR(link); >> + } >> + >> + return err; >> +} >> + >> static int bperf__load(struct evsel *evsel, struct target *target) >> { >> struct perf_event_attr_map_entry entry = {0xffffffff, 0xffffffff}; >> int attr_map_fd, diff_map_fd = -1, err; >> enum bperf_filter_type filter_type; >> - __u32 filter_entry_cnt, i; >> + __u32 i; >> >> if (bperf_check_target(evsel, target, &filter_type, &filter_entry_cnt)) >> return -1; >> @@ -529,9 +549,6 @@ static int bperf__load(struct evsel *evsel, struct target *target) >> /* set up reading map */ >> bpf_map__set_max_entries(evsel->follower_skel->maps.accum_readings, >> filter_entry_cnt); >> - /* set up follower filter based on target */ >> - bpf_map__set_max_entries(evsel->follower_skel->maps.filter, >> - filter_entry_cnt); >> err = bperf_follower_bpf__load(evsel->follower_skel); >> if (err) { >> pr_err("Failed to load follower skeleton\n"); >> @@ -543,6 +560,7 @@ static int bperf__load(struct evsel *evsel, struct target *target) >> for (i = 0; i < filter_entry_cnt; i++) { >> int filter_map_fd; >> __u32 key; >> + struct bperf_filter_value fval = { i, 0 }; >> >> if (filter_type == BPERF_FILTER_PID || >> filter_type == BPERF_FILTER_TGID) >> @@ -553,12 +571,12 @@ static int bperf__load(struct evsel *evsel, struct target *target) >> break; >> >> filter_map_fd = bpf_map__fd(evsel->follower_skel->maps.filter); >> - bpf_map_update_elem(filter_map_fd, &key, &i, BPF_ANY); >> + bpf_map_update_elem(filter_map_fd, &key, &fval, BPF_ANY); >> } >> >> evsel->follower_skel->bss->type = filter_type; >> >> - err = bperf_follower_bpf__attach(evsel->follower_skel); >> + err = bperf_attach_follower_program(evsel->follower_skel, filter_type); >> >> out: >> if (err && evsel->bperf_leader_link_fd >= 0) >> @@ -623,7 +641,7 @@ static int bperf__read(struct evsel *evsel) >> bperf_sync_counters(evsel); >> reading_map_fd = bpf_map__fd(skel->maps.accum_readings); >> >> - for (i = 0; i < bpf_map__max_entries(skel->maps.accum_readings); i++) { >> + for (i = 0; i < filter_entry_cnt; i++) { >> struct perf_cpu entry; >> __u32 cpu; >> >> diff --git a/tools/perf/util/bpf_skel/bperf_follower.bpf.c b/tools/perf/util/bpf_skel/bperf_follower.bpf.c >> index f193998530d4..32b944f28776 100644 >> --- a/tools/perf/util/bpf_skel/bperf_follower.bpf.c >> +++ b/tools/perf/util/bpf_skel/bperf_follower.bpf.c >> @@ -5,6 +5,8 @@ >> #include <bpf/bpf_tracing.h> >> #include "bperf_u.h" >> >> +#define MAX_ENTRIES 102400 >> + >> struct { >> __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY); >> __uint(key_size, sizeof(__u32)); >> @@ -22,7 +24,9 @@ struct { >> struct { >> __uint(type, BPF_MAP_TYPE_HASH); >> __uint(key_size, sizeof(__u32)); >> - __uint(value_size, sizeof(__u32)); >> + __uint(value_size, sizeof(struct bperf_filter_value)); >> + __uint(max_entries, MAX_ENTRIES); >> + __uint(map_flags, BPF_F_NO_PREALLOC); >> } filter SEC(".maps"); >> >> enum bperf_filter_type type = 0; >> @@ -33,14 +37,15 @@ int BPF_PROG(fexit_XXX) >> { >> struct bpf_perf_event_value *diff_val, *accum_val; >> __u32 filter_key, zero = 0; >> - __u32 *accum_key; >> + __u32 accum_key; >> + struct bperf_filter_value *fval; >> >> if (!enabled) >> return 0; >> >> switch (type) { >> case BPERF_FILTER_GLOBAL: >> - accum_key = &zero; >> + accum_key = zero; >> goto do_add; >> case BPERF_FILTER_CPU: >> filter_key = bpf_get_smp_processor_id(); >> @@ -55,16 +60,20 @@ int BPF_PROG(fexit_XXX) >> return 0; >> } >> >> - accum_key = bpf_map_lookup_elem(&filter, &filter_key); >> - if (!accum_key) >> + fval = bpf_map_lookup_elem(&filter, &filter_key); >> + if (!fval) >> return 0; >> >> + accum_key = fval->accum_key; >> + if (fval->exited) >> + bpf_map_delete_elem(&filter, &filter_key); >> + >> do_add: >> diff_val = bpf_map_lookup_elem(&diff_readings, &zero); >> if (!diff_val) >> return 0; >> >> - accum_val = bpf_map_lookup_elem(&accum_readings, accum_key); >> + accum_val = bpf_map_lookup_elem(&accum_readings, &accum_key); >> if (!accum_val) >> return 0; >> >> @@ -75,4 +84,53 @@ int BPF_PROG(fexit_XXX) >> return 0; >> } >> >> +/* The program is only used for PID or TGID filter types. */ >> +SEC("tp_btf/task_newtask") >> +int BPF_PROG(on_newtask, struct task_struct *task, __u64 clone_flags) >> +{ >> + __u32 parent_pid, child_pid; >> + struct bperf_filter_value *parent_fval; >> + struct bperf_filter_value child_fval = { 0 }; >> + >> + if (!enabled) >> + return 0; >> + >> + parent_pid = bpf_get_current_pid_tgid() >> 32; >> + child_pid = task->pid; > > Should it use pid or tgid depending on the filter type? > > Thanks, > Namhyung Oh, it should. I just find two issues here: One is that the task pid added under the TGID type will not be used by sched_switch prog, causing memory waste in map. Another is that using tgid to search for tasks under the PID type may find nothing, which would miss some child task counts. I'll fix them in the next version. Thank you for pointing this out. Tengda > >> + >> + /* Check if the current task is one of the target tasks to be counted */ >> + parent_fval = bpf_map_lookup_elem(&filter, &parent_pid); >> + if (!parent_fval) >> + return 0; >> + >> + /* Start counting for the new task by adding it into filter map, >> + * inherit the accum key of its parent task so that they can be >> + * counted together. >> + */ >> + child_fval.accum_key = parent_fval->accum_key; >> + child_fval.exited = 0; >> + bpf_map_update_elem(&filter, &child_pid, &child_fval, BPF_NOEXIST); >> + >> + return 0; >> +} >> + >> +/* The program is only used for PID or TGID filter types. */ >> +SEC("tp_btf/sched_process_exit") >> +int BPF_PROG(on_exittask, struct task_struct *task) >> +{ >> + __u32 pid; >> + struct bperf_filter_value *fval; >> + >> + if (!enabled) >> + return 0; >> + >> + /* Stop counting for this task by removing it from filter map */ >> + pid = task->pid; >> + fval = bpf_map_lookup_elem(&filter, &pid); >> + if (fval) >> + fval->exited = 1; >> + >> + return 0; >> +} >> + >> char LICENSE[] SEC("license") = "Dual BSD/GPL"; >> diff --git a/tools/perf/util/bpf_skel/bperf_u.h b/tools/perf/util/bpf_skel/bperf_u.h >> index 1ce0c2c905c1..4a4a753980be 100644 >> --- a/tools/perf/util/bpf_skel/bperf_u.h >> +++ b/tools/perf/util/bpf_skel/bperf_u.h >> @@ -11,4 +11,9 @@ enum bperf_filter_type { >> BPERF_FILTER_TGID, >> }; >> >> +struct bperf_filter_value { >> + __u32 accum_key; >> + __u8 exited; >> +}; >> + >> #endif /* __BPERF_STAT_U_H */ >> -- >> 2.34.1 >> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH -next v2 2/2] perf test: Use sqrtloop workload to test bperf event 2024-09-05 11:59 [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu 2024-09-05 11:59 ` [PATCH -next v2 1/2] perf stat: Support inherit events during fork() " Tengda Wu @ 2024-09-05 11:59 ` Tengda Wu 2024-09-14 6:58 ` [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu 2 siblings, 0 replies; 6+ messages in thread From: Tengda Wu @ 2024-09-05 11:59 UTC (permalink / raw) To: Peter Zijlstra Cc: song, Ingo Molnar, Arnaldo Carvalho de Melo, Namhyung Kim, Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers, Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf Replace `brstack` workload with `sqrtloop` workload, because `sqrtloop` workload contains fork(), which is suitable for testing the bperf event inheritance feature. Signed-off-by: Tengda Wu <wutengda@huaweicloud.com> --- tools/perf/tests/shell/stat_bpf_counters.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/tests/shell/stat_bpf_counters.sh b/tools/perf/tests/shell/stat_bpf_counters.sh index f250b7d6f773..831f02add75e 100755 --- a/tools/perf/tests/shell/stat_bpf_counters.sh +++ b/tools/perf/tests/shell/stat_bpf_counters.sh @@ -4,7 +4,7 @@ set -e -workload="perf test -w brstack" +workload="perf test -w sqrtloop" # check whether $2 is within +/- 20% of $1 compare_number() -- 2.34.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH -next v2 0/2] perf stat: Support inherit events for bperf 2024-09-05 11:59 [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu 2024-09-05 11:59 ` [PATCH -next v2 1/2] perf stat: Support inherit events during fork() " Tengda Wu 2024-09-05 11:59 ` [PATCH -next v2 2/2] perf test: Use sqrtloop workload to test bperf event Tengda Wu @ 2024-09-14 6:58 ` Tengda Wu 2 siblings, 0 replies; 6+ messages in thread From: Tengda Wu @ 2024-09-14 6:58 UTC (permalink / raw) To: Song Liu, Namhyung Kim, Peter Zijlstra Cc: Ingo Molnar, Arnaldo Carvalho de Melo, Mark Rutland, Alexander Shishkin, Jiri Olsa, Ian Rogers, Adrian Hunter, kan.liang, linux-perf-users, linux-kernel, bpf Hi Song and Numhyung, Gentle ping. This patch set provides event inheritance support for bperf during fork(). Currently, based on numhyung's feedback, the v2 version has been modified. Could you please take a look? Any comment or suggestion is appreciated. Thanks! Tengda On 2024/9/5 19:59, Tengda Wu wrote: > Hi, > > bperf (perf-stat --bpf-counter) has not supported inherit events > during fork() since it was first introduced. > > This patch series tries to add this support by: > 1) adding two new bpf programs to monitor task lifecycle; > 2) recording new tasks in the filter map dynamically; > 3) reusing `accum_key` of parent task for new tasks. > > Thanks, > Tengda > > > Changelog: > --------- > v2: (Address comments from Namhyung) > * Remove the unused init_filter_entries in follower bpf, declare > a global filter_entry_count in bpf_counter instead > * Attach on_newtask and on_exittask progs only if the filter type > is either PID or TGID > > v1: https://lore.kernel.org/all/20240904123103.732507-1-wutengda@huaweicloud.com/ > > > Tengda Wu (2): > perf stat: Support inherit events during fork() for bperf > perf test: Use sqrtloop workload to test bperf event > > tools/perf/tests/shell/stat_bpf_counters.sh | 2 +- > tools/perf/util/bpf_counter.c | 32 +++++++-- > tools/perf/util/bpf_skel/bperf_follower.bpf.c | 70 +++++++++++++++++-- > tools/perf/util/bpf_skel/bperf_u.h | 5 ++ > 4 files changed, 95 insertions(+), 14 deletions(-) > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2024-09-15 11:22 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-09-05 11:59 [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu 2024-09-05 11:59 ` [PATCH -next v2 1/2] perf stat: Support inherit events during fork() " Tengda Wu 2024-09-14 18:02 ` Namhyung Kim 2024-09-15 11:22 ` Tengda Wu 2024-09-05 11:59 ` [PATCH -next v2 2/2] perf test: Use sqrtloop workload to test bperf event Tengda Wu 2024-09-14 6:58 ` [PATCH -next v2 0/2] perf stat: Support inherit events for bperf Tengda Wu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).