From: "Marek Behún" <kabel@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: linux-phy@lists.infradead.org,
"Kishon Vijay Abraham I" <kishon@ti.com>,
pali@kernel.org, "Miquel Raynal" <miquel.raynal@bootlin.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Marek Behún" <kabel@kernel.org>
Subject: [PATCH phy v3 0/5] Armada 3720 comphy native implementation
Date: Mon, 3 Jan 2022 15:32:15 +0100 [thread overview]
Message-ID: <20220103143220.13070-1-kabel@kernel.org> (raw)
Hello Vinod,
this is v3 of series converting A3720 comphy to native kernel
implementation.
Tested on Turris MOX and ESPRESSObin (tested all supported PHY modes:
ethernet, PCIe, USB3, SATA).
Changes since v2:
- removed device-tree changing patch, Gregory applied it on mvebu/dt64
- changed raw spin lock to ordinary spin lock
- fixed indentation of gbe_phy_init_fix
- use FIELD_PREP() macro
Changes since v1 (all changes in patch 2/6):
- refactored to use GENMASK()
- fixed various register names to conform to Functional Specification
- refactored various register names to have uniform naming
- refactored register access into one function, which decides whether
the access should be direct or indirect, so as to not have all these
checks done everywhere in the code
- moved around one register definition to have the registers sorted
according to their offset
- added comments to some register definitions
- added support for PHY reset() method
- when changing PHY mode, the driver now resets the PHY and its
registers to put the PHY in known state
- fixed the power_off() method
- added spinlock guard when accessing PHY Selector register, since it
is shared between the PHYs and so the PHY mutex is insufficient
- upon driver probe changed the calls to power_off() to reset()
The original cover letter said:
The RPC calling to ARM Trusted Firmware implementation of Armada 3720
comphy driver caused quite a number of issues (explained more in patch 2).
This series fixes those issues by reimplementing the driver to native
kernel implementation.
The last 3 commits revert commits in AHCI, USB, and PCI drivers, that were
introduced there because of those issues.
Pali Rohár (5):
phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver
configuration
phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
3720"
Revert "PCI: aardvark: Fix initialization with old Marvell's Arm
Trusted Firmware"
drivers/ata/ahci.h | 2 -
drivers/ata/ahci_mvebu.c | 2 +-
drivers/ata/libahci_platform.c | 2 +-
drivers/pci/controller/pci-aardvark.c | 4 +-
drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1369 ++++++++++++++++--
drivers/usb/host/xhci-mvebu.c | 42 -
drivers/usb/host/xhci-mvebu.h | 6 -
drivers/usb/host/xhci-plat.c | 20 +-
drivers/usb/host/xhci-plat.h | 1 -
9 files changed, 1245 insertions(+), 203 deletions(-)
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2022-01-03 14:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-03 14:32 Marek Behún [this message]
2022-01-03 14:32 ` [PATCH phy v3 1/5] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 2/5] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation Marek Behún
2022-02-02 15:52 ` Vinod Koul
2022-02-03 21:39 ` Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 3/5] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 4/5] Revert "usb: host: xhci: mvebu: make USB 3.0 " Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 5/5] Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware" Marek Behún
2022-01-17 14:58 ` [PATCH phy v3 0/5] Armada 3720 comphy native implementation Marek Behún
2022-01-27 5:27 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220103143220.13070-1-kabel@kernel.org \
--to=kabel@kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kishon@ti.com \
--cc=linux-phy@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=pali@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).