linux-phy.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: linux-phy@lists.infradead.org,
	Kishon Vijay Abraham I <kishon@ti.com>,
	pali@kernel.org, Miquel Raynal <miquel.raynal@bootlin.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>
Subject: Re: [PATCH phy v3 0/5] Armada 3720 comphy native implementation
Date: Mon, 17 Jan 2022 15:58:51 +0100	[thread overview]
Message-ID: <20220117155851.5759b337@thinkpad> (raw)
In-Reply-To: <20220103143220.13070-1-kabel@kernel.org>

Dear Vinod,

did you find time to look at this series?

Marek

On Mon,  3 Jan 2022 15:32:15 +0100
Marek Behún <kabel@kernel.org> wrote:

> Hello Vinod,
> 
> this is v3 of series converting A3720 comphy to native kernel
> implementation.
> 
> Tested on Turris MOX and ESPRESSObin (tested all supported PHY modes:
> ethernet, PCIe, USB3, SATA).
> 
> Changes since v2:
> - removed device-tree changing patch, Gregory applied it on mvebu/dt64
> - changed raw spin lock to ordinary spin lock
> - fixed indentation of gbe_phy_init_fix
> - use FIELD_PREP() macro
> 
> Changes since v1 (all changes in patch 2/6):
> - refactored to use GENMASK()
> - fixed various register names to conform to Functional Specification
> - refactored various register names to have uniform naming
> - refactored register access into one function, which decides whether
>   the access should be direct or indirect, so as to not have all these
>   checks done everywhere in the code
> - moved around one register definition to have the registers sorted
>   according to their offset
> - added comments to some register definitions
> - added support for PHY reset() method
> - when changing PHY mode, the driver now resets the PHY and its
>   registers to put the PHY in known state
> - fixed the power_off() method
> - added spinlock guard when accessing PHY Selector register, since it
>   is shared between the PHYs and so the PHY mutex is insufficient
> - upon driver probe changed the calls to power_off() to reset()
> 
> 
> The original cover letter said:
> 
> The RPC calling to ARM Trusted Firmware implementation of Armada 3720
> comphy driver caused quite a number of issues (explained more in patch 2).
> 
> This series fixes those issues by reimplementing the driver to native
> kernel implementation.
> 
> The last 3 commits revert commits in AHCI, USB, and PCI drivers, that were
> introduced there because of those issues.
> 
> Pali Rohár (5):
>   phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver
>     configuration
>   phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
>   Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
>   Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
>     3720"
>   Revert "PCI: aardvark: Fix initialization with old Marvell's Arm
>     Trusted Firmware"
> 
>  drivers/ata/ahci.h                           |    2 -
>  drivers/ata/ahci_mvebu.c                     |    2 +-
>  drivers/ata/libahci_platform.c               |    2 +-
>  drivers/pci/controller/pci-aardvark.c        |    4 +-
>  drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1369 ++++++++++++++++--
>  drivers/usb/host/xhci-mvebu.c                |   42 -
>  drivers/usb/host/xhci-mvebu.h                |    6 -
>  drivers/usb/host/xhci-plat.c                 |   20 +-
>  drivers/usb/host/xhci-plat.h                 |    1 -
>  9 files changed, 1245 insertions(+), 203 deletions(-)
> 


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-01-17 15:01 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-03 14:32 [PATCH phy v3 0/5] Armada 3720 comphy native implementation Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 1/5] phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 2/5] phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation Marek Behún
2022-02-02 15:52   ` Vinod Koul
2022-02-03 21:39     ` Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 3/5] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 4/5] Revert "usb: host: xhci: mvebu: make USB 3.0 " Marek Behún
2022-01-03 14:32 ` [PATCH phy v3 5/5] Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware" Marek Behún
2022-01-17 14:58 ` Marek Behún [this message]
2022-01-27  5:27   ` [PATCH phy v3 0/5] Armada 3720 comphy native implementation Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220117155851.5759b337@thinkpad \
    --to=kabel@kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=kishon@ti.com \
    --cc=linux-phy@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=pali@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).