From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
Wesley Cheng <quic_wcheng@quicinc.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] phy: qcom-qmp: Add SC8280XP USB3 UNI phy
Date: Tue, 9 Aug 2022 21:23:02 -0700 [thread overview]
Message-ID: <20220810042303.3583194-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220810042303.3583194-1-bjorn.andersson@linaro.org>
The SC8280XP platform has two instances of the 5nm USB3 UNI phy attached
to the multi-port USB controller, add definition for these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h | 12 ++
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 137 +++++++++++++++++++++
2 files changed, 149 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
index 61a44519f969..e1f2faa2493d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
@@ -7,11 +7,23 @@
#define QCOM_PHY_QMP_PCS_V5_H_
/* Only for QMP V5 PHY - USB/PCIe PCS registers */
+#define QPHY_V5_PCS_LOCK_DETECT_CONFIG1 0x0c4
+#define QPHY_V5_PCS_LOCK_DETECT_CONFIG2 0x0c8
+#define QPHY_V5_PCS_LOCK_DETECT_CONFIG3 0x0cc
+#define QPHY_V5_PCS_LOCK_DETECT_CONFIG6 0x0d8
#define QPHY_V5_PCS_REFGEN_REQ_CONFIG1 0x0dc
#define QPHY_V5_PCS_G3S2_PRE_GAIN 0x170
#define QPHY_V5_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
+#define QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
#define QPHY_V5_PCS_RATE_SLEW_CNTRL1 0x198
+#define QPHY_V5_PCS_CDR_RESET_TIME 0x1b0
+#define QPHY_V5_PCS_ALIGN_DETECT_CONFIG1 0x1c0
+#define QPHY_V5_PCS_ALIGN_DETECT_CONFIG2 0x1c4
+#define QPHY_V5_PCS_PCS_TX_RX_CONFIG 0x1d0
+#define QPHY_V5_PCS_EQ_CONFIG1 0x1dc
#define QPHY_V5_PCS_EQ_CONFIG2 0x1e0
#define QPHY_V5_PCS_EQ_CONFIG3 0x1e4
+#define QPHY_V5_PCS_EQ_CONFIG5 0x1ec
#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 1d270356a97f..ce0e2acb7094 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1338,6 +1338,111 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
};
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xa5),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e),
+};
+
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0xbd),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xe4),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_ENABLES, 0x00),
+};
+
+static const struct qmp_phy_init_tbl sc8280xp_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
struct qmp_phy;
/* struct qmp_phy_cfg - per-PHY initialization config */
@@ -1633,6 +1738,35 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.is_dual_lane_phy = true,
};
+static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sc8280xp_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sc8280xp_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_tx_tbl),
+ .rx_tbl = sc8280xp_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sc8280xp_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .phy_status = PHYSTATUS,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
.type = PHY_TYPE_USB3,
.nlanes = 1,
@@ -2594,6 +2728,9 @@ static const struct of_device_id qcom_qmp_phy_usb_of_match_table[] = {
}, {
.compatible = "qcom,sc8180x-qmp-usb3-phy",
.data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sc8280xp-qmp-usb3-uni-phy",
+ .data = &sc8280xp_usb3_uniphy_cfg,
}, {
.compatible = "qcom,sdm845-qmp-usb3-phy",
.data = &qmp_v3_usb3phy_cfg,
--
2.35.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2022-08-10 4:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-10 4:22 [PATCH v2 0/4] phy: qcom-qmp: Add SC8280XP USB PHYs Bjorn Andersson
2022-08-10 4:23 ` [PATCH v2 1/4] dt-bindings: phy: qcom,qmp: Add compatible for SC8280XP USB phys Bjorn Andersson
2022-08-10 14:48 ` Krzysztof Kozlowski
2022-08-10 4:23 ` [PATCH v2 2/4] phy: qcom-qmp-combo: Parameterize swing and pre_emphasis tables Bjorn Andersson
2022-08-10 4:23 ` Bjorn Andersson [this message]
2022-08-10 4:23 ` [PATCH v2 4/4] phy: qcom-qmp-combo: Add sc8280xp USB/DP combo phys Bjorn Andersson
2022-08-30 7:38 ` [PATCH v2 0/4] phy: qcom-qmp: Add SC8280XP USB PHYs Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220810042303.3583194-4-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=quic_wcheng@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox