Re: [PATCH v2 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200

From: Rob Herring <robh@kernel.org>
To: Siddharth Vadapalli <s-vadapalli@ti.com>
Cc: lee.jones@linaro.org, krzysztof.kozlowski+dt@linaro.org,
	kishon@ti.com, vkoul@kernel.org, dan.carpenter@oracle.com,
	grygorii.strashko@ti.com, rogerq@kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-phy@lists.infradead.org
Subject: Re: [PATCH v2 1/2] dt-bindings: phy: ti: phy-gmii-sel: Add bindings for J7200
Date: Thu, 18 Aug 2022 08:43:26 -0600	[thread overview]
Message-ID: <20220818144326.GA1829017-robh@kernel.org> (raw)
In-Reply-To: <20220816055848.111482-2-s-vadapalli@ti.com>

On Tue, Aug 16, 2022 at 11:28:47AM +0530, Siddharth Vadapalli wrote:
> TI's J7200 SoC supports additional PHY modes like QSGMII and SGMII
> that are not supported on earlier SoCs. Add a compatible for it.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
>  .../mfd/ti,j721e-system-controller.yaml       |  5 ++++
>  .../bindings/phy/ti,phy-gmii-sel.yaml         | 27 ++++++++++++++++++-
>  2 files changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> index 73cffc45e056..527fd47b648b 100644
> --- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
> @@ -54,6 +54,11 @@ patternProperties:
>      description:
>        Clock provider for TI EHRPWM nodes.
>  
> +  "phy@[0-9a-f]+$":
> +    type: object
> +    description:
> +      This is the register to set phy mode through phy-gmii-sel driver.

No properties for this node? A whole node for 1 register?

Or this node is ti,phy-gmii-sel.yaml? If so, add a $ref to it.

> +
>  required:
>    - compatible
>    - reg
> diff --git a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> index ff8a6d9eb153..54da408d0360 100644
> --- a/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,phy-gmii-sel.yaml
> @@ -53,12 +53,21 @@ properties:
>        - ti,am43xx-phy-gmii-sel
>        - ti,dm814-phy-gmii-sel
>        - ti,am654-phy-gmii-sel
> +      - ti,j7200-cpsw5g-phy-gmii-sel
>  
>    reg:
>      maxItems: 1
>  
>    '#phy-cells': true
>  
> +  ti,qsgmii-main-ports:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |
> +      Required only for QSGMII mode. Array to select the port for
> +      QSGMII main mode. Rest of the ports are selected as QSGMII_SUB
> +      ports automatically. Any one of the 4 CPSW5G ports can act as the
> +      main port with the rest of them being the QSGMII_SUB ports.

Constraints? 

> +
>  allOf:
>    - if:
>        properties:
> @@ -73,6 +82,22 @@ allOf:
>          '#phy-cells':
>            const: 1
>            description: CPSW port number (starting from 1)
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - ti,j7200-cpsw5g-phy-gmii-sel
> +    then:
> +      properties:
> +        '#phy-cells':
> +          const: 1
> +          description: CPSW port number (starting from 1)
> +        ti,qsgmii-main-ports:
> +          maxItems: 1

An array, but only 1 entry allowed?

> +          items:
> +            minimum: 1
> +            maximum: 4

Can't this be up above?

>    - if:
>        properties:
>          compatible:
> @@ -97,7 +122,7 @@ additionalProperties: false
>  
>  examples:
>    - |
> -    phy_gmii_sel: phy-gmii-sel@650 {
> +    phy_gmii_sel: phy@650 {
>          compatible = "ti,am3352-phy-gmii-sel";
>          reg = <0x650 0x4>;
>          #phy-cells = <2>;
> -- 
> 2.25.1
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy