linux-phy.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan+linaro@kernel.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2 06/11] phy: qcom-qmp-usb: fix memleak on probe deferral
Date: Fri, 16 Sep 2022 12:23:35 +0200	[thread overview]
Message-ID: <20220916102340.11520-7-johan+linaro@kernel.org> (raw)
In-Reply-To: <20220916102340.11520-1-johan+linaro@kernel.org>

Switch to using the device-managed of_iomap helper to avoid leaking
memory on probe deferral and driver unbind.

Note that this helper checks for already reserved regions and may fail
if there are multiple devices claiming the same memory.

Two bindings currently rely on overlapping mappings for the PCS region
so fallback to non-exclusive mappings for those for now.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 57 ++++++++++++++++++-------
 1 file changed, 42 insertions(+), 15 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 41635c21e3ca..41513cef3d99 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -2606,6 +2606,21 @@ static const struct phy_ops qmp_usb_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static void __iomem *qmp_usb_iomap(struct device *dev, struct device_node *np,
+					int index, bool exclusive)
+{
+	struct resource res;
+
+	if (!exclusive) {
+		if (of_address_to_resource(np, index, &res))
+			return IOMEM_ERR_PTR(-EINVAL);
+
+		return devm_ioremap(dev, res.start, resource_size(&res));
+	}
+
+	return devm_of_iomap(dev, np, index, NULL);
+}
+
 static
 int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 			void __iomem *serdes, const struct qmp_phy_cfg *cfg)
@@ -2613,8 +2628,18 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
+	bool exclusive = true;
 	int ret;
 
+	/*
+	 * FIXME: These bindings should be fixed to not rely on overlapping
+	 *        mappings for PCS.
+	 */
+	if (of_device_is_compatible(dev->of_node, "qcom,sdx65-qmp-usb3-uni-phy"))
+		exclusive = false;
+	if (of_device_is_compatible(dev->of_node, "qcom,sm8350-qmp-usb3-uni-phy"))
+		exclusive = false;
+
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
 	if (!qphy)
 		return -ENOMEM;
@@ -2627,17 +2652,17 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 	 * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
 	 * For single lane PHYs: pcs_misc (optional) -> 3.
 	 */
-	qphy->tx = of_iomap(np, 0);
-	if (!qphy->tx)
-		return -ENOMEM;
+	qphy->tx = devm_of_iomap(dev, np, 0, NULL);
+	if (IS_ERR(qphy->tx))
+		return PTR_ERR(qphy->tx);
 
-	qphy->rx = of_iomap(np, 1);
-	if (!qphy->rx)
-		return -ENOMEM;
+	qphy->rx = devm_of_iomap(dev, np, 1, NULL);
+	if (IS_ERR(qphy->rx))
+		return PTR_ERR(qphy->rx);
 
-	qphy->pcs = of_iomap(np, 2);
-	if (!qphy->pcs)
-		return -ENOMEM;
+	qphy->pcs = qmp_usb_iomap(dev, np, 2, exclusive);
+	if (IS_ERR(qphy->pcs))
+		return PTR_ERR(qphy->pcs);
 
 	if (cfg->pcs_usb_offset)
 		qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
@@ -2649,9 +2674,9 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 	 * offset from the first lane.
 	 */
 	if (cfg->is_dual_lane_phy) {
-		qphy->tx2 = of_iomap(np, 3);
-		qphy->rx2 = of_iomap(np, 4);
-		if (!qphy->tx2 || !qphy->rx2) {
+		qphy->tx2 = devm_of_iomap(dev, np, 3, NULL);
+		qphy->rx2 = devm_of_iomap(dev, np, 4, NULL);
+		if (IS_ERR(qphy->tx2) || IS_ERR(qphy->rx2)) {
 			dev_warn(dev,
 				 "Underspecified device tree, falling back to legacy register regions\n");
 
@@ -2661,15 +2686,17 @@ int qmp_usb_create(struct device *dev, struct device_node *np, int id,
 			qphy->rx2 = qphy->rx + QMP_PHY_LEGACY_LANE_STRIDE;
 
 		} else {
-			qphy->pcs_misc = of_iomap(np, 5);
+			qphy->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
 		}
 
 	} else {
-		qphy->pcs_misc = of_iomap(np, 3);
+		qphy->pcs_misc = devm_of_iomap(dev, np, 3, NULL);
 	}
 
-	if (!qphy->pcs_misc)
+	if (IS_ERR(qphy->pcs_misc)) {
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
+		qphy->pcs_misc = NULL;
+	}
 
 	qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
 	if (IS_ERR(qphy->pipe_clk)) {
-- 
2.35.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2022-09-16 11:32 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-16 10:23 [PATCH v2 00/11] phy: qcom-qmp: more fixes and cleanups Johan Hovold
2022-09-16 10:23 ` [PATCH v2 01/11] phy: qcom-qmp-pcie: add pcs_misc sanity check Johan Hovold
2022-09-16 10:23 ` [PATCH v2 02/11] phy: qcom-qmp-pcie: fix memleak on probe deferral Johan Hovold
2022-09-16 10:23 ` [PATCH v2 03/11] phy: qcom-qmp-pcie-msm8996: " Johan Hovold
2022-09-16 10:23 ` [PATCH v2 04/11] phy: qcom-qmp-combo: " Johan Hovold
2022-09-16 10:23 ` [PATCH v2 05/11] phy: qcom-qmp-ufs: " Johan Hovold
2022-09-16 10:23 ` Johan Hovold [this message]
2022-09-16 10:23 ` [PATCH v2 07/11] phy: qcom-qmp-pcie-msm8996: drop unused pcs_misc handling Johan Hovold
2022-09-16 10:23 ` [PATCH v2 08/11] phy: qcom-qmp-pcie: drop unused legacy DT workaround Johan Hovold
2022-09-16 10:23 ` [PATCH v2 09/11] phy: qcom-qmp-combo: " Johan Hovold
2022-09-16 10:23 ` [PATCH v2 10/11] phy: qcom-qmp-ufs: drop " Johan Hovold
2022-09-16 10:23 ` [PATCH v2 11/11] phy: qcom-qmp-usb: " Johan Hovold
2022-09-20  6:01 ` [PATCH v2 00/11] phy: qcom-qmp: more fixes and cleanups Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220916102340.11520-7-johan+linaro@kernel.org \
    --to=johan+linaro@kernel.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=kishon@ti.com \
    --cc=konrad.dybcio@somainline.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).