From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org
Subject: [PATCH v3 04/13] phy: qcom-qmp-pcie: rename regs layout arrays
Date: Thu, 10 Nov 2022 22:22:39 +0300 [thread overview]
Message-ID: <20221110192248.873973-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20221110192248.873973-1-dmitry.baryshkov@linaro.org>
Rename regs layouts to follow the QMP PHY version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 52 +++++++++++-----------
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h | 4 ++
2 files changed, 30 insertions(+), 26 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 7de0ac23ff0b..4bab804a2ed8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -76,21 +76,14 @@ enum qphy_reg_layout {
QPHY_LAYOUT_SIZE
};
-static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET,
- [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
- [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
- [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
-};
-
-static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int pciephy_v2_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET,
[QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS,
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_POWER_DOWN_CONTROL,
};
-static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int pciephy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET,
[QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS,
@@ -104,13 +97,20 @@ static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
};
-static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
+static const unsigned int pciephy_v4_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET,
[QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
};
+static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
+};
+
static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14),
QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
@@ -1678,7 +1678,7 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
.num_vregs = 0,
- .regs = pciephy_regs_layout,
+ .regs = pciephy_v2_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1705,7 +1705,7 @@ static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = {
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
.num_vregs = 0,
- .regs = ipq_pciephy_gen3_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1734,7 +1734,7 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = {
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = NULL,
.num_vregs = 0,
- .regs = ipq_pciephy_gen3_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1761,7 +1761,7 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sdm845_qmp_pciephy_regs_layout,
+ .regs = pciephy_v3_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1823,7 +1823,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1860,7 +1860,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1885,7 +1885,7 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = {
.num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = pciephy_regs_layout,
+ .regs = pciephy_v3_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1914,7 +1914,7 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1949,7 +1949,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x1_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -1984,7 +1984,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -2022,7 +2022,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x4_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -2049,7 +2049,7 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN,
.phy_status = PHYSTATUS_4_20,
@@ -2086,7 +2086,7 @@ static const struct qmp_phy_cfg sm8350_qmp_gen3x1_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -2123,7 +2123,7 @@ static const struct qmp_phy_cfg sm8350_qmp_gen3x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -2158,7 +2158,7 @@ static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v4_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS,
@@ -2200,7 +2200,7 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8250_pcie_regs_layout,
+ .regs = pciephy_v5_regs_layout,
.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
index 04f260711ea1..36cc80bb9059 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
@@ -7,6 +7,10 @@
#define QCOM_PHY_QMP_PCS_V5_H_
/* Only for QMP V5 PHY - USB/PCIe PCS registers */
+#define QPHY_V5_PCS_SW_RESET 0x000
+#define QPHY_V5_PCS_PCS_STATUS1 0x014
+#define QPHY_V5_PCS_POWER_DOWN_CONTROL 0x040
+#define QPHY_V5_PCS_START_CONTROL 0x044
#define QPHY_V5_PCS_LOCK_DETECT_CONFIG1 0x0c4
#define QPHY_V5_PCS_LOCK_DETECT_CONFIG2 0x0c8
#define QPHY_V5_PCS_LOCK_DETECT_CONFIG3 0x0cc
--
2.35.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2022-11-10 19:32 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-10 19:22 [PATCH v3 00/13] phy: qcom-qmp: rework register layout tables Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 01/13] phy: qcom-qmp: fix typo in QSERDES_COM_CMN_RSVD5 value Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 02/13] phy: qcom-qmp: remove duplicate v5_5nm register definitions Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 03/13] phy: qcom-qmp-pcie: rework regs layout arrays Dmitry Baryshkov
2022-11-10 19:22 ` Dmitry Baryshkov [this message]
2022-11-10 19:22 ` [PATCH v3 05/13] phy: qcom-qmp-pcie-msm8996: " Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 06/13] phy: qcom-qmp-ufs: split UFS-specific v2 PCS registers to a separate header Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 07/13] phy: qcom-qmp-ufs: rework regs layout arrays Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 08/13] phy: qcom-qmp-ufs: rename " Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 09/13] phy: qcom-qmp-usb: remove QPHY_PCS_LFPS_RXTERM_IRQ_STATUS reg Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 10/13] phy: qcom-qmp-usb: remove QPHY_PCS_MISC_TYPEC_CTRL reg Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 11/13] phy: qcom-qmp-usb: rework regs layout arrays Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 12/13] phy: qcom-qmp-usb: fix " Dmitry Baryshkov
2022-11-10 19:22 ` [PATCH v3 13/13] phy: qcom-qmp: move type-specific headers to particular driver Dmitry Baryshkov
2023-01-12 17:20 ` [PATCH v3 00/13] phy: qcom-qmp: rework register layout tables Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221110192248.873973-5-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox