Re: [PATCH 08/10] dt-bindings: phy: Add qcom,snps-eusb2-phy schema file

[Rob Herring <robh@kernel.org>]

On Wed, Nov 16, 2022 at 02:01:55PM +0200, Abel Vesa wrote:
> The SM8550 SoC uses Synopsis eUSB2 PHY. Add a dt-binding schema
> for the new driver.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  .../bindings/phy/qcom,snps-eusb2-phy.yaml     | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> new file mode 100644
> index 000000000000..d6a4bdd0cd42
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,snps-eusb2-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm SNPS eUSB2 phy controller
> +
> +maintainers:
> +  - Abel Vesa <abel.vesa@linaro.org>
> +
> +description:
> +  eUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
> +
> +properties:
> +  compatible:
> +    const: qcom,sm8550-snps-eusb2-phy
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: ref src

parent to 'ref'? If so, parent clocks don't go in 'clocks'.

> +      - description: ref
> +
> +  clock-names:
> +    items:
> +      - const: ref_src
> +      - const: ref
> +
> +  usb-repeater:
> +    description:
> +      Phandle to eUSB2 to USB 2.0 repeater
> +
> +  vdd-supply:
> +    description:
> +      Phandle to 0.88V regulator supply to PHY digital circuit.
> +
> +  vdda12-supply:
> +    description:
> +      Phandle to 1.2V regulator supply to PHY refclk pll block.
> +
> +  resets:
> +    maxItems: 1
> +    description:
> +      Phandle to reset to phy block.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +  - clocks
> +  - clock-names
> +  - vdd-supply
> +  - vdda12-supply
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sm8550.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/clock/qcom,tcsrcc-sm8550.h>
> +
> +    usb_1_hsphy: phy@88e3000 {
> +        compatible = "qcom,sm8550-snps-eusb2-phy";
> +        reg = <0x88e3000 0x154>;
> +        #phy-cells = <0>;
> +
> +        clocks = <&rpmhcc RPMH_CXO_PAD_CLK>,
> +                 <&tcsrcc TCSR_USB2_CLKREF_EN>;
> +        clock-names = "ref_src", "ref";
> +
> +        vdd-supply = <&vreg_l1e_0p88>;
> +        vdda12-supply = <&vreg_l3e_1p2>;
> +
> +        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +    };
> -- 
> 2.34.1
> 
> 

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy