From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 4/6] phy: qcom-qmp: qserdes-txrx-ufs: Add v6 register offsets
Date: Thu, 12 Jan 2023 15:05:40 +0200 [thread overview]
Message-ID: <20230112130542.1399921-5-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230112130542.1399921-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new qserdes TX RX but UFS specific offsets
in a dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
.../phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 30 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 31 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
new file mode 100644
index 000000000000..e4d38fefdf18
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
+
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_TX 0x28
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0x08
+#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0x10
+
+#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214
+#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6 0x220
+#define QSERDES_UFS_V6_RX_MODE_RATE2_B3 0x238
+#define QSERDES_UFS_V6_RX_MODE_RATE2_B6 0x244
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B3 0x25c
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B4 0x260
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264
+#define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280
+#define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 62796ff5c35e..6d6108925716 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-01-12 13:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 13:05 [PATCH v2 0/6] phy: qualcomm: Add UFS support for SM8550 Abel Vesa
2023-01-12 13:05 ` [PATCH v2 1/6] dt-bindings: phy: Add QMP UFS PHY comptible " Abel Vesa
2023-01-12 14:32 ` Krzysztof Kozlowski
2023-01-12 13:05 ` [PATCH v2 2/6] phy: qcom-qmp: qserdes-com: Add v6 register offsets Abel Vesa
2023-01-12 13:05 ` [PATCH v2 3/6] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-01-12 13:05 ` Abel Vesa [this message]
2023-01-12 13:05 ` [PATCH v2 5/6] phy: qcom-qmp: pcs-ufs: " Abel Vesa
2023-01-12 13:05 ` [PATCH v2 6/6] phy: qcom-qmp-ufs: Add SM8550 support Abel Vesa
2023-01-12 15:29 ` Johan Hovold
2023-01-13 18:35 ` Vinod Koul
2023-01-16 14:14 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112130542.1399921-5-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox