[PATCH v3 0/5] arm64: meson: support Amlogic A1 USB OTG controller

From: Dmitry Rokosov <ddrokosov@sberdevices.ru>
To: <gregkh@linuxfoundation.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <neil.armstrong@linaro.org>,
	<khilman@baylibre.com>, <jbrunet@baylibre.com>,
	<martin.blumenstingl@googlemail.com>, <mturquette@baylibre.com>,
	<vkoul@kernel.org>, <kishon@kernel.org>, <hminas@synopsys.com>,
	<Thinh.Nguyen@synopsys.com>
Cc: <yue.wang@amlogic.com>, <hanjie.lin@amlogic.com>,
	<kernel@sberdevices.ru>, <rockosov@gmail.com>,
	<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-phy@lists.infradead.org>,
	Dmitry Rokosov <ddrokosov@sberdevices.ru>
Subject: [PATCH v3 0/5] arm64: meson: support Amlogic A1 USB OTG controller
Date: Wed, 26 Apr 2023 13:29:17 +0300	[thread overview]
Message-ID: <20230426102922.19705-1-ddrokosov@sberdevices.ru> (raw)

This patch series introduces full support for the Amlogic A1 USB controller
in OTG mode (peripheral and host modes switching).

Previously, Amlogic's patch series [1] was applied to the upstream tree,
but it only had USB host mode support.
Furthermore, the device tree patchset [2] wasn't merged due to a missing
clk driver.
Patchset [2] has been completely reworked:
    - changed register base offsets to proper values
    - introduced dwc2 in peripheral mode
    - OTG mode support
    - the SoB of Amlogic authors still remain

Testing:
    - USB OTG role switching between gadget and host - OK
    - Peripheral mode - OK (tested with adb shell/push/pop)
    - Host mode - OK (tested only USB enumeration and detection)

Changes v3 since v2 at [4]:
    - if reset_control_reset() fails during phy_exit() callback
      execution, do not disable clkin, instead, return an error
      immediately
    - provide proper 'phy-names' for the dwc2 device tree node as
      'usb2-phy' instead of 'usb2_phy' (replace underscore with dash)

Changes v2 since v1 at [3]:
    - as Martin suggested in v1, this commit completely removes
      the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata;
      this parameter is no longer necessary as all IP versions now
      support OTG switching
    - this commit moves the USB PHY clkin enable/disable calls to
      the PHY init/exit routines

Links:
    [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/
    [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/
    [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/
    [4] https://lore.kernel.org/all/20230418111612.19479-1-ddrokosov@sberdevices.ru/

Dmitry Rokosov (5):
  phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit
  usb: dwc2: support dwc2 IP for Amlogic A1 SoC family
  dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral
  usb: dwc3-meson-g12a: support OTG switch for all IP versions
  arm64: dts: meson: a1: support USB controller in OTG mode

 .../devicetree/bindings/usb/dwc2.yaml         |  1 +
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 59 +++++++++++++++++++
 drivers/phy/amlogic/phy-meson-g12a-usb2.c     | 15 ++++-
 drivers/usb/dwc2/params.c                     | 21 +++++++
 drivers/usb/dwc3/dwc3-meson-g12a.c            | 16 +----
 5 files changed, 97 insertions(+), 15 deletions(-)

-- 
2.36.0

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy