From: Wayne Chang <waynec@nvidia.com>
To: <waynec@nvidia.com>, <jonathanh@nvidia.com>,
<thierry.reding@gmail.com>, <jckuo@nvidia.com>,
<vkoul@kernel.org>, <kishon@kernel.org>,
<gregkh@linuxfoundation.org>
Cc: <linux-phy@lists.infradead.org>, <linux-tegra@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<stable@vger.kernel.org>
Subject: [PATCH 2/2] usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
Date: Wed, 6 Mar 2024 00:11:22 +0800 [thread overview]
Message-ID: <20240305161122.1254099-3-waynec@nvidia.com> (raw)
In-Reply-To: <20240305161122.1254099-1-waynec@nvidia.com>
This commit resolves an issue in the tegra-xudc USB gadget driver that
incorrectly fetched USB3 PHY instances. The problem stemmed from the
assumption of a one-to-one correspondence between USB2 and USB3 PHY
names and their association with physical USB ports in the device tree.
Previously, the driver associated USB3 PHY names directly with the USB3
instance number, leading to mismatches when mapping the physical USB
ports. For instance, if using USB3-1 PHY, the driver expect the
corresponding PHY name as 'usb3-1'. However, the physical USB ports in
the device tree were designated as USB2-0 and USB3-0 as we only have
one device controller, causing a misalignment.
This commit rectifies the issue by adjusting the PHY naming logic.
Now, the driver correctly correlates the USB2 and USB3 PHY instances,
allowing the USB2-0 and USB3-1 PHYs to form a physical USB port pair
while accurately reflecting their configuration in the device tree by
naming them USB2-0 and USB3-0, respectively.
The change ensures that the PHY and PHY names align appropriately,
resolving the mismatch between physical USB ports and their associated
names in the device tree.
Fixes: b4e19931c98a ("usb: gadget: tegra-xudc: Support multiple device modes")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
---
drivers/usb/gadget/udc/tegra-xudc.c | 39 ++++++++++++++++++-----------
1 file changed, 25 insertions(+), 14 deletions(-)
diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c
index cb85168fd00c..7aa46d426f31 100644
--- a/drivers/usb/gadget/udc/tegra-xudc.c
+++ b/drivers/usb/gadget/udc/tegra-xudc.c
@@ -3491,8 +3491,8 @@ static void tegra_xudc_device_params_init(struct tegra_xudc *xudc)
static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
{
- int err = 0, usb3;
- unsigned int i;
+ int err = 0, usb3_companion_port;
+ unsigned int i, j;
xudc->utmi_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys,
sizeof(*xudc->utmi_phy), GFP_KERNEL);
@@ -3520,7 +3520,7 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
if (IS_ERR(xudc->utmi_phy[i])) {
err = PTR_ERR(xudc->utmi_phy[i]);
dev_err_probe(xudc->dev, err,
- "failed to get usb2-%d PHY\n", i);
+ "failed to get PHY for phy-name usb2-%d\n", i);
goto clean_up;
} else if (xudc->utmi_phy[i]) {
/* Get usb-phy, if utmi phy is available */
@@ -3539,19 +3539,30 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc)
}
/* Get USB3 phy */
- usb3 = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i);
- if (usb3 < 0)
+ usb3_companion_port = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i);
+ if (usb3_companion_port < 0)
continue;
- snprintf(phy_name, sizeof(phy_name), "usb3-%d", usb3);
- xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name);
- if (IS_ERR(xudc->usb3_phy[i])) {
- err = PTR_ERR(xudc->usb3_phy[i]);
- dev_err_probe(xudc->dev, err,
- "failed to get usb3-%d PHY\n", usb3);
- goto clean_up;
- } else if (xudc->usb3_phy[i])
- dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3);
+ for (j = 0; j < xudc->soc->num_phys; j++) {
+ snprintf(phy_name, sizeof(phy_name), "usb3-%d", j);
+ xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name);
+ if (IS_ERR(xudc->usb3_phy[i])) {
+ err = PTR_ERR(xudc->usb3_phy[i]);
+ dev_err_probe(xudc->dev, err,
+ "failed to get PHY for phy-name usb3-%d\n", j);
+ goto clean_up;
+ } else if (xudc->usb3_phy[i]) {
+ int usb2_port =
+ tegra_xusb_padctl_get_port_number(xudc->utmi_phy[i]);
+ int usb3_port =
+ tegra_xusb_padctl_get_port_number(xudc->usb3_phy[i]);
+ if (usb3_port == usb3_companion_port) {
+ dev_dbg(xudc->dev, "USB2 port %d is paired with USB3 port %d for device mode port %d\n",
+ usb2_port, usb3_port, i);
+ break;
+ }
+ }
+ }
}
return err;
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2024-03-05 16:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-05 16:11 [PATCH 0/2] Fix incorrect USB3 phy parsing in tegra-xudc Wayne Chang
2024-03-05 16:11 ` [PATCH 1/2] phy: tegra: xusb: Add API to retrieve the port number of phy Wayne Chang
2024-03-05 16:11 ` Wayne Chang [this message]
2024-03-05 22:10 ` [PATCH 2/2] usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic Greg KH
2024-03-07 2:55 ` Wayne Chang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240305161122.1254099-3-waynec@nvidia.com \
--to=waynec@nvidia.com \
--cc=gregkh@linuxfoundation.org \
--cc=jckuo@nvidia.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox