From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-phy@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>,
linux-kernel@vger.kernel.org, Michal Simek <michal.simek@amd.com>,
linux-arm-kernel@lists.infradead.org,
Kishon Vijay Abraham I <kishon@kernel.org>,
Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH 3/3] phy: zynqmp: Add debugfs support
Date: Mon, 22 Apr 2024 14:58:03 -0400 [thread overview]
Message-ID: <20240422185803.3575319-4-sean.anderson@linux.dev> (raw)
In-Reply-To: <20240422185803.3575319-1-sean.anderson@linux.dev>
Add support for printing some basic status information to debugfs. This
is helpful when debugging phy consumers to make sure they are configuring
the phy appropriately.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---
drivers/phy/xilinx/phy-zynqmp.c | 54 +++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
index 08c88dcd7799..e2e86943e9f3 100644
--- a/drivers/phy/xilinx/phy-zynqmp.c
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -13,6 +13,7 @@
*/
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
@@ -122,6 +123,15 @@
#define ICM_PROTOCOL_DP 0x4
#define ICM_PROTOCOL_SGMII 0x5
+static const char *const xpsgtr_icm_str[] = {
+ [ICM_PROTOCOL_PD] = "powered down",
+ [ICM_PROTOCOL_PCIE] = "PCIe",
+ [ICM_PROTOCOL_SATA] = "SATA",
+ [ICM_PROTOCOL_USB] = "USB",
+ [ICM_PROTOCOL_DP] = "DisplayPort",
+ [ICM_PROTOCOL_SGMII] = "SGMII",
+};
+
/* Test Mode common reset control parameters */
#define TM_CMN_RST 0x10018
#define TM_CMN_RST_EN 0x1
@@ -768,6 +778,48 @@ static struct phy *xpsgtr_xlate(struct device *dev,
return ERR_PTR(-EINVAL);
}
+/*
+ * DebugFS
+ */
+
+static int xpsgtr_status_read(struct seq_file *seq, void *data)
+{
+ struct xpsgtr_phy *gtr_phy = seq->private;
+ struct clk *clk;
+ u32 pll_status;
+
+ mutex_lock(>r_phy->phy->mutex);
+ pll_status = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
+ clk = gtr_phy->dev->clk[gtr_phy->refclk];
+
+ seq_printf(seq, "Lane: %u\n", gtr_phy->lane);
+ seq_printf(seq, "Protocol: %s\n",
+ xpsgtr_icm_str[gtr_phy->protocol]);
+ seq_printf(seq, "Instance: %u\n", gtr_phy->instance);
+ seq_printf(seq, "Reference clock: %u (%pC)\n", gtr_phy->refclk, clk);
+ seq_printf(seq, "Reference rate: %lu\n", clk_get_rate(clk));
+ seq_printf(seq, "PLL locked: %s\n",
+ pll_status & PLL_STATUS_LOCKED ? "yes" : "no");
+
+ mutex_unlock(>r_phy->phy->mutex);
+ return 0;
+}
+
+static int xpsgtr_status_open(struct inode *inode, struct file *f)
+{
+ struct xpsgtr_phy *gtr_phy = inode->i_private;
+
+ return single_open(f, xpsgtr_status_read, gtr_phy);
+}
+
+static const struct file_operations xpsgtr_status_ops = {
+ .owner = THIS_MODULE,
+ .open = xpsgtr_status_open,
+ .release = single_release,
+ .read = seq_read,
+ .llseek = seq_lseek
+};
+
/*
* Power Management
*/
@@ -917,6 +969,8 @@ static int xpsgtr_probe(struct platform_device *pdev)
gtr_phy->phy = phy;
phy_set_drvdata(phy, gtr_phy);
+ debugfs_create_file("status", 0444, phy->debugfs, gtr_phy,
+ &xpsgtr_status_ops);
}
/* Register the PHY provider. */
--
2.35.1.1320.gc452695387.dirty
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2024-04-22 18:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-22 18:58 [PATCH 0/3] phy: zynqmp: A PCIe fix and debugfs support Sean Anderson
2024-04-22 18:58 ` [PATCH 1/3] phy: zynqmp: Store instance instead of type Sean Anderson
2024-04-23 6:25 ` Michal Simek
2024-04-23 15:02 ` Sean Anderson
2024-04-24 6:38 ` Michal Simek
2024-04-25 15:28 ` Sean Anderson
2024-04-22 18:58 ` [PATCH 2/3] phy: zynqmp: Don't wait for PLL lock on nonzero PCIe lanes Sean Anderson
2024-04-23 6:25 ` Michal Simek
2024-04-23 15:03 ` Sean Anderson
2024-04-22 18:58 ` Sean Anderson [this message]
2024-05-04 11:58 ` [PATCH 3/3] phy: zynqmp: Add debugfs support Vinod Koul
2024-05-06 14:51 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240422185803.3575319-4-sean.anderson@linux.dev \
--to=sean.anderson@linux.dev \
--cc=kishon@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=michal.simek@amd.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).