Re: [PATCH v2] phy: qcom: qmp: Add debug prints for register writes

[Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>]

On Wed, Jul 31, 2024 at 09:26:27PM -0500, Bjorn Andersson wrote:
> On Wed, Jul 31, 2024 at 05:26:37PM GMT, Manivannan Sadhasivam wrote:
> > These register prints are useful to validate the init sequence against the
> > Qcom internal documentation and also to share with the Qcom hw engineers to
> > debug issues related to PHY.
> > 
> 
> I've written this patch every time I've touched one of these PHYs, so I
> certainly like this.
> 

Me too :) I've been carrying this as an out-of-tree patch ever since I started
bringing up Qcom chipsets.

> > Sample debug prints:
> > 
> > QMP PHY: Writing Reg: QSERDES_V5_COM_SYSCLK_EN_SEL Offset: 0x0094 Val: 0xd9
> > QMP PHY: Writing Reg: QSERDES_V5_COM_HSCLK_SEL Offset: 0x0158 Val: 0x11
> 
> That said, with multiple instances of PHYs being configured at about the
> same time it seems this would benefit greatly from something identifying
> which PHY instance the write relates to?
> 
> dev_dbg() would certainly be nice...
> 

I understood that after comments from Dmitry. So v4 has this:

qcom-qmp-pcie-phy 1c0e000.phy: Writing Reg: QSERDES_V5_COM_SYSCLK_EN_SEL Offset: 0x0094 Val: 0xd9

- Mani

> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > 
> > Changes in v2:
> > 
> > * Modifed the debug print to include reg offset
> > 
> >  drivers/phy/qualcomm/phy-qcom-qmp-common.h | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-common.h b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > index 799384210509..40beb413328f 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-common.h
> > @@ -9,6 +9,7 @@
> >  struct qmp_phy_init_tbl {
> >  	unsigned int offset;
> >  	unsigned int val;
> > +	char *name;
> 
> const?
> 
> Regards,
> Bjorn
> 
> >  	/*
> >  	 * mask of lanes for which this register is written
> >  	 * for cases when second lane needs different values
> > @@ -20,6 +21,7 @@ struct qmp_phy_init_tbl {
> >  	{				\
> >  		.offset = o,		\
> >  		.val = v,		\
> > +		.name = #o,		\
> >  		.lane_mask = 0xff,	\
> >  	}
> >  
> > @@ -27,6 +29,7 @@ struct qmp_phy_init_tbl {
> >  	{				\
> >  		.offset = o,		\
> >  		.val = v,		\
> > +		.name = #o,		\
> >  		.lane_mask = l,		\
> >  	}
> >  
> > @@ -45,6 +48,8 @@ static inline void qmp_configure_lane(void __iomem *base,
> >  		if (!(t->lane_mask & lane_mask))
> >  			continue;
> >  
> > +		pr_debug("QMP PHY: Writing Reg: %s Offset: 0x%04x Val: 0x%02x\n",
> > +			t->name, t->offset, t->val);
> >  		writel(t->val, base + t->offset);
> >  	}
> >  }
> > -- 
> > 2.25.1
> > 
> > 

-- 
மணிவண்ணன் சதாசிவம்

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy