From: Xu Yang <xu.yang_2@nxp.com>
To: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, gregkh@linuxfoundation.org, Frank.Li@nxp.com,
jun.li@nxp.com, l.stach@pengutronix.de, aford173@gmail.com,
hongxing.zhu@nxp.com, alexander.stein@ew.tq-group.com
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-usb@vger.kernel.org
Subject: [PATCH 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node
Date: Fri, 2 Aug 2024 17:17:02 +0800 [thread overview]
Message-ID: <20240802091702.2057294-5-xu.yang_2@nxp.com> (raw)
In-Reply-To: <20240802091702.2057294-1-xu.yang_2@nxp.com>
This board has one Type-C port which has USB3 capability. This will
add typec nodes and enable usb3 node.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
.../boot/dts/freescale/imx95-19x19-evk.dts | 81 +++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index d14a54ab4fd4..46a9cd3d4403 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -5,6 +5,7 @@
/dts-v1/;
+#include <dt-bindings/usb/pd.h>
#include "imx95.dtsi"
/ {
@@ -99,6 +100,48 @@ i2c7_pcal6524: i2c7-gpio@22 {
interrupt-parent = <&gpio5>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
};
+
+ ptn5110: tcpc@50 {
+ compatible = "nxp,ptn5110", "tcpci";
+ reg = <0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <0>;
+ self-powered;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ typec_con_hs: endpoint {
+ remote-endpoint = <&usb3_data_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ typec_con_ss: endpoint {
+ remote-endpoint = <&usb3_data_ss>;
+ };
+ };
+ };
+ };
+ };
};
&lpuart1 {
@@ -128,6 +171,38 @@ &pcie1 {
status = "okay";
};
+&usb3 {
+ status = "okay";
+};
+
+&usb3_phy {
+ status = "okay";
+
+ port {
+ usb3_data_ss: endpoint {
+ remote-endpoint = <&typec_con_ss>;
+ };
+ };
+};
+
+&usb3_dwc3 {
+ dr_mode = "otg";
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+ usb-role-switch;
+ role-switch-default-mode = "peripheral";
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ status = "okay";
+
+ port {
+ usb3_data_hs: endpoint {
+ remote-endpoint = <&typec_con_hs>;
+ };
+ };
+};
+
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -245,6 +320,12 @@ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e
>;
};
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14 0x31e
+ >;
+ };
+
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2024-08-02 9:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-02 9:16 [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" Xu Yang
2024-08-02 9:16 ` [PATCH 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95 Xu Yang
2024-08-04 14:17 ` Krzysztof Kozlowski
2024-08-02 9:17 ` [PATCH 3/5] phy: fsl-imx8mq-usb: add tca function driver " Xu Yang
2024-08-02 13:52 ` Dmitry Baryshkov
2024-08-05 3:27 ` Xu Yang
2024-11-29 15:01 ` Amit Singh Tomar
2024-08-02 9:17 ` [PATCH 4/5] arm64: dts: imx95: add usb3 related nodes Xu Yang
2024-08-02 9:17 ` Xu Yang [this message]
2024-08-04 14:16 ` [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" Krzysztof Kozlowski
2024-08-05 3:36 ` Xu Yang
2024-08-05 7:04 ` Xu Yang
2024-08-05 7:22 ` Krzysztof Kozlowski
2024-08-05 8:22 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240802091702.2057294-5-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=Frank.Li@nxp.com \
--cc=aford173@gmail.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=kernel@pengutronix.de \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox